Skip to main content
iCESugar-Pro FPGA Development-Board Lattice ECP5 FPGA RISC-V Linux SODIMM Module (FPGA board)
MiiElAOD

iCESugar-Pro FPGA Development-Board Lattice ECP5 FPGA RISC-V Linux SODIMM Module (FPGA board)

Bottom line: The iCESugar-Pro FPGA Development-Board Lattice ECP5 FPGA RISC-V Linux is a specs-and-price decision rather than a crowd-consensus one in the emulation hardware category, priced around $66.99 on Amazon as of 2026-11-20 21:15 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

$66.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For emulation handhelds, FPGA consoles and flash carts, synthesises manufacturer documentation, community compatibility lists and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Package: 1pc * iCESugar-Pro
  • ✓ Backed by MiiElAOD's warranty and support channels

Cons

  • ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

Product introductioniCESugar-Pro is a FPGA development board based on Lattice LFE5U-25F-6BG256C , which is fully supported by the open source toolchain (yosys & nextpnr). This board is designed in DDR SODIMM form with 106 usable IOs and on-board 32MB SDRAM. It can run RISC-v Linux. The on board debugger iCELink (base on ARM Mbed DAPLink) supports drag-and-drop programming. You can just drag the FPGA bitstream into the virtual disk to program. And with a additional USB CDC serial port direct connect to FPGA, you can only use one TYPE-C cable to develop and test.Features-Lattice…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for iCESugar-Pro FPGA Development-Board Lattice ECP5 FPGA RISC-V Linux…, so this read rests on the manufacturer's listed specs and the current price in the emulation hardware category (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Package: 1pc * iCESugar-Pro

Full Specifications

BrandMiiElAOD
Package1pc * iCESugar-Pro
Model NameiCESugar-Pro
Unit Count1.0 Count
CompatibilityLinux
Built-In MediaiCESugar-Pro
Processor Count1
Total Usb Ports1
Compatible DevicesComputers (PCs, laptops, tablets)
RAM Memory Installed32 MB
Warranty Description180 days
Wireless Compability802.11b
RAM Memory TechnologyDDR
Connectivity TechnologyI2C
Memory Storage Capacity32 MB
Smart Home CompatibilityNot Smart Home Compatible
Ram Memory Installed Size32 MB

Ready to buy?

iCESugar-Pro FPGA Development-Board Lattice ECP5 FPGA RISC-V Linux SODIMM Module (FPGA board) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $66.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Emulation Hardware

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →