Wathai 60mm Brushless Cooling Fan 12V DC Dual Ball for DIY Ventilation 6020
Bottom line: Per its Amazon listing, the Wathai 60mm Brushless Cooling Fan 12V DC Dual Ball: 12V Fan: for broken fans in smart battery charger; 60mm Fan: Dimension: 60mm x 60mm x 20mm / 2.37x2.37x0.79 in.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 12V Fan: for broken fans in smart battery charger
- ✓ 60mm Fan: Dimension: 60mm x 60mm x 20mm / 2.37x2.37x0.79 in
- ✓ Backed by Wathai's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Wathai 60mm Brushless Cooling Fan 12V DC Dual Ball, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Wide Application: Good for installed as a replacement fan for 3D printer, as a vent fan for air circulation ,cool down pc CPU, inverter, amplifier, camper fridge, laptop, refrigerator, power supply
- 12V Fan: for broken fans in smart battery charger, psu, video card, network and storage devices, Can be used in 12v power supply in motorhome
- Easy to install: Came with everything needed to install it and also came very quickly. for ventilation in an off-grid living situation. for cooling an amp in a sub enclosure
- Dual Ball: Efficiently cools electronics with a long lifespan.of 50000h; for Pi Devices, 3D Printers, and Microelectronics; 1 Piece fan and mounting screws & nuts
- 60mm Fan: Dimension: 60mm x 60mm x 20mm / 2.37x2.37x0.79 in. per fan; Rated Voltage:12V 0.2A; Speed: 5000RPM; Air flow: 28CFM; Noise:36dBA;Connecter: XH2.54-2Pin; Cable Length: 20cm Or 7.8 inches
Full Specifications
| Brand | Wathai |
|---|---|
| 12V Fan | for broken fans in smart battery charger, psu, video card, network and storage devices, Can be used in 12v power supply in motorhome |
| Voltage | 12 volts_of_direct_current |
| Wattage | 1.5 watts |
| Material | Plastic |
| Dimensions | 2.37x2.37x0.79 in |
| Unit Count | 1 Count |
| Noise Level | 36 db |
| Part Number | 6020 12v 2p |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 28 cfm |
| Compatible Devices | Desktop |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 5000 rpm |
| Item Dimensions L x W x H | 2.36"L x 0.79"W x 2.36"H |
| Full listing title | Wathai 60mm Brushless Cooling Fan 12V DC Dual Ball for DIY Ventilation 6020 | 60mm DC 12V Fan for PSU 3D Printer Part Cooling |
Benchmark data for other processors
Ready to buy?
Wathai 60mm Brushless Cooling Fan 12V DC Dual Ball for DIY Ventilation 6020 | 60mm DC 12V Fan for PSU 3D Printer Part Cooling is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- AI-Driven Win98 Voodoo3 Driver Recovery on a Raspberry Pi 5 Companion
- GLM-5.2 Is Now the Most Intelligent Open-Weights Model — and the Most Verbose
- Building a 2001 Pentium III + GeForce 3 Win98SE Gaming Rig: A 2026 Build Log
- Why Preassembled PCs Beat DIY Builds in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Game Streaming in 2026
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- Jellyfin on Raspberry Pi 4 8GB with an SSD (2026 Guide)
- Sound Blaster vs Aureal Vortex 2: The Positional-Audio War Creative Won
- Microsoft Signals 32GB RAM as the Windows 11 Gaming Baseline
- Best Raspberry Pi Projects for College Students in 2026: 8 Builds on a Pi 4 8GB
- Best Wheel and Controller for Truck and Farm Sims in 2026
- ZOTAC RTX 3060 12GB vs Intel Arc B580 12GB for 1440p Gaming in 2026
- Did the Steam Deck Get a New Box Design? What Changed
- RTX 3060 12GB vs RX 7600 XT for Local LLMs: The Cheap Inference Card to Buy in 2026
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- Best Retro Gaming Gifts in 2026: 5 Picks for Console and PC Collectors
- Qwen3.6-27B at 72 Tok/s on RTX 3090: What's Real
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
- Best Streaming Gear for New Streamers in 2026: 5 Picks to Start On-Air
- Imaging Vintage IDE and SATA Drives in 2026: The Vantec CB-ISATAU2 Workflow
- SNES Classic vs Raspberry Pi 4 RetroPie: Which Retro Console Wins in 2026?
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- Best Sim Racing Wheel and Shifter for Beginners in 2026
- Razer Soma Chroma Gaming Chair Review: RGB vs. Adjustability
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090