CableMod E-Series Pro ModMesh Sleeved 12VHPWR StealthSense PCI-e Cable
Bottom line: The CableMod E-Series Pro ModMesh Sleeved 12VHPWR StealthSense PCI-e Cable ($24.90 on Amazon as of 2026-11-22 02:13 UTC): Direct 16-pin to triple 8-pin fit for EVGA G7/G6/G5/G3/G2/P2/T2 PSUs; main trade-off: EVGA G/G+/P/P+/T pinout only, not cross-brand compatible.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Direct 16-pin to triple 8-pin fit for EVGA G7/G6/G5/G3/G2/P2/T2 PSUs
- ✓ StealthSense 12VHPWR terminal senses connector seating
- ✓ Ships with a cable shroud that hides the 12VHPWR bend
- ✓ Closed cable combs pre-installed, so no manual comb routing
Cons
- ✗ EVGA G/G+/P/P+/T pinout only, not cross-brand compatible
- ✗ 60cm may be short for full-tower or bottom-mount PSU builds
- ✗ Triple 8-pin source means three PSU ports occupied
- ✗ White ModMesh shows dust and cable-comb scuffs
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CableMod E-Series Pro ModMesh Sleeved 12VHPWR StealthSense PCI-e Cable, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Direct 16-pin to triple 8-pin fit for EVGA G7/G6/G5/G3/G2/P2/T2 PSUs"; the main trade-off is "EVGA G/G+/P/P+/T pinout only, not cross-brand compatible". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Made for EVGA G7 / G6 / G5 / G3 / G2 / P2 / T2 PSUs
- 16-pin to 3 x 8-pin PCI-e Cable
- All-New Cable Shroud Included
- Pre-Installed Closed Cable Combs
- Vibrant ModMesh Sleeving
Full Specifications
| Brand | CableMod |
|---|---|
| Color | White |
| Model | CM-PEV2-16P3-N60KW-5PW-R-SS |
| Cable Type | Component |
| Item Shape | Round |
| Model Name | CM-PEV2-16P3-N60KW-5PW-R-SS |
| Unit Count | 1 Count |
| Item Length | 23.62 inches |
| Part Number | CM-PEV2-16P3-N60KW-5PW-R-SS |
| Connector Type | 8 Pin PCIe |
| Number of Pins | 16 |
| Outer Material | ModMesh |
| Maximum Voltage | 88.9 volts |
| Number of Items | 1 |
| Special Feature | Braided |
| Connector Gender | Male-to-Male |
| Specification Met | RoHS |
| Compatible Devices | EVGA G7 / G6 / G5 / G3 / G2 / P2 / T2 PSUs |
| Data Transfer Rate | 12 gigabits_per_second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Full listing title | CableMod E-Series Pro ModMesh Sleeved 12VHPWR StealthSense PCI-e Cable for EVGA G/G+ / P/P+ / T (White, 16-pin to Triple 8-pin, 60cm) |
Ready to buy?
CableMod E-Series Pro ModMesh Sleeved 12VHPWR StealthSense PCI-e Cable for EVGA G/G+ / P/P+ / T (White, 16-pin to Triple 8-pin, 60cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 4 8GB as a 2026 Home Server: What Actually Runs Well
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- Best Local LLM You Can Run on 12GB of VRAM in 2026
- Local LLM as a Quake 3 / UT99 Demo Coach: Ollama on Ryzen 7 5800X + RTX 3060 (2026)
- Single vs. Dual Channel Memory: Intel Core Ultra 7 270K
- RTX 3060 12GB for 1080p 240Hz Esports: CS2, Valorant, Apex
- Ryzen AI Max 385 Mini PC: Specs and What It's Really For
- OpenAI Names Its Biggest Data Center Yet, With NVIDIA Backing: What It Means
- Raspberry Pi 5 Secondary Monitor Setup Guide (2025)
- Building a Period-Correct 2001 GeForce 3 Windows 98 SE Rig — With a CompactFlash Boot Drive
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- Best AM4 CPU Cooler in 2026: 5 Picks for Ryzen Builds
- Black Friday Retro Handheld Deals: 5 Picks From Miyoo to Retroid
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
- Qwen 3.6 27B on 16GB: RTX 5060 Ti 16GB vs RX 9060 XT 16GB by Quant (2026)
- Ollama on Intel + AMD via IPEX-LLM: Docker Compose Guide
- Jellyfin vs Plex on a Raspberry Pi 4 (8GB) in 2026: Transcoding, Power Draw, and Which to Self-Host
- Best Storage for a Raspberry Pi 4 Home Server: microSD vs SATA SSD vs NVMe
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- Voodoo5 5500 AGP Won't POST: Complete Troubleshooting Guide for 2026 Restorations
- Qwen-Image-3.0 on an RTX 3060 12GB: Local Text-in-Image Gen
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090