Skip to main content
PCI-E X1 to SATA 3.0 Controller Card, 2-Port SATA III 6Gbps Expansion Cards, Supports PCI-Express (1X 4X 8X 16X) Slot, Support SSD and HDD, for Windows10/7/8/XP/Vista/linux
ACTIMED

ACTIMED PCI-E X1 to SATA 3.0 Controller Card

Bottom line: The ACTIMED PCI-E X1 to SATA 3.0 Controller Card: JMicron JMB582 chipset with a heat sink included; main trade-off: only two SATA ports; larger arrays need a bigger card.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar expansion cards

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ JMicron JMB582 chipset with a heat sink included
  • ✓ Rated 500-550MB/s in a PCIe 3.0 slot, near full SATA SSD speed
  • ✓ x1 card fits x1, x4, x8 or x16 PCIe slots
  • ✓ Windows XP through 10 plus Linux listed as supported
  • ✓ Works with SATA 2.0/1.0 drives and PCIe 2.0 slots

Cons

  • ✗ Only two SATA ports; larger arrays need a bigger card
  • ✗ Drops to 200-300MB/s in PCIe 1.0 slots
  • ✗ Both ports share one PCIe x1 lane
  • ✗ Windows 11 and macOS not listed as supported

Manufacturer description

Out of SATA ports? The ACTIMED PCI-E x1 to SATA 3.0 controller card adds two SATA III 6Gbps ports through any open PCIe slot. It uses a JMicron JMB582 chipset and has a heat sink to keep the controller cool under sustained transfers. The card has a PCIe x1 edge, so it fits x1, x4, x8 or x16 slots. It works best in a PCIe 3.0 slot, where ACTIMED rates it at 500-550MB/s. That is enough for a SATA SSD to run near full speed. In a PCIe 2.0 slot, expect 380-450MB/s. Older PCIe 1.0 boards drop to 200-300MB/s, which still suits hard drives and backup volumes. The ports also work with older SATA 2.0…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored ACTIMED PCI-E X1 to SATA 3.0 Controller Card using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. ACTIMED's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this SATA card work in a PCIe x16 slot?

Yes. It has a PCIe x1 connector, which fits x1, x4, x8 and x16 slots. It is designed for PCIe 3.0 and also works in PCIe 2.0 slots.

How fast is it with a SATA SSD?

ACTIMED rates it at 500-550MB/s in a PCIe 3.0 slot, 380-450MB/s in a PCIe 2.0 slot and 200-300MB/s in a PCIe 1.0 slot. Check your motherboard manual to see which PCIe version your slot supports.

Does it work with Windows XP for a retro PC build?

Yes. Windows XP is listed as supported, along with Windows Vista, 7, 8 and 10, Windows Server 2003 and 2008, and Linux. Your motherboard still needs a free PCIe slot.

Can I use older SATA II hard drives with it?

Yes. The two ports are SATA 3.0 (6Gbps) and work with older SATA 2.0 and 1.0 drives, so you can connect both hard drives and SSDs.

What should I do if my drive is not detected after installing the card?

The card is plug-and-play and supports hot-swapping. If a drive still does not show up, the manufacturer suggests merging the drive's partitions and trying again. For anything else, contact the seller; the listing mentions a 30-day return window.

Key Features

  • 【Extensive compatibility】ACTIMED PCIE X1 to 2 port SATA expansion card supporting PCIE 3.0 slots, and backward compatible with PCIE 2.0 slots. Adopt SATA 3.0 interface and backward compatible with SATA 2.0 / 1.0 interface.（It is recommended to use in PCIE 3.0 slot to fully utilize the performance of SSD high-speed transfer）
  • 【Security and stability】JMICRON-JMB582 chipset is used to improve the stability and security of PCIE SATA card. Includes heat sink, which can control temperature well and prevent damage from high temperature.
  • 【Plug-and-play】Easy installation, plug-and-play, hot-swappable support.The fastest speed in a PCI-E 3.0 slot is 500-550M/S. The fastest speed in a PCI-E 2.0 slot is 380-450M/S. If plugged into a PCI-E 1.0 slot, the speed is only 200-300M/S. (Please consult your motherboard manufacturer for PCI-E supported versions). If, however, you are unable to plug and play, try merging the hard disk partitions and try again.
  • 【Compatible Slots and Systems】PCIE X1 interface, compatible with 1X/4X/8X/16 slots (transfer speed up to SATA III 6 Gbps.)Support Windows 7/8/10/XP/2003/2008/Linux.
  • 【UFUNIN Customer Service】Please contact customer service if you have any questions about our product. We offer you a lifetime customer service. You have 30 days to return the product if you are not satisfied.If you have any fit issues, please contact customer service. We will suggest a solution for you.

Full Specifications

BrandACTIMED
StyleClassic
Style NameClassic
Model NumberSATA-2 port
CompatibilityLinux
Mfr Part Number2SATA
Number of Items1
Compatible DevicesPersonal Computer, Laptop
Hardware InterfacePCIE x 1
Full listing titlePCI-E X1 to SATA 3.0 Controller Card, 2-Port SATA III 6Gbps Expansion Cards, Supports PCI-Express (1X 4X 8X 16X) Slot, Support SSD and HDD, for Windows10/7/8/XP/Vista/linux

Ready to buy?

PCI-E X1 to SATA 3.0 Controller Card, 2-Port SATA III 6Gbps Expansion Cards, Supports PCI-Express (1X 4X 8X 16X) Slot, Support SSD and HDD, for Windows10/7/8/XP/Vista/linux is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Expansion Cards

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
PCI-E X1 to SATA 3.0 Controller Card, 2-Port SATA III 6Gbps Expansion Cards, Supports PCI-Express (1X 4X 8X 16X) Slot, Support SSD and HDD, for Windows10/7/8/XP/Vista/linux
View on Amazon →