BONTEC

BONTEC Dual Monitor Stand for 13-32 Inch Screens

Name: BONTEC Dual Monitor Stand for 13-32 Inch Screens, Gas Spring Adjustable Monitor Arm, Full Motion VESA 75x75/100x100mm Desk Mount with Tilt, Swivel
Brand: BONTEC
SKU: B0CKPHX3D9

Status: BONTEC Dual Monitor Stand for 13-32 Inch Screens: Unavailable on Amazon as of 2026-10-07 10:22 UTC. SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

🛒 Search eBay for this model

Bottom line: The BONTEC Dual Monitor Stand for 13-32 Inch Screens: Holds up to 26.5 lbs per arm, covering most 27-32 inch panels; main trade-off: zinc alloy arms add noticeable weight to thin or hollow desks.

Unavailable on Amazon as of 2026-10-07 10:22 UTC

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: Ergear Single Monitor Mount for 13-32 Inch Screens — $19.99 on Amazon as of 2026-10-06 14:15 UTC (price may vary).

View Current Price — $19.99

Similar: MOUNT PRO Dual Monitor Stand — $29.99 on Amazon as of 2026-10-07 04:28 UTC (price may vary).

View Current Price — $29.99

Similar: UPGRAVITY 3 Monitor Desk Mount for 17 to 32 inch… — $35.19 on Amazon as of 2026-10-06 22:25 UTC (price may vary).

View Current Price — $35.19

Original listing (currently unavailable) → Compare to similar home & kitchen

By Mike Perry, Founder & Editor-in-Chief · Listing data updated 2026-10-07

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. About the author →

Pros & Cons

Pros

✓ Holds up to 26.5 lbs per arm, covering most 27-32 inch panels
✓ Fits both VESA 75x75mm and 100x100mm without extra adapters
✓ Wide 7.1 to 19.1 inch height range clears tall desk risers
✓ 360 degree rotation lets you flip either screen to portrait
✓ 23.3 inch max extension reaches across deep desks

Cons

✗ Zinc alloy arms add noticeable weight to thin or hollow desks
✗ Gas spring tension needs re-tuning whenever you swap monitor weight
✗ Clamp limited to desks 0.39-2.76 inches thick
✗ Snap-fit cable clips hold cords loosely versus enclosed channels

Manufacturer description

The BONTEC dual monitor stand mounts two 13-32 inch screens on a single desk clamp, and its gas spring arms carry up to 26.5 lbs per display - enough headroom for most 27-inch and 32-inch panels rather than just lightweight office screens. Mounting hardware covers VESA 75x75mm and 100x100mm patterns, so it drops onto the majority of monitors sold today. Height travels from 7.1 inches to 19.1 inches, and the arms extend up to 23.3 inches, which matters if you sit at a deep desk and want screens pulled forward to eye level. The zinc alloy structure is rated for 30,000 movement cycles with a…

SpecPicks Verdict

SpecPicks scored BONTEC Dual Monitor Stand for 13-32 Inch Screens using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. BONTEC's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this hold two 32-inch monitors?

Yes, if each monitor weighs 26.5 lbs or less. The stand is rated for 13-32 inch screens at up to 26.5 lbs per arm, which covers most 32-inch panels.

What VESA patterns does the BONTEC stand support?

It mounts VESA 75x75mm and 100x100mm patterns. Check the back of your monitor for one of those two hole spacings before ordering.

How thick can my desk be for the clamp to fit?

Desks from 0.39 to 2.76 inches thick work with either the included C clamp or the grommet base, so both thin glass and thick butcher-block tops are covered.

Can I rotate a monitor to portrait mode?

Yes. Each arm offers 360 degree rotation, plus 90 degrees of swivel in each direction and tilt from +85 to -50 degrees, so portrait orientation for code or documents is supported.

How far will the arms reach toward me?

Maximum extension is 23.3 inches per arm, with height adjustment from 7.1 to 19.1 inches. That is enough to pull screens forward on a deep desk.

Key Features

WIDE COMPATIBILITY FOR MULTIPLE SCREENS – BONTEC dual monitor stand fits 13–32 inch screens up to 26.5 lbs, 33% higher capacity than standard mounts. Supports VESA 75x75mm and 100x100mm, and works as a dual monitor arm stand, desk monitor mount for 2 monitors, or computer monitor mount for office, home office, gaming, or study setups
Ergonomic Design with Enhanced Height Range – Full motion gas spring arm offers +85° to -50° tilt, ±90° swivel, 360° rotation, and a superior height adjustment range from 7.1" to 19.1", 21% taller than typical arms; promotes better posture and reduces neck, back, and eye strain. Great for home office, gaming, creator workstations, or study desks
Reinforced Arm Structure for Maximum Stability – Constructed with high-grade zinc alloy and tested for 30,000 cycles, this dual monitor mount features a 33% longer and thicker rear segment to prevent sagging and slipping, delivering long-term durability for heavier screens
EXTENDED REACH WITH ORGANIZED SETUP – Features a 23.3" max extension, 33% longer than standard arms, for flexible monitor positioning even on deep desks. Built-in cable management with snap-fit clips keeps HDMI, power, and data cords neatly secured for a cleaner, more organized workspace
Simple Installation with Premium Finish – Installs easily using C clamp or grommet base for desks 0.39–2.76 inches thick; matte black scratch-resistant finish resists daily wear and cleans effortlessly, maintaining a sleek look in any modern office or gaming setup

Full Specifications

Brand	BONTEC
Color	Black
Material	Metal
Unit Count	1 Count
Model Number	GDM7504
Mounting Type	Tabletop Mount
Movement Type	Rotate
Mfr Part Number	GDM7504
Number of Packs	1
Compatible Devices	Monitor
Enclosure Material	Metal
Maximum Tilt Angle	90 degrees
Maximum-Supported Screen Size	32 inches
Minimum-Supported Screen Size	13 inches
Full listing title	BONTEC Dual Monitor Stand for 13-32 Inch Screens, Gas Spring Adjustable Monitor Arm, Full Motion VESA 75x75/100x100mm Desk Mount with Tilt, Swivel, Rotation, Ergonomic Design for Home Office or Gaming

Ready to buy?

Amazon shows no buyable offer for BONTEC Dual Monitor Stand for 13-32 Inch Screens at the last check. A similar in-stock product is Ergear Single Monitor Mount for 13-32 Inch Screens. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $19.99