be quiet! Silent Wings 4 140mm PWM High Speed 1900 RPM Premium Low Noise Cooling Fan | 4-Pin | BL097
Bottom line: The be quiet! Silent Wings 4 140mm PWM High Speed 1900 RPM Premium Low: Rated 29.3 dB(A) at maximum speed, not just at idle RPM; main trade-off: high-speed 1900 RPM variant costs more than standard Silent Wings 4.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Rated 29.3 dB(A) at maximum speed, not just at idle RPM
- ✓ 300,000-hour fluid-dynamic bearing rating suits 24/7 builds
- ✓ Funnel-shaped frame plus tight blade gap raises static pressure
- ✓ Ships with both anti-vibration and rigid radiator mounts
Cons
- ✗ High-speed 1900 RPM variant costs more than standard Silent Wings 4
- ✗ 140mm only - no 120mm mounting without an adapter bracket
- ✗ All-black design has no RGB or addressable lighting
- ✗ Audible at full 1900 RPM despite the low-noise branding
Manufacturer description
The be quiet! Silent Wings 4 140mm PWM High Speed is built for the cases where a standard 140mm fan runs out of headroom: dense radiators, thick heatsink fin stacks, and restrictive front panels. Its funnel-shaped frame and tightened blade-to-frame clearance push static pressure up, so airflow actually makes it through the obstruction instead of spilling around it. The 6-pole, 3-phase motor keeps power draw and vibration low, and be quiet! rates maximum operation at 29.3 dB(A) - meaning the fan stays effectively inaudible through the middle of its PWM curve and only becomes noticeable at…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for be quiet! Silent Wings 4 140mm PWM High Speed 1900 RPM Premium Low…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Rated 29.3 dB(A) at maximum speed, not just at idle RPM"; the main trade-off is "High-speed 1900 RPM variant costs more than standard Silent Wings 4". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How loud is the Silent Wings 4 140mm high speed at full RPM?
be quiet! rates maximum operation at 29.3 dB(A). The 6-pole, 3-phase motor design keeps it virtually inaudible at mid-speed, with noise rising toward the 1900 RPM ceiling.
Is this fan good for radiators or just case airflow?
Both. The reduced blade-to-frame distance and funnel-shaped frame generate high static pressure for radiators and heatsinks, and the box includes rigid plastic mounts specifically for that use alongside case mounting.
What mounting hardware comes in the box?
Two options: pre-installed anti-vibration mounts that damp chassis vibration, and separate plastic mounts intended for radiators and heat sinks. No extra purchase is needed for either scenario.
How long will this fan last?
The advanced fluid-dynamic bearing (FDB) is rated for up to 300,000 hours of service life. The same bearing reduces vibration transfer, which is part of why the fan stays quiet over time.
Will it work with a 3-pin fan header?
This is a 4-pin PWM fan (model BL097), so PWM speed control requires a 4-pin header. Check your motherboard or fan controller documentation for header type and any voltage-control fallback behavior.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Silent Wings 4 140mm PWM high-speed is the fan of choice for all possible operations. Be it in a case, on radiators or heat sinks – Features like the silence-optimized fan blades and the funnel shaped fan frame make Silent Wings 4 140mm PWM high-speed a fan that makes no compromises between very quiet operation and highest performance.
- Silent Wings 4 140mm PWM high-speed makes for extraordinary air pressure and, therefore, significant increases in the system’s performance. The decreased distance between the fan blades and the frame makes it possible. By that, the Silent Wings 4 140mm PWM high-speed allows the user to run even the most demanding applications.
- Silent Wings 4 140mm PWM high-speed has 2 mounting options in the scope of delivery. The pre-installed anti-vibration mounting reduces noise-generating vibrations to a minimum. For radiators and heat sinks, the plastic mounting is the first choice. Both solutions have in common that they enable virtually inaudible operation at regular speed.
- The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 29.3dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed.
- The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings 4 140mm PWM high-speed.
- Be it as a radiator fan or in the case: Silent Wings 4 140mm PWM high-speed always makes a good impression. The all-black design combined with the high-grade fan sticker makes the fan shine in any system. This makes Silent Wings 4 140mm PWM high-speed a high performant and an incredibly good-looking fan.
Full Specifications
| Brand | be quiet! |
|---|---|
| Model | BL097 |
| Voltage | 12 Volts (DC) |
| Wattage | 5.7 watts |
| Material | Copper |
| Set Name | PWM High-Speed |
| Unit Count | 1.0 Count |
| Noise Level | 29.3 Decibels |
| Part Number | BL097 |
| Material Type | Copper |
| Cooling Method | Fan |
| Number of Items | 1 |
| Vibration/Rumble | Yes |
| Air Flow Capacity | 78.4 Cubic Feet Per Minute |
| Compatible Devices | Radiator, Desktop, Graphic Cards |
| Power Connector Type | 4-Pin |
| Warranty Description | 1 year |
| Maximum Rotational Speed | 1900 RPM |
| Item Dimensions L x W x H | 5.51"L x 5.51"W x 0.98"H |
| Global Trade Identification Number | 04260052188897 |
Benchmark data for other processors
Ready to buy?
be quiet! Silent Wings 4 140mm PWM High Speed 1900 RPM Premium Low Noise Cooling Fan | 4-Pin | BL097 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- ASUS ProArt PA27USD Lands: 27-Inch OLED Aims at Gaming
- Best Raspberry Pi Alternative for Home Assistant (2026)
- Intel Arc Stable Diffusion Guide: Setup & Benchmarks 2025
- Build a DualSense PC Dongle with a Raspberry Pi Pico: Adaptive Triggers and Haptics on Windows
- Best Budget AM4 Gaming PC Parts in 2026
- Best Budget PC Gaming Upgrades Under $200 in 2026
- DualSense vs GameSir G7 SE for PC Gaming in 2026: Which Controller Wins?
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- ComfyUI on an RTX 3060 12GB: Real Image-Gen Throughput in 2026
- Best 1440p Gaming Monitor for an RTX 3060: ASUS TUF 2K vs KOORUI 4K
- Grok Imagine Hits #5: Can a $300 RTX 3060 Run Local Image AI?
- Reve 2.0 Debuts at #2 for Text-to-Image: Can You Run Local Image Gen on an RTX 3060?
- Best Gaming Monitors Under $400 in 2026
- LG UltraGear 52G930B 52-Inch 5K Gaming Monitor Review
- 3dfx Voodoo5 5500 AGP tuning guide — 2026 edition
- RTX 3060 12GB vs RTX 4060 for 1080p Gaming: Which Wins in 2026?
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput and VRAM Limits in 2026
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- Local LLM Hardware in 2025: Picking GPUs, CPUs & RAM
- 3dfx Voodoo5 5500 AGP Install Guide: Glide, 4-Sample FSAA, and the Last Great 3dfx Driver Stack for Win98SE
- Anthropic's Fable 5 Ban and Jailbreak: What It Means for Local-LLM Resilience
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090