4Pcs 8010 DC 5V Brushless 80MM Ball Bearing Cooling Fan for 3D Printer PC CPU Computer Case Fan Cooler - USB
Bottom line: The DORHEA 4Pcs 8010 DC 5V Brushless 80MM Ball Bearing Cooling Fan is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Confirm socket / form-factor / power-rating compatibility against your build before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Dimensions: 80x80x10mm /3.0 x 3.0 x 0.4inchVoltage: DC 5VCurrent: 0.13AmpPower: 1.5WattSpeed: 2200RPMAirflow: 15CFMNoise: 22dBAwire length: 25cm/9.84inch8010 fan wide application: Suitable for hot end cooling, 3D printers hotend, computer, humidifier or other cooling requirementsPackage include:4 x 8010 5V USB cooling fan
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for DORHEA 4Pcs 8010 DC 5V Brushless 80MM Ball Bearing Cooling Fan, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Dimensions: 80x80x10mm /3.0 x 3.0 x 0.4inch ; Voltage: DC 5V ; Current: 0.13Amp ; Power: 1.5Watt ; Speed: 2200RPM ; Airflow: 15CFM; Noise: 22dBA, wire length is 25cm.
- 5V 8010 fan is best for cooling the hottest and narrow spaces, circulating and exhausting stuffy air.
- Computer and peripherals, graphics card peripheral cooling, cooling base fan, designed for projects that requires cooling or ventilation or as an replacement fan for various products , allows the fans to be laid flat or stand upright.
- Blow warm air out of the case , draw cool air into your case, push the hot air out of your computer when mounted on the back or draw in fresh air if you mount it at the front of the case.
- 8010 fan wide application: Suitable for hot end cooling, 3D printers hotend, computer, humidifier or other cooling requirements.
Full Specifications
| Brand | DORHEA |
|---|---|
| Voltage | 5 volts |
| Wattage | 1.5 watts |
| Material | Copper |
| Dimensions | 80x80x10mm |
| Unit Count | 4 Count |
| Noise Level | 22 db |
| Part Number | DA11796-1 |
| Connectivity | USB |
| Compatibility | PC |
| Material Type | Copper |
| Cooling Method | Air |
| Number of Items | 4 |
| Air Flow Capacity | 15 cfm |
| Compatible Devices | Desktop, Printer |
| Power Connector Type | USB |
| Maximum Rotational Speed | 2200 rpm |
| 8010 fan wide application | Suitable for hot end cooling, 3D printers hotend, computer, humidifier or other cooling requirements. |
| Item Dimensions L x W x H | 3"L x 0.4"W x 3"H |
Benchmark data for other processors
Ready to buy?
4Pcs 8010 DC 5V Brushless 80MM Ball Bearing Cooling Fan for 3D Printer PC CPU Computer Case Fan Cooler - USB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 7 5800X vs 5800X3D for 1440p Gaming: Which Should You Buy?
- Old Massive Chieftec Full Tower: Homelab Gem or Junk?
- Best Budget Streaming Setup for Beginners in 2026
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- Dual RTX 3090 LLM Training: 2026 Benchmarks & Build Guide
- Ryzen 7 5800X + RTX 5060 Bundle Drops to $439 With a Free CPU Cooler
- Dell Precision 3660 vs Lenovo ThinkStation P3 Tower for Local LLMs (2026)
- Best $500-600 Gaming PC Build for a Ryzen/RX 6600 Rig
- Meta's AI Bill Hits Billions: The Case for Local Inference on a $300 GPU
- Best Gaming Monitors in 2026: 1080p, 1440p, and 4K Picks
- Why You Shouldn't Leave Model Selection on Default in Copilot, Gemini, and Other AI Tools
- 32B Models on 12GB VRAM: What an RTX 3060 Can Really Run in 2026
- Ollama vs llama.cpp on a 12GB GPU: Which Is Faster for Single-User Chat?
- Best GPU for Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- IPEX-LLM Ollama Update 2026: What's New for Intel GPU Rigs
- Started a Homelab a Month Ago: Am I Doing It Right?
- CompactFlash as a Win98 Boot Drive: Transcend CF133 + IDE Adapter Walkthrough
- Best Gaming Headsets for PS5 and PC in 2026
- Forza Horizon 6: Is 8GB VRAM Enough or Do You Need an RTX 3060 12GB?
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090