Skip to main content
SUNMON SoloCast 2 Microphone Pop Filter Windscreen - Noise Reduction Gaming Mic Foam Covers, Mic Foam Cover Pop Filter Compatible with HyperX SoloCast
SUNMON

SUNMON SoloCast 2 Microphone Pop Filter Windscreen

Bottom line: The SUNMON SoloCast 2 Microphone Pop Filter Windscreen: Shaped for the HyperX SoloCast 2, and also fits the original SoloCast; main trade-off: arrives vacuum-packed and needs time to regain its shape.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Shaped for the HyperX SoloCast 2, and also fits the original SoloCast
  • ✓ High-density elastic foam grips the mic head without clips
  • ✓ Softens P and B plosives and breath noise on close-up speech
  • ✓ Keeps dust and saliva off the SoloCast's grille
  • ✓ Light slip-on cover with no stand or arm to mount

Cons

  • ✗ Arrives vacuum-packed and needs time to regain its shape
  • ✗ Only made for the SoloCast models, so other mics may not fit
  • ✗ Foam does little against room echo or keyboard noise
  • ✗ Listing does not state how many covers are included

Manufacturer description

The SUNMON SoloCast 2 microphone pop filter is a foam windscreen made for the HyperX SoloCast 2. It also fits the original HyperX SoloCast. It is shaped for that capsule, so it slips over the mic head and stays put without clips or tape. That makes it a clean upgrade for a streaming, gaming or podcast desk. The cover is made from high-density, elastic foam. It softens the bursts of air from hard P and B sounds and cuts breath noise when you speak close to the mic, so your voice comes through cleaner on Discord, Twitch or a recording. It also keeps dust and saliva off the microphone grille…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SUNMON SoloCast 2 Microphone Pop Filter Windscreen, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Shaped for the HyperX SoloCast 2, and also fits the original SoloCast"; the main trade-off is "Arrives vacuum-packed and needs time to regain its shape". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this pop filter fit my original HyperX SoloCast, or only the SoloCast 2?

SUNMON says it is customized for the HyperX SoloCast 2 and also fits the original HyperX SoloCast. It is not listed as compatible with other microphone models.

Why does the foam cover look flat or squished when it arrives?

The windscreen ships vacuum-packed. SUNMON advises leaving it out for a while after unpacking so the high-density foam can return to its original shape before you fit it.

Will this foam windscreen block keyboard and background noise?

A foam windscreen mainly reduces plosives and breath noise from close-up speech. It does little against room echo or keyboard clicks, so use mic placement or software noise suppression for those.

Does the cover protect the microphone?

Yes. SUNMON states the cover keeps dust and saliva off the microphone, which helps protect the SoloCast's grille when the mic sits on your desk every day.

How does it stay on the microphone?

The windscreen is made of elastic, high-density foam that stretches over the SoloCast's head for a snug fit, so no clips, tape or mounting hardware are needed.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Professional customized HyperX SoloCast 2 microphone pop filter , perfectly adapted to SoloCast, also for HyperX SoloCast.
  • Microphone pop filter can filter the noise around you, improve the recording quality, and give you a better experience of using your microphone!
  • Microphone cover keeps the microphone free from dust and saliva.
  • Microphone Windscreen is made of high-density foam with good elasticity for a perfect fit.
  • Attention: Mic cover It is vacuum packed, when using, you can leave it for a while to let it recover its original state.

Full Specifications

BrandSUNMON
AttentionMic cover It is vacuum packed, when using, you can leave it for a while to let it recover its original state.
Color NameHyperX SoloCast Mic Cover
Material TypeFoam
Full listing titleSUNMON SoloCast 2 Microphone Pop Filter Windscreen - Noise Reduction Gaming Mic Foam Covers, Mic Foam Cover Pop Filter Compatible with HyperX SoloCast

Ready to buy?

SUNMON SoloCast 2 Microphone Pop Filter Windscreen - Noise Reduction Gaming Mic Foam Covers, Mic Foam Cover Pop Filter Compatible with HyperX SoloCast is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Streaming Gear

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →