Skip to main content
JRready ST5265 Molex Pin Extractor Tool for Molex .062" & .093” Pin and Socket Connectors, 2PCS Tube Type Ejector Rod Insertion Tools
JRready

JRready ST5265 Molex Pin Extractor Tool for Molex .062" & .093” Pin and Socket Connectors

Bottom line: The JRready ST5265 Molex Pin Extractor Tool ($38.99 on Amazon as of 2026-11-20 11:18 UTC): Two tube sizes cover both Molex .062" and .093" contacts in one 2-piece kit; main trade-off: only two sizes, so Molex .084 and non-listed pitches need a separate extractor.

$38.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Two tube sizes cover both Molex .062" and .093" contacts in one 2-piece kit
  • ✓ Hardened alloy steel needle heads resist bending on stubborn AT and Molex terminals
  • ✓ Chamfered needle tip slides into terminal holes without gouging the connector body
  • ✓ Push-rod ejector frees pins with light pressure instead of prying at the housing
  • ✓ Fits AMP .062, Molex 5500/5600 3.68mm pitch, 1545, 3191, 1991 and JST contacts

Cons

  • ✗ Only two sizes, so Molex .084 and non-listed pitches need a separate extractor
  • ✗ Tube extractors demand correct sizing; the 2.2mm ID will not seat on .093 pins
  • ✗ No case or pouch listed, so the thin rods are easy to misplace in a toolbox
  • ✗ Handles male and female contacts only, not sealed or weatherpack automotive plugs

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for JRready ST5265 Molex Pin Extractor Tool, so this read rests on the manufacturer's listed specs and the current price in the power supplies & cables category (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Two tube sizes cover both Molex .062" and .093" contacts in one 2-piece kit"; the main trade-off is "Only two sizes, so Molex .084 and non-listed pitches need a separate extractor". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【Terminal Pin Extraction Tools】Includes two kits with different sizes: DAP-T220260 (ID: 2.2mm/0.086", OD: 2.6mm/0.102") and DAP-T320360 (ID: 3.2mm/0.125", OD: 3.6mm/0.414").
  • 【Wide Compatibility】DAP-T220260 suitable for AMP .062"/ MOLEX .062" /Molex 3.68Pitch(5500 5600) /JST Series Male&Female Contact. DAP-T320360 suitable for MOLEX .093"/1545/3191/1991/JST Series Male&Female Contact.
  • 【Smooth Insertion】Combined with an internally chamfered needle head design, made from hardened alloy steel, this tool enables smooth and seamless insertion into connector terminal holes for reliable connections.
  • 【Sophisticated Push Rod Design】Featuring a push rod mechanism, these extraction tools make it easier to remove terminals with minimal effort.Enhanced version Pin Extraction tool is tailored for discerning customers seeking a premium and effortless experience, offering precise and efficient terminal removal.
  • 【Stylish and Ergonomic Design】With a captivating camouflage blue color hexagonal handle design, this product not only stands out with its attractive appearance but also offers a comfortable. Perfect for pros and DIYers, adding flair to projects.

Full Specifications

BrandJRready
Color‎Molex .062" & .093” Pin Extractor Tool
Pattern‎2PCS
Material‎alloy_steel
Part Number‎ST5265
Package Dimensions‎7.72 x 1.89 x 0.67 inches
Included Components‎DAP-T220260+DAP-T320360
Item Package Quantity‎1
Full listing titleJRready ST5265 Molex Pin Extractor Tool for Molex .062" & .093” Pin and Socket Connectors, 2PCS Tube Type Ejector Rod Insertion Tools

Ready to buy?

JRready ST5265 Molex Pin Extractor Tool for Molex .062" & .093” Pin and Socket Connectors, 2PCS Tube Type Ejector Rod Insertion Tools is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $38.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →