FREENOVE
FREENOVE 5 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+
Bottom line: The FREENOVE 5 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+ ($35.95 on Amazon as of 2026-10-21 10:13 UTC): Connects via MIPI DSI, leaving the Pi's HDMI ports free; main trade-off: no HDMI input; works only with listed Raspberry Pi models.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Connects via MIPI DSI, leaving the Pi's HDMI ports free
- ✓ 5-point capacitive multi-touch under Raspberry Pi OS
- ✓ IPS panel with wide viewing angles at 5 inches
- ✓ Driver-free on new or unmodified Raspberry Pi OS installs
- ✓ Supports Pi 5 (CAM/DISP port) back to the Pi 1A+
Cons
- ✗ No HDMI input; works only with listed Raspberry Pi models
- ✗ 800x480 resolution is low for desktop browsing or text
- ✗ Ubuntu supports single-touch only, not multi-touch
- ✗ Raspberry Pi board and accessories are not included
Manufacturer description
The FREENOVE 5 Inch Touchscreen Monitor gives your Raspberry Pi a compact display with built-in touch input, using a single ribbon connection instead of HDMI. It plugs into the Pi's MIPI DSI display port: the connector marked CAM/DISP on the Raspberry Pi 5, or DISPLAY on the 4B and earlier boards. That leaves your HDMI ports free. The panel is a 5-inch IPS screen at 800x480 pixels, with wide viewing angles and a 5-point capacitive touch layer. On Raspberry Pi OS, multi-touch works. On Ubuntu, touch is limited to a single point. FREENOVE describes the display as driver-free: on a fresh…
SpecPicks Verdict
SpecPicks scored FREENOVE 5 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+ using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. FREENOVE's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the FREENOVE 5 inch touchscreen work with the Raspberry Pi 5?
Yes. On the Raspberry Pi 5 it connects to the port marked CAM/DISP. It also supports the Pi 4B, 3B+, 3B, 3A+, 2B, 1B+ and 1A+, where it uses the port marked DISPLAY.
Can I use this screen with a laptop, PC, or other single-board computer over HDMI?
No. The display has no HDMI port and connects only through the Raspberry Pi's MIPI DSI display connector. FREENOVE states it is not compatible with any other device.
Do I need to install drivers to get the display working?
No drivers are needed on a new Raspberry Pi OS install, or on one whose display configuration hasn't been changed. If you've edited the display settings, you may need to restore them first.
Does multi-touch work on Ubuntu?
No. All 5 touch points work on Raspberry Pi OS. Ubuntu supports single touch only, so pinch and multi-finger gestures won't register there.
What is the screen resolution and panel type?
It is a 5-inch IPS panel at 800x480 pixels, with wide viewing angles and a 5-point capacitive touch layer. Check the product listing for exact physical dimensions.
Key Features
- Specifically for Raspberry Pi Only need the connection to the display port (marked CAM/DISP on Raspberry Pi 5, DISPLAY on 4 and previous)
- Compatible Models Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ (No HDMI, not compatible with any other device)
- Compatible Systems Raspberry Pi OS (multi-touch available) / Ubuntu (single touch only)
- Screen Parameters 5 inch, 800x480 pixel, IPS type wide viewing angle, 5-point touch capacitive screen
- Easy to Use No configuration is required (for new and configuration-unchanged systems)
Full Specifications
| ASIN | B0B455LDKH |
|---|---|
| Brand | FREENOVE |
| Color | 5 inch IPS touchscreen |
| Shape | Rectangular |
| Voltage | 3 Volts |
| Resolution | 800 x 480 pixel |
| Is Electric | No |
| Item Weight | 0.19 Kilograms |
| Pixel Pitch | 7.84 |
| Screen Size | 5 Inches |
| Aspect Ratio | 1.661 |
| Display Type | LCD |
| Manufacturer | Freenove |
| Model Number | FNK0078A |
| Refresh Rate | 60 Hz |
| Mounting Type | Desk Mount |
| Screen Finish | Glossy |
| Viewing Angle | 160 Degrees |
| Warranty Type | 1 Year Limited Warranty |
| Built-In Media | 1 x 5 inch touchscreen monitor,1 x Ribbon cable (5cm),1 x Ribbon cable (10cm),2 x M2.5*12 screw,4 x M2.5*4 screw,4 x M2.5*4+4 standoff,2 x Monitor stand |
| Full listing title | FREENOVE 5 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free MIPI DSI Port |
Ready to buy?
FREENOVE 5 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free MIPI DSI Port is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Single-Board Computers
FREENOVE 5 Inch Touchscreen Monitor for… head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- JADEPUFFER Agentic Ransomware: Why a Local AI Rig Changes Your Threat Model
- Best Classic Retro RPGs to Play in 2026 (Top 15)
- PebbleOS Comes to the Raspberry Pi RP2350: What the Port Means for Tinkerers
- Can You Run Kimi K3 Locally? VRAM Math for the New Open Model
- Kingston A400 960GB vs Crucial BX500 1TB for a PS4 Pro SSD Upgrade
- Ryzen AI Max+ 395 LLM Performance: What to Expect
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5070
- Best CPU Cooler for Ryzen 7 5800X and 5700X in 2026
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel
- DiffusionGemma Runs Locally: Google's Diffusion Text Model on a 12GB RTX 3060
- Raspberry Pi 500 Plus: The Real Lineup vs. the Rumors
- Best SSD for a Local-LLM Rig in 2026: NVMe vs SATA
- Best Game Controllers for PC and Emulation in 2026
- Best CPU Cooler for AM5 and LGA1700 Overclocking (2026)
- StarCraft Brood War in 2026: Joining Battle.net Classic, the Fish Server, and ASL Pro Circuit
- Intel Arc GPU for Stable Diffusion: Setup & Benchmarks
- Fable 5 as Manager: The Delegate-to-Sonnet-5 Cost Pattern
- Intel Arc Pro B60 Creator 24GB: Workstation GPU Guide
- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
- Fable 5 Cloud vs an RTX 3060 12GB Local Rig: Is Local Still Worth It in 2026?
- Mac Mini M4 vs RTX 3060 12GB for Local LLMs: Which Actually Wins?
- Best Internal SSD for Gaming PC Build in 2026
- Logitech G502 Hero in 2026: Is the $40 Classic Still the Mouse to Beat?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090