NICE-POWER DC Power Supply Variable 0~30V 0~10A
Bottom line: The NICE-POWER DC Power Supply Variable 0~30V 0~10A: Switches between 15V/10A and 30V/5A modes on one 150W supply; main trade-off: 150W cap: full 10A limited to 15V, 30V limited to 5A.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Switches between 15V/10A and 30V/5A modes on one 150W supply
- ✓ Encoder knobs set voltage to 0.1V and current to 0.01A
- ✓ 3-digit LED shows live voltage and current readouts
- ✓ Compact 10x18.5x8cm and under 1kg for tight benches
- ✓ 100-240V 50/60Hz input runs worldwide without a transformer
Cons
- ✗ 150W cap: full 10A limited to 15V, 30V limited to 5A
- ✗ Single output channel, no dual or tracking outputs
- ✗ Cooling fan auto-starts, adding noise on a quiet bench
- ✗ Maker warns to stop and cool down if it overheats
SpecPicks Verdict
SpecPicks scored NICE-POWER DC Power Supply Variable 0~30V 0~10A using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. NICE-POWER's power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Newly upgraded 150W DC power supply with higher voltage and current: This DC power supply can be freely switched between 15V 10A and 30V 5A. When the current value is set to 10A, the voltage value cannot exceed 15V. If the voltage value is set to 30V, the current value cannot exceed 5A. [The device can only output 150 W, but don't worry, the device cannot be set to output current and voltage values exceeding 150 W.]
- Ultra small size, Ultra full functionality, Cool fan automatic start : This DC power supply is only 10*18.5*8CM in size and weighs less than 1KG. It is lightweight, portable, and compact in design. When you cannot fit a larger power supply, this DC power supply is the most cost-effective choice. The DC power supply cool fan automatic starts, allowing the DC power supply to quickly cool down and extend its service life
- 3-Digit display and Encoder button precise adjustment : The voltage value of the DC power supply is accurate to 0.1V, while the current is accurate to 0.01A. By using the latest encoder buttons, the desired current and voltage values can be accurately adjusted. Just "set" the voltage and current, not "adjust" them. You can press the voltage and current encoder knobs to select the number to be adjusted, and then rotate the knob to set the value between 0 and 9. Each number can be easily set through a precise encoder knob. Encoder switches have replaced potentiometer switches, making your work easier, more accurate, and more efficient
- Instructions for use: (Please note: That when the DC power supply is too hot, please stop using it and wait for it to cool down before use to prevent irreversible damage to the DC power supply.)
- Wide range of input AC voltage: The input AC voltage is 100V~240V of NICE-POWER DC power supply model is SPS-E3010, and the frequency is 50~60Hz±10%, which meets the use of more than 90% of the countries and regions in the world. No matter where you are, you can use this DC power supply safely without the use of a transformer, which is safer and more secure
- High quality products and efficient after-sales service: When you purchase a DC power supply, you will receive 1*DC power supply, 1 * Output Power Cords , 1* Input Power Cord, and 1*user manual. We offer a after-sales service and 24-hour technical support. If you have any questions, please contact us without hesitation
Full Specifications
| Brand | NICE-POWER |
|---|---|
| Weight | 1kg |
| Wattage | 150 watts |
| Model Name | SPS-E3010 |
| Unit Count | 1 Count |
| Form Factor | Benchtop |
| Model Number | SPS-E3010 |
| Connector Type | Benchtop Power Supply Connectors |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 150 |
| Mfr Part Number | SPS-E3010 |
| Compatible Devices | Personal Computer |
| Connector Quantity | 3 |
| Power Supply Design | External |
| Number of Connectors | 3 |
| Maximum Input Voltage | 110 volts_of_alternating_current |
| System Bus Connector Type | 24 Pin |
| Connector Type Used on Cable | Benchtop Power Supply Connectors |
| Full listing title | NICE-POWER DC Power Supply Variable 0~30V 0~10A, 3-Digits LED Display Current and Voltage Adjustable 150W Fixed with Encoder DC Bench Power Supply 15V 10A/30V 5A,Electroplating DIY etc PSU |
Ready to buy?
NICE-POWER DC Power Supply Variable 0~30V 0~10A, 3-Digits LED Display Current and Voltage Adjustable 150W Fixed with Encoder DC Bench Power Supply 15V 10A/30V 5A,Electroplating DIY etc PSU is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget AMD Gaming PC Upgrades in 2026: 5 Parts That Move the Needle
- Samsung 870 EVO vs Crucial BX500: Best SATA SSD 2026
- Best Budget Gaming Audio for 2026: Headsets, Earbuds, Mics and DACs
- Best Streaming Gear for PC Gamers in 2026
- Booting Windows 98 From CompactFlash: The Silent Solid-State Retro Drive
- Why Privacy-Preserving AI Demand Is Rising in the LLM Era
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- ZOTAC RTX 3060 Twin Edge vs MSI RTX 3060 Ventus 3X: Which 12GB Card?
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for Running Llama 8B Under $300 in 2026
- RTX 5090 Prebuilt vs a $700 RTX 3060 Local-LLM Box: What Extra VRAM Actually Buys
- Shared ChatGPT & Claude Chats Are Spreading Malware — Run a Local LLM on a 12GB GPU Instead
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
- Best RGB Lighting for a Gaming PC Desk: LED Strips and Case Fans Done Right
- Best USB Microphone for Streaming in 2026: QuadCast 2 vs Yeti
- Ring Light vs LED Strips: What Actually Fixes a Grainy Webcam
- Best USB Microphones for Streaming and Podcasting (2026)
- Best USB Microphone and Streaming Kit for Creators in 2026
- Raspberry Pi LLM Cluster: What It Can (and Can't) Do
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- KOORUI 27" 4K QD-Mini LED: Is a Budget 4K Gaming Monitor Enough for an RTX 3060?
- Best Gaming Controllers for PC in 2026: 5 Top Picks
- Raspberry Pi 4 8GB Homelab in 2026: Jellyfin, Pi-hole and Home Assistant on One Board
- 18 LLMs Benchmarked on OCR: Why Cheaper Models Often Win
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090