Thermalright
Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans
Bottom line: The Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans ($11.59 on Amazon as of 2026-10-21 12:20 UTC): 8 ports for 4-pin PWM fans plus 5V 3-pin ARGB fans and light strips; main trade-off: no built-in speed or lighting control; needs motherboard PWM and ARGB headers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 8 ports for 4-pin PWM fans plus 5V 3-pin ARGB fans and light strips
- ✓ SATA power input keeps fan and LED load off motherboard headers
- ✓ Relays motherboard PWM speed and ARGB sync signals to all connected devices
- ✓ Double-sided adhesive plus magnetic backing for tool-free case mounting
- ✓ Compact body consolidates fan and lighting cables behind the motherboard tray
Cons
- ✗ No built-in speed or lighting control; needs motherboard PWM and ARGB headers
- ✗ Only the fan on the red port reports RPM to the motherboard
- ✗ Not compatible with 12V 4-pin RGB devices; wrong plug can cause damage
- ✗ All connected fans follow one shared speed curve, not per-fan tuning
Manufacturer description
The Thermalright ARGB Fan HUB gives you 8 ports for fans and lighting from a single hub. That helps in cases where the motherboard runs out of fan and ARGB headers before you run out of fans. Each port handles a 4-pin PWM fan and 5V 3-pin ARGB devices, including ARGB fans and light strips. Wiring is tidier, and the lighting effects stay synced across everything you connect. Power comes directly from a SATA cable, so the combined draw of your fans and LEDs doesn't load a single motherboard header. The hub mounts without tools. Stick it down with the built-in double-sided adhesive or attach it…
SpecPicks Verdict
SpecPicks scored Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. Thermalright's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this Thermalright hub work with 12V 4-pin RGB fans or strips?
No. It supports only 5V 3-pin ARGB devices. Thermalright warns against plugging 12V 4-pin RGB devices into it, and inserting an ARGB plug the wrong way can damage the device. Line up the arrow on the plug with the 5V pin.
Can I control fan speed or lighting effects with the hub itself?
No. The hub only adds fan and lighting ports. It has no controller or buttons. Your motherboard's PWM fan header sets fan speed and its 5V ARGB header sets the effects, and the hub passes both signals to all 8 ports.
Why does my motherboard show the speed of only one fan?
Because of how motherboard PWM headers read speed, only the fan plugged into the red port reports its RPM. The other fans still receive the PWM signal and follow the same speed curve.
How is the hub powered and mounted?
It draws power through a SATA power cable from your PSU. You can mount it with the built-in double-sided adhesive or by magnet on a steel case panel. Behind the motherboard tray is a common spot.
How many fans and ARGB devices can I connect?
The hub supports 8 groups of devices. Each port accepts a 4-pin PWM fan and a 5V 3-pin ARGB device such as an ARGB fan or light strip. Check your fans' current draw against your PSU's SATA rail before connecting a full set.
Key Features
- Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R & D product lines include: CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
- This fan hub supports the installation of 8 groups of ARGB fans, making it easy to manage wiring. Strong paste installation mode, convenient SATA power line direct transmission, and safety is guaranteed.
- Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.
- Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
- Small body, large capacity. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.)
- Attention: This product only serves to expand the fan interface and lighting interface, and does not have the function of controlling speed and adjusting lighting.
Full Specifications
| Brand | Thermalright |
|---|---|
| Color | ARGB FAN HUB 8 ports |
| Voltage | 12 volts |
| Material | Silicone |
| Compatibility | PC |
| Full listing title | Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Hub, Strong Paste+Magnetic Suction, SATA Power Cord(12V 4-pin RGB is not Supported) |
Ready to buy?
Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Hub, Strong Paste+Magnetic Suction, SATA Power Cord(12V 4-pin RGB is not Supported) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Intel Core Ultra 5 250K Plus Takes On the Ryzen 5 7600X3D for Mid-Range Gaming
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Game Streaming in 2026
- This DIY 'Steam Controller Puck' Emulates Xbox, Switch & PS Pads
- Best SATA SSD for a Retro Windows XP or 98 Build (2026)
- Best Streaming Gear for Twitch Beginners in 2026
- AMD Ryzen AI Max+ 395: The 128GB Mini PC Running 70B LLMs Locally
- 8BitDo Pro 2 vs GameSir G7 SE: Best PC Emulation Controller
- Build a Raspberry Pi Retro Handheld in 2026: Parts and Setup
- Build a Raspberry Pi Retro Handheld with the 8BitDo SN30 Pro
- Stream Deck MK.2 vs 12-Button MMO Mouse vs Macro Keys: Which Shortcut Buttons Are Worth It
- Best Parts for a Multi-User Local LLM Server in 2026
- Best Game Controllers for PC and Console (2026)
- Build a 2001 GeForce3 + Win98 SE Gaming Rig in 2026: Parts and Gotchas
- LG UltraGear 52G930B 52-Inch 5K Gaming Monitor Review
- Blue Yeti vs HyperX QuadCast 2: Best Budget Streaming Mic Setup in 2026
- ComfyUI on an RTX 3060 12GB: Real Image-Gen Throughput in 2026
- Can Local Qwen 3.6 Match Frontier Models at Canvas Code?
- DeepSeek V4 Pro at $0.04 a Task: When Local Still Beats the Cloud
- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- Best SATA SSD for a PS4 Upgrade in 2026: BX500 vs 870 EVO vs WD Blue
- The $5M Sega Bet That Saved Nvidia — and Still Shapes GPU Launches
- Steam Deck on 100+ Inch Screens: Big-Screen Setup Guide
- Build a Live ADS-B Flight Tracker on a Raspberry Pi 4 in 2026
- AI Bug-Hunting Surged: Running a Local Security-Scanner LLM on 12GB VRAM
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090