MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra Low Loss for Antenna
Bottom line: The MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra: RG8X coax rated -2.65dB loss at 25ft/1800MHz with VSWR under 1.15; main trade-off: only 3FT long, too short for antenna mast to shack runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ RG8X coax rated -2.65dB loss at 25ft/1800MHz with VSWR under 1.15
- ✓ Pure copper inner conductor with 95% tinned copper braid shielding
- ✓ BNC male to BNC female keeps 50 ohm impedance for RF test gear
- ✓ 2.2 inch adhesive tube anchors connectors against pull-off
- ✓ Waterproof PVC jacket rated for long-term outdoor runs
Cons
- ✗ Only 3FT long, too short for antenna mast to shack runs
- ✗ 50 ohm impedance mismatches 75 ohm video and CCTV BNC gear
- ✗ Male-to-female wiring makes it an extension, not a device jumper
- ✗ Modest 149-review sample for a connectivity part
SpecPicks Verdict
SpecPicks scored MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra… using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. MOOKEERF's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- [Specification]-Connector: BNC male to BNC female, impedance: 50 ohm, Cable type: RG8X.
- [Ultra Low Loss]-The RG8X jumper cable got a professional structure and take good advantage in transmit data with lower signal attenuation that low to -2.65db(25ft,1800MHz) and keep VSWR≤1.15.
- [Firm Connected]-We fix the connector with 2.2" adhesive tube and it will not easy to fall off from the cable. And that can provide a heavy duty and firmly connection, really durable and professional coaxial cable.
- [High Grade Material]-This RG8X BNC cable inner conductor is made by pure copper and build with 95% tinned copper braid, that can make sure the signal transmission efficiently and stable. The PVC jacket is waterproof and has strong oxidation resistance, and can be adapted to outdoor for a long time.
- [Widely Application]-Compatible with device which contain BNC connector, including splitter, 3G/4G/LTE antenna, Oscilloscope, Spectrum, Analyzer and Network systems etc.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | MOOKEERF |
| Weight | 3g |
| Frequency | 2000000000 Hz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 3.0 Feet |
| Part Number | RG8X-BNC-JK |
| Connector Type | BNC |
| Number of Pins | 2 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Female |
| Compatible Devices | Antenna |
| Data Transfer Rate | 3 Gigabits Per Second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Warranty Description | 30 Days From the Date of Purchased |
| [Specification]-Connector | BNC male to BNC female, impedance: 50 ohm, Cable type: RG8X. |
| Full listing title | MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator (3FT) |
Ready to buy?
MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator (3FT) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming Mouse for FPS Esports Under $100 (2026)
- Aider vs Cline vs Continue.dev for Local Coding on an RTX 3060 (2026)
- Gemma 4 31B Abliterated on a Single RTX 3060 12GB: Quantization, VRAM, and Real Tok/s
- Best CPU Cooler for AM4 Ryzen 5800X & 9700K Builds (2026)
- Lemonade v10.5.1: an MTP + ROCm 7.13 quick start for Strix Halo
- Best Controllers for Retro Gaming and Emulation in 2026
- How to run Llama 3.1 70B on Arc B580
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Host a Quake 3 + UT99 LAN Server on a Raspberry Pi 4 in 2026
- Open-WebUI vs LM Studio: Best Local LLM Front-End in 2026
- Best CPU Cooler for a Ryzen Build in 2026 (Air & AIO)
- Claude Opus 4.8 Tops GPT-5.5: What Runs Local on a 12GB GPU
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- Ryzen 9 3900X vs Ryzen 5 5600G for CPU-Only Local LLM Inference (2026)
- Best SATA SSDs for Gaming and Retro PC Builds in 2026
- How to Host a Quake 3 Arena Server in 2026: Modern Setup for Classic LAN Play
- Best Arcade Fight Stick & Controller for PlayStation Fighting Games (2026)
- Best AMD CPUs for Gaming in 2026: Top Ryzen Picks
- Intelligence Index v4.1: The Agentic-Benchmark Shift and Your Local Rig
- ComfyUI on a 12GB RTX 3060: SDXL and Flux Image Gen Benchmarked
- How to run Qwen 3 14B on Arc B580
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- The $5M Sega Bet That Saved Nvidia — and Still Shapes GPU Launches
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090