Skip to main content
InnoGear Mic Arm Microphone Boom Arm Cable Management for Blue Yeti, Black | Desk Mount, for Shure Fifine, Professional Appearance, Extendable, Horizontal Reach 32.3", 3.5 lb Weight Capacity, Heavy-Duty
InnoGear

InnoGear Mic Arm Microphone Boom Arm Cable Management for Blue Yeti

Bottom line: The InnoGear Mic Arm Microphone Boom Arm Cable Management for Blue Yeti ($39.99 on Amazon as of 2026-10-21 12:20 UTC): Built-in cable channels with removable rubber covers hide USB and XLR runs; main trade-off: 3.5 lb ceiling rules out heavier broadcast mics and bulky shock mount combos.

$39.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $39.99 Compare to similar accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Built-in cable channels with removable rubber covers hide USB and XLR runs
  • ✓ 32.3 in horizontal and 37.4 in vertical reach clears most monitor setups
  • ✓ 3.5 lb spring-loaded capacity holds a Blue Yeti or Shure SM7B without drooping
  • ✓ 5/8 in metal connector fits Yeti, QuadCast, SM7B, MV7, AT2020, Fifine AM8

Cons

  • ✗ 3.5 lb ceiling rules out heavier broadcast mics and bulky shock mount combos
  • ✗ Desk clamp maxes out at 2 in thickness, so thick or glass desktops are out
  • ✗ No shock mount included, which Fifine K669B and similar mics need separately
  • ✗ Extension riser must be installed to hit the advertised 37.4 in vertical reach

Manufacturer description

The InnoGear Mic Arm solves the two problems most desk-mounted boom arms leave you with: dangling cables and a reach that stops short of your monitor. Built-in cable management channels run the length of the arm, so you pop off the rubber covers, tuck your USB or XLR cable inside, and snap them back for a clean on-camera look. The 14-inch arm sections plus the included 6.3-inch extension riser give you 32.3 inches of horizontal reach and 37.4 inches vertical, enough to swing over most monitors and land the mic where you actually want it. Thickened steel construction and internal springs…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored InnoGear Mic Arm Microphone Boom Arm Cable Management for Blue Yeti using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. InnoGear's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this hold a Blue Yeti without sagging?

Yes. The internal springs and thickened steel arm are rated to 3.5 pounds, and InnoGear specifically lists the Blue Yeti and Shure SM7B as supported mics that stay where you put them.

What is the actual reach of this boom arm?

The arm sections measure 14 inches and ship with a 6.3-inch extension riser, giving a maximum horizontal reach of 32.3 inches and a maximum vertical reach of 37.4 inches, enough to extend over most monitors.

Does it fit my desk?

The desk clamp fits any desktop up to 2 inches thick. Measure your desk edge first; anything thicker than 2 inches will not clamp securely.

How do the cable management channels work?

Each arm segment has a built-in channel covered by a removable rubber strip. Pull the covers off, lay your mic cable into the channel, and press the covers back on to keep the cable hidden and untangled.

Which microphones use the 5/8-inch connector on this arm?

InnoGear lists the Blue Yeti, HyperX QuadCast and SoloCast, Blue Snowball, Shure SM7B and MV7, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, Fifine K669B and Fifine AM8. A shock mount is not included.

Key Features

  • Cable Management Channels: The upgraded mic arms are optimized with built-in channels as cable management for you to put your cables in by simply removing the rubber cable covers, bringing a clean and neat look without getting your setups and cables tangled while recording or live streaming. The thoughtful design frees the whole look of being a mess and provides a shelter for cables.
  • Adjustable Angle & Smooth Movement: The boom arm is fully adjustable in 135° back and forth, and 180° up and down, easy to adjust in multiple directions silently. The base is 360° rotatable. This flexible arm stand allows you to determine which angle is the best for your recording needs.
  • Upgraded Length & Height: The length of the arm is increased to 14 inches and the package comes with a 6.3 inches extension riser for extra height. This mic stand has a max reach of 32.3 inches horizontally and 37.4 inches vertically to extend over most monitors. The desk clamp can clip to any desk up to 2 inches thick.
  • Built-in Springs & Strong Stability: Made of high-grade thickened steel, this sturdy microphone stand features strong internal springs for reaching a max load-bearing capacity of 3.5 pounds. It can easily handle the weight of heavy microphones like Yeti and SM7B, staying where you put it.
  • Universal Compatibility: The 5/8" metal connector is compatible with different kinds of microphones like Blue Yeti, Hyper X QuadCast, SoloCast, Blue Snowball, Shure SM7B, Shure MV7, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, Fifine K669B (Shock mount not included), Fifine AM8, etc. Perfect for studio, recording, podcasting, streaming, stage.

Full Specifications

BrandInnoGear
ColorBlack
Weight3.5 lb
MaterialAlloy Steel
Set NameInnoGear Mic Boom Arm Microphone Stand
Base TypeClamp
Model NameMU-PSA28
Unit Count1 Count
ConnectivityUSB
Model NumberMU-PSA28
Material TypeAlloy Steel
Product StyleStandard Clamp
Item Type Namemicrophone stand, mic stand, mic arm, boom arm stand
Maximum Height37.4 inches
Item Dimensions15.75 x 1.57 x 13.78 inches
Body Material TypeAlloy Steel
Included ComponentsMic Arm Stand, Extension Riser, Rubber Cable Covers, Table Mounting Clamp
Warranty Description12 months.
Manufacturer Part NumberMU-PSA28
Item dimensions L x W x H15.75 x 1.57 x 13.78 inches
Full listing titleInnoGear Mic Arm Microphone Boom Arm Cable Management for Blue Yeti, Black | Desk Mount, for Shure Fifine, Professional Appearance, Extendable, Horizontal Reach 32.3", 3.5 lb Weight Capacity, Heavy-Duty

Ready to buy?

InnoGear Mic Arm Microphone Boom Arm Cable Management for Blue Yeti, Black | Desk Mount, for Shure Fifine, Professional Appearance, Extendable, Horizontal Reach 32.3", 3.5 lb Weight Capacity, Heavy-Duty is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $39.99

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Related Accessories

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
InnoGear Mic Arm Microphone Boom Arm Cable Management for Blue Yeti, Black | Desk Mount, for Shure Fifine, Professional Appearance, Extendable, Horizontal Reach 32.3", 3.5 lb Weight Capacity, Heavy-Duty
$39.99
View on Amazon →