Skip to main content
GeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4, with Fan and Heatsinks, 320x480 Resolution TFT LCD Display for Raspberry Pi 4 Model B (Pi Board NOT Included)
GeeekPi

GeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4

Bottom line: The GeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4 ($26.99 on Amazon as of 2026-10-06): 320x480 TFT resistive touch, plugs into any Raspberry Pi via GPIO; main trade-off: pi board NOT included, budget for it separately.

$26.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $26.99 Compare to similar emulation hardware

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For emulation handhelds, FPGA consoles and flash carts, synthesises manufacturer documentation, community compatibility lists and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 320x480 TFT resistive touch, plugs into any Raspberry Pi via GPIO
  • ✓ ~50fps at 125MHz SPI, stable enough for retro games and video
  • ✓ Complete kit: ABS case, 30mm fan, aluminum heatsinks, touch pen
  • ✓ Free drivers and images for Raspbian, Ubuntu, and Kali

Cons

  • ✗ Pi board NOT included, budget for it separately
  • ✗ ABS case fits only Raspberry Pi 4B, not older boards
  • ✗ Resistive panel needs the stylus, less responsive than capacitive
  • ✗ Small 3.5in 320x480 area cramps desktop UI, best for kiosk or emulation

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored GeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4 using a rating × review-volume × price-fit model applied to published specs and reviews across the emulation hardware category. GeeekPi's emulation hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for emulation hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Pi Board NOT Included! NOTE: There will be a protective film on the screen surface. Please remove it before use.
  • The 3.5 inch resistive touch screen can be directly inserted into any version of the Pi boards, but the ABS case is only compatible with Raspberry Pi 4B; The resolution of 3.5 inch touch screen can be adjusted by software; The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker; It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely.
  • Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan

Full Specifications

BrandGeeekPi
ColorBlack
Shapeirregular shape
Voltage5 volts
Dimensions30x30x7mm
Model Name3.5 Inch Resistance Touch Screen
Resolution320 x 480
Unit Count1 Count
Pixel Pitch0.04
Screen Size3.5 inches
Aspect Ratio1.66:1
Display TypeLCD
Model Number7e71d25d-aeb0-46a4-ae05-c32f6b53c437
Refresh Rate50 hertz
Screen FinishGlossy
Viewing Angle170 degrees
Contrast Ratio2000:1
Processor Count1
Total Usb Ports4
Package includes1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan
Full listing titleGeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4, with Fan and Heatsinks, 320x480 Resolution TFT LCD Display for Raspberry Pi 4 Model B (Pi Board NOT Included)

Ready to buy?

GeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4, with Fan and Heatsinks, 320x480 Resolution TFT LCD Display for Raspberry Pi 4 Model B (Pi Board NOT Included) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $26.99

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Emulation Hardware

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
GeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4, with Fan and Heatsinks, 320x480 Resolution TFT LCD Display for Raspberry Pi 4 Model B (Pi Board NOT Included)
$26.99
View on Amazon →