Shaking Tank
Shaking Tank Jungle Leopard Prism 120mm 4 Pro ARGB Case Fan
Bottom line: The Shaking Tank Jungle Leopard Prism 120mm 4 Pro ARGB Case Fan ($7.99 on Amazon as of 2026-10-06): Three-sided infinity-mirror ARGB with 0.5mm-layered center effect; main trade-off: needs a 5V 3-pin header or extra control box for sync.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Three-sided infinity-mirror ARGB with 0.5mm-layered center effect
- ✓ 5V 3-pin ARGB syncs with motherboard RGB software
- ✓ Balanced 9-blade design spins 1000-1650 RPM PWM
- ✓ Runs quiet at 29dBA or less under full load
Cons
- ✗ Needs a 5V 3-pin header or extra control box for sync
- ✗ Small 4-pin power connector, not standard 4-pin PWM Molex
- ✗ Hydraulic bearing, not the longer-life fluid dynamic type
- ✗ Single-fan pack; multi-fan builds get pricey fast
SpecPicks Verdict
SpecPicks scored Shaking Tank Jungle Leopard Prism 120mm 4 Pro ARGB Case Fan using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. Shaking Tank's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Three sided Infinite Mirror ARGB light effect The side infinity mirrors on the left and right sides of the fan are based on infinite geometry Multiple layers 0.5mm apart are visible in the circular infinity mirror at the center of the fan
- Support +5V 3 PIN ARGB motherboard divine light synchronization
- High wind and low noise fan blades Balanced 9 blade design, increase the output wind pressure Improve the efficiency of heat dissipation, easily blow away the excess heat of the host,1000~1650RPM;≤29DBA
- Hydraulic bearing Ensure high speed operation, reduce wear, reduce noise, improve service life The bottom of the fan has a magnetic suction, which attracts the steel column on the fan page and has a strong suction force.
- Double-sided shock pad The silicone cushioning pad can effectively reduce the noise caused by resonance when installed on the chassis
- Warm tip: The power supply interface of the fan is small 4Pin and the light signal interface is 5V3Pin. Please confirm whether the motherboard you choose has 5V3Pin interface before purchase. If the motherboard does not have 5V3Pin interface, you need to purchase another control box to realize the synchronization function.
Full Specifications
| Brand | Shaking Tank |
|---|---|
| Model | prism 4 Pro BK |
| Voltage | 12 Volts (DC) |
| Wattage | 2.29 watts |
| Material | Alloy Steel |
| Unit Count | 1.0 Count |
| Noise Level | 29 Decibels |
| Part Number | prism 4 Pro BK |
| Compatibility | PC |
| Material Type | Alloy Steel |
| Cooling Method | Air |
| Number of Items | 1 |
| Compatible Devices | Desktop |
| Included Components | prism 4 Pro BK |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 1800 RPM |
| Item Dimensions L x W x H | 4.72"L x 0.98"W x 4.72"H |
| Full listing title | Jungle Leopard Prism 120mm 4 Pro ARGB Case Fan,Infinity Mirror RGB Light Effect 5V 3PIN Motherboard Light Sync 1000~1650RPM PWM PC Fan Suitable for Computer Cases and Liquid radiators |
Ready to buy?
Jungle Leopard Prism 120mm 4 Pro ARGB Case Fan,Infinity Mirror RGB Light Effect 5V 3PIN Motherboard Light Sync 1000~1650RPM PWM PC Fan Suitable for Computer Cases and Liquid radiators is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Best Mouse Pad for Competitive FPS Aiming on Large Desks (2026)
- Is the RTX 3060 12GB Still Worth It for Gaming in 2026?
- Best PlayStation and PC Controllers for 2026
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- Ryzen 7 9800X3D vs Ryzen 9 9950X3D: Which X3D Wins at 1440p in 2026?
- Open-WebUI on a Raspberry Pi 4: A Front-End for Your RTX 3060 LLM Rig
- DFlash Speculative Decoding on Qwen3.5-35B-A3B: How an RTX 2080 Super 8GB Hits 60+ tok/s
- Tenstorrent TT-QuietBox 2 (Blackhole) vs RTX 5090: Should LLM Builders Care?
- Tesla Capped AI Spend at $200/Week — Build a Local Inference Box for Less
- AMD's Ryzen 7 7700X3D Goes Newegg-Exclusive at $329
- Add NVMe Boot and Active Cooling to a Raspberry Pi 5 in 2026
- Build a Motion-Triggered Wildlife Camera on Raspberry Pi (2026)
- DIY Ambient Home Hub: Raspberry Pi CM4 + ESP32-S3 for Kids
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- Best Gaming Headset in 2026 for Gaming and Music
- Strix Halo vs RTX 3060 12GB: Unified Memory or Discrete VRAM?
- Best Gaming Monitor for 1440p Under $400 (2026)
- Intel IPEX-LLM vs Ollama on AMD: AI Rig Guide 2025
- NES Graphics Upgrade Mod Gains Community Traction
- Samsung's 256GB microSD Drops to $47.99 — and What It Means for Cheap Storage
- Open Source AI Code Reviewers You Can Self-Host in 2025
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090