Skip to main content
G.SKILL Ripjaws S5 Series DDR5 RAM (Intel XMP 3.0) 64GB (2x32GB) 6000MT/s CL30-40-40-96 1.40V Desktop Computer Memory U-DIMM - Matte Black (F5-6000J3040G32GX2-RS5K)
G.SKILL

G.SKILL Ripjaws S5 Series DDR5 RAM (Intel XMP 3.0) 64GB (2x32GB) 6000MT/s CL30-40-40-96 1.40V Desktop Computer Memory U-DIMM - Matte Black (F5-6000J3040G32GX2-RS5K)

Bottom line: The G.SKILL Ripjaws S5 Series DDR5 RAM ($1,249.99 on Amazon as of 2026-11-20 11:15 UTC): 64GB in just two DIMMs, leaving two slots free on a four-slot board; main trade-off: non-ECC, so it is unsuited to workstations that require error correction.

$1249.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For desktop and laptop memory upgrades, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 64GB in just two DIMMs, leaving two slots free on a four-slot board
  • ✓ CL30 primary timing at DDR5-6000 is tight for a 32GB-per-stick kit
  • ✓ Intel XMP 3.0 profile stored on-module; one BIOS toggle hits 6000MT/s
  • ✓ Low-profile matte black heatspreader clears large tower air coolers

Cons

  • ✗ Non-ECC, so it is unsuited to workstations that require error correction
  • ✗ XMP profile only; no AMD EXPO profile for Ryzen AM5 builds
  • ✗ 1.40V XMP runs above the 1.10V DDR5 JEDEC default, adding heat
  • ✗ Validated list covers Intel Z890/Z790/Z690/B860/B760/B660 only

Manufacturer description

The G.SKILL Ripjaws S5 DDR5 64GB kit (F5-6000J3040G32GX2-RS5K) pairs two 32GB U-DIMMs rated for DDR5-6000 at CL30-40-40-96 and 1.40V, giving you the capacity headroom for large Photoshop composites, multi-VM homelabs, local LLM offload, and 4K timelines without the latency penalty most high-capacity kits carry. Intel XMP 3.0 is baked into the SPD, so a single BIOS toggle takes the modules from their JEDEC default boot speed to the full 6000MT/s rating on validated hardware. G.SKILL lists support across Intel Z890, Z790, Z690, B860, B760, and B660 boards, and the RAM Configurator tool on…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for G.SKILL Ripjaws S5 Series DDR5 RAM (Intel XMP 3.0) 64GB (2x32GB)…, so this read rests on the manufacturer's listed specs and the current price in the memory (ram) category (how we evaluate). Compare with similarly-priced alternatives in the memory (ram) category before committing. On the listing's own facts, the case for it is "64GB in just two DIMMs, leaving two slots free on a four-slot board"; the main trade-off is "Non-ECC, so it is unsuited to workstations that require error correction". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for memory (ram) of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this 64GB kit work with AMD Ryzen?

The kit ships a JEDEC default profile plus an Intel XMP 3.0 overclock profile, and G.SKILL lists validation for Intel Z890, Z790, Z690, B860, B760, and B660 platforms. There is no EXPO profile for AMD. Check G.SKILL's memory QVL or RAM Configurator tool for your specific board.

Why is my system showing a slower speed than 6000MT/s?

Memory kits boot at the JEDEC default SPD speed with default BIOS settings. To reach the rated DDR5-6000 CL30-40-40-96 at 1.40V, you must enable the XMP profile in your BIOS. That is an act of overclocking, and the result depends on your motherboard and CPU.

Can I add this to RAM I already have installed?

No. G.SKILL explicitly warns not to mix memory kits, because modules are sold in matched sets designed to run together. Mixing kits will result in stability issues or system failure. Run this 2x32GB kit on its own.

How many DIMM slots does this kit use?

Two. The 64GB total capacity is delivered as 2x32GB 288-pin DDR5 U-DIMMs, so on a standard four-slot ATX board you install them in the two channel-matched slots and leave two open.

Is this memory ECC?

No, the modules are non-ECC DDR5 U-DIMMs built for desktop PC and gaming use. If your workload requires error-correcting memory, this kit is not the right fit. Check the product listing for current warranty terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • G.SKILL Ripjaws S5 Series DDR5 U-DIMM Memory Kit, Model: F5-6000J3040G32GX2-RS5K
  • 64GB total capacity kit containing 2x32GB modules, rated for up to DDR5-6000 CL30-40-40-96 at 1.40V
  • Non-ECC, DDR5 U-DIMM, 288-pin, for Desktop PC & Gaming
  • Includes JEDEC default profile, and Intel XMP 3.0 memory overclock profile
  • Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
  • For Intel Z890, Intel Z790, Intel Z690, Intel B860, Intel B760, Intel B660 platforms. Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.

Full Specifications

BrandG.SKILL
Voltage1.4 Volts
RAM Size64 GB
Model NameRipJaws S5
Unit Count1.0 Count
Form FactorDIMM
Memory Speed6000 MT/s
Model NumberF5-6000J3040G32GX2-RS5K
CompatibilityPC
Item Type NameDDR5 SDRAM U-DIMM INTEL XMP
Number of Pins288
Mfr Part NumberF5-6000J3040G32GX2-RS5K
Memory GenerationDDR5
Compatible DevicesDesktop
Data Transfer Rate6000 MHz
Memory Form FactorUDIMM
Additional FeaturesIntel XMP 3.0
Computer Memory Size64 GB
Warranty DescriptionLimited Lifetime Manufacturer
RAM Memory TechnologyDDR5

Ready to buy?

G.SKILL Ripjaws S5 Series DDR5 RAM (Intel XMP 3.0) 64GB (2x32GB) 6000MT/s CL30-40-40-96 1.40V Desktop Computer Memory U-DIMM - Matte Black (F5-6000J3040G32GX2-RS5K) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $1,249.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Read our analysis

SpecPicks coverage that features this Memory (RAM).

Related Memory (RAM)

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
G.SKILL Ripjaws S5 Series DDR5 RAM (Intel XMP 3.0) 64GB (2x32GB) 6000MT/s CL30-40-40-96 1.40V Desktop Computer Memory U-DIMM - Matte Black (F5-6000J3040G32GX2-RS5K)
$1,249.99
View on Amazon →