airgoo Addressable RGB GPU Strimer
Bottom line: The airgoo Addressable RGB GPU Strimer: 126 individually addressable LEDs across the 24-pin run, denser than typical 5V strimers; main trade-off: 126 LEDs exceeds the 120-LED cap on most motherboard 3-pin headers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 126 individually addressable LEDs across the 24-pin run, denser than typical 5V strimers
- ✓ White high-diffusion silicone tube softens hotspots into an even glow
- ✓ 18AWG double-layer wiring, electrical-tested for stable PSU delivery
- ✓ Standard 3-pin ARGB (+5V, DATA, GND) plugs into most motherboard headers
Cons
- ✗ 126 LEDs exceeds the 120-LED cap on most motherboard 3-pin headers
- ✗ Full control needs an AG-DRGB16 or Corsair Commander Core XT, sold separately
- ✗ Silicone tube attracts dust and shows it against the white finish
- ✗ +5V only, so a 12V RGB header will not run it and may damage it
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for airgoo Addressable RGB GPU Strimer, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "126 individually addressable LEDs across the 24-pin run, denser than typical 5V strimers"; the main trade-off is "126 LEDs exceeds the 120-LED cap on most motherboard 3-pin headers". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- ✅ IMPORTANT: This Strimer has 108 LEDs total. Currently, the 3-pin argb header on some motherboards can only support up to 100 LEDs. For a better uer experience, it is recommended to use it with Corsair Commander Core XT or Airgoo 16-port SignalRGB controller AG-DRGB16, controller needs to be purchased separately.
- ✅ One Addressable RGB Power Extension Cable: Each cable come with white silicon rubber tube, overall dimension is 10.24 x 1.34 x 0.32 inches. Using environmentally friendly silicon rubber, no smell, soft, flexible, light diffusing helpful, but easily coated with dust, please note it.
- ✅ Using built-in ic led lamp beads: Total 108 leds, control with argb 3-pin connector (+5V, DATA, GND), each led lamp bead can be individually controlled via specialized Airgoo AG-DRGB16 Signal RGB controller or motherboard's argb 3-pin header. Working voltage is +5V, cannot use other voltages for power supply, please note it.
- ✅ Perfectly works with AG-DRGB16 Controller: Recommend to purchase our AG-DRGB16 Controller (Not Included) separately, compatible with SignalRGB, 16-Port independent channel for complex layered lighting setups, eliminating motherboard header limits and unifying multi-brand lighting setups effortlessly.
- ✅ Certified Safety: The Power Cable has Double-layer design with 18AWG wire, pass electrical test, maintain the stability of the power supply.
- ✅ PACKAGE INCLUDES: 1 x Addressable RGB Dual 8-Pin Power Extension Cable.
Full Specifications
| Brand | airgoo |
|---|---|
| Color | ARGB GPU Dual 8Pin |
| Model | AG-GPUS-D8P |
| Wattage | 10 watts |
| Cable Type | Display Port |
| Dimensions | 10.24 x 1.34 x 0.32 inch |
| Item Shape | Flat |
| Model Name | Airgoo GPU Dual 8-pin Strimer |
| Unit Count | 1 Count |
| Item Length | 10.24 inches |
| Part Number | AG-GPUS-D8P |
| Connector Type | 8 Pin PCIe |
| Number of Pins | 16 |
| Maximum Voltage | 5 volts |
| Number of Items | 1 |
| Special Feature | LED Display |
| Connector Gender | Male-to-Female |
| Compatible Devices | Laptop |
| Included Components | Addressable RGB Dual 8-Pin Power Extension Cable |
| Indoor Outdoor Usage | Indoor |
| Full listing title | airgoo Addressable RGB GPU Strimer, ARGB GPU 8-Pin Power Extension Cable | 108 High-Density LEDs with High-Diffusion Silicone Tube, 18AWG Wires and 2x8-pin PCIe Connectors for RTX 30 series |
Ready to buy?
airgoo Addressable RGB GPU Strimer, ARGB GPU 8-Pin Power Extension Cable | 108 High-Density LEDs with High-Diffusion Silicone Tube, 18AWG Wires and 2x8-pin PCIe Connectors for RTX 30 series is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Anker's Thus Chip Claims 150x AI Boost: No Benchmarks Yet
- Best Cooler for the Ryzen 7 5800X: Noctua vs DeepCool vs CoolerMaster
- Ryzen CPU Deals 2026: 5600X, 5800X3D and 9800X3D Price Lines
- GLM-5.2 on 12GB VRAM: Quantization and Speed on the RTX 3060
- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- Ryzen 5 5600X vs Ryzen 7 5800X: CPU-Only Qwen2.5 14B (2026)
- Tesla Capped AI Spend at $200/Week — Build a Local Inference Box for Less
- Noctua NH-U12S vs DeepCool AK620 for Ryzen Overclocking: Air-Cooler Showdown
- Gemini-Class Models on Local Hardware: How Much VRAM You Actually Need
- Best Controller for Retro Emulation and Indie Gaming in 2026
- Play Retro Games in Your Browser: Best Emulators 2025
- AI Bug-Hunting Exploded: Run a Local Vuln-Scanner LLM on 12GB VRAM
- Framework Desktop & Ryzen AI Max+ 395 Review: Best Strix Halo Mini PCs in 2026
- Raspberry Pi AI Projects: A 2025 Builder's Guide
- The Adder at the Heart of Intel's 8087 Math Coprocessor
- RetroPie Handheld Build Guide 2026: Hardware & Setup
- Best Raspberry Pi Starter Kits for Beginners (2026)
- Best CPU Cooler for the Ryzen 7 5800X in 2026
- Does Dual-Channel RAM Matter for Local LLM Inference?
- Best PC Gaming Controller 2026: GameSir G7 SE vs 8BitDo Pro 2 vs Sony DualSense
- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Running Qwen3.5/3.6 with NextN MTP on an RTX 3090 Ti
- Cooling a 24/7 Local LLM Rig: Air vs 120mm AIO vs 240mm AIO
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090