Skip to main content
FiiO/JadeAudio KA13 Portable DAC Dongle, USB-C Adapter, 3.5mm and 4.4mm Outputs Compatible with Android/iOS System/PC/Music Players, PCM 384kHz/32bit | DSD256 550mW high Power (Black)
FiiO

FiiO/JadeAudio KA13 Portable DAC Dongle

Bottom line: The FiiO/JadeAudio KA13 Portable DAC Dongle ($65.99 on Amazon as of 2026-11-21 01:15 UTC): Up to 550mW balanced output in Desktop mode for high-impedance headphones; main trade-off: full 550mW figure applies only to balanced output in Desktop mode.

$65.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Up to 550mW balanced output in Desktop mode for high-impedance headphones
  • ✓ Dual CS43131 DACs paired with dual low-noise SGM8262 op-amps
  • ✓ Both 3.5mm single-ended and 4.4mm balanced outputs in one dongle
  • ✓ Plays PCM up to 384kHz/32bit and native DSD256
  • ✓ FiiO Control app adjusts filters, SPDIF output and RGB lighting

Cons

  • ✗ Full 550mW figure applies only to balanced output in Desktop mode
  • ✗ Power output for the 3.5mm jack is not specified in the listing
  • ✗ Filter, SPDIF and lighting changes require the companion app
  • ✗ No built-in battery; it draws power from the host device's USB-C port

Manufacturer description

The FiiO KA13 is a pocket-sized USB-C DAC dongle that puts desktop-class headphone power on your phone, laptop or music player. Plug it in and you get two headphone outputs on one compact body: a 3.5mm single-ended jack and a 4.4mm balanced jack. You no longer have to choose between your everyday earbuds and your balanced-cable headphones. Inside, the FiiO KA13 uses two CS43131 DAC chips and two low-noise SGM8262 op-amps. That dual-chip layout handles PCM up to 384kHz/32bit and native DSD256, so your hi-res library plays at full resolution instead of being downsampled by your phone's…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for FiiO/JadeAudio KA13 Portable DAC Dongle, so this read rests on the manufacturer's listed specs and the current price in the audio & midi category (how we evaluate). Compare with similarly-priced alternatives in the audio & midi category before committing. On the listing's own facts, the case for it is "Up to 550mW balanced output in Desktop mode for high-impedance headphones"; the main trade-off is "Full 550mW figure applies only to balanced output in Desktop mode". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can the FiiO KA13 drive high-impedance headphones?

Yes. In Desktop mode the 4.4mm balanced output goes up to 550mW, which FiiO says can drive both low- and high-impedance headphones. For the most demanding headphones, use the balanced 4.4mm jack with Desktop mode enabled.

What audio resolution does the KA13 support?

It decodes PCM up to 384kHz/32bit and native DSD up to DSD256, using two CS43131 DAC chips and two SGM8262 op-amps.

Does the KA13 work with iPhone and Android phones?

The KA13 is listed as compatible with Android, iOS, PC and music players, and it connects over USB-C. If your device does not have a USB-C port, check the product listing for the cables or adapters you need.

What is the difference between the 3.5mm and 4.4mm outputs?

The 3.5mm jack is a standard single-ended output for most earbuds and headphones. The 4.4mm jack is a balanced output for headphones with 4.4mm balanced cables, and it is the output rated up to 550mW in Desktop mode.

What can I control with the FiiO Control app?

The FiiO Control app lets you set the RGB lights, turn on SPDIF output and choose between audio filters. The dongle plays audio without the app, but you need the app to change these settings.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • [Mini desktop amp, 550mW high power] Supports “Desktop mode”, under which the balanced output power goes up to 550mW, allowing it to drive both low and high-impedance headphones with excellent dynamics and detail.
  • [Dual CS43131 DACs, dual 8262 op-amps] Features two high-performance yet highly efficient CS43131 DAC chips and two low-noise SGM8262 op-amps. This truly “dual-core” golden combo brings excellent performance.
  • [PCM 384kHz/32bit, DSD256] Supports 32bit/384kHz PCM despite its tiny size, it is capable of highly-detailed sound.
  • [3.5+4.4 dual outputs] After repeatedly adjusted design, it finally managed to fit two headphone outputs in the compact dongle, marking true progress in packaging capabilities.
  • [App connectivity] Supports being controlled with the FIIO Control app. With the app, you can set the RGB lights, SPDIF output, audio filters, etc. for a more convenient experience.

Full Specifications

BrandFiiO
ModelKA13
MaterialAluminum
InterfaceUSB
Unit Count1 Count
Part NumberKA13
ConnectivityUSB-C
CompatibilityPC, Android, iOS
Material TypeAluminum
Interface TypeUSB
Number of Pins8
Number of Items1
Audio Output ModeStereo
Compatible DevicesHeadphones, PC, Smartphone
Number of Channels2
Included ComponentsNo
Full listing titleFiiO/JadeAudio KA13 Portable DAC Dongle, USB-C Adapter, 3.5mm and 4.4mm Outputs Compatible with Android/iOS System/PC/Music Players, PCM 384kHz/32bit | DSD256 550mW high Power (Black)

Ready to buy?

FiiO/JadeAudio KA13 Portable DAC Dongle, USB-C Adapter, 3.5mm and 4.4mm Outputs Compatible with Android/iOS System/PC/Music Players, PCM 384kHz/32bit | DSD256 550mW high Power (Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $65.99

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Audio & MIDI

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →