UTP-X Ultra Thermal Putty,Cooling Pad for GPU VGA IC Processor,20g
Bottom line: The UPSIREN UTP-X Ultra Thermal Putty: 16.8 W/mK conductivity, well above typical soft thermal pads.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 16.8 W/mK conductivity, well above typical soft thermal pads
- ✓ Replaces pads up to 3mm thick on uneven GPU VRAM and IC surfaces
- ✓ Non-conductive formula avoids short circuits on exposed board traces
- ✓ Rated to 250C operating temperature for sustained GPU loads
- ✓ Spatula included; moldable gummy texture spreads without pump-out
Cons
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
UTP-X Ultra Thermal Putty is a moldable thermal compound engineered for computer cooling modification. Featuring thermal conductivity above 16.8 W/mK, it serves as an ideal substitute for traditional soft thermal pads with thickness within 3mm. Made with non-conductive formula, this thermal putty prevents short circuits while delivering steady heat transfer. The pliable texture fits irregular component surfaces perfectly. It is widely compatible with GPU, VGA video card, memory modules, IC chips and CPU processors for desktop PCs and gaming laptops. Included applicator spatula supports…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for UPSIREN UTP-X Ultra Thermal Putty, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Its clearest listed strength is "16.8 W/mK conductivity, well above typical soft thermal pads"; check that against the figure your use case actually depends on, then compare close alternatives in the Compare tool.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- NOT SUITABLE FOR CPU INSTALLATION: Thermal conductivity over 16.8 W/mK, works as replacement for soft thermal pads up to 3mm thickness to transfer heat for GPU and IC chips.
- NON-CONDUCTIVE & SAFE: It won’t conduct electricity to prevent short circuits, maintaining stable performance under max operating temperature up to 250°C.
- MOLDABLE & EASY TO APPLY: Flexible gummy texture fits uneven chip surfaces. Comes with a spatula for simple and tidy installation operation.
- WIDE COMPATIBILITY: Suitable for GPU, VGA graphics card, memory chips, IC modules, gaming laptops and various commercial electronic components.
- LONG-LASTING DURABILITY: Hardly dries or hardens after long time use, ideal cooling upgrade for PC builders, hardware modders and maintenance workers。
Full Specifications
| Brand | UPSIREN |
|---|---|
| Weight | 20g |
| Compatibility | PC |
| Package Dimensions | 5.16 x 3.94 x 1.34 inches |
| WIDE COMPATIBILITY | Suitable for GPU, VGA graphics card, memory chips, IC modules, gaming laptops and various commercial electronic components. |
| NON-CONDUCTIVE & SAFE | It won’t conduct electricity to prevent short circuits, maintaining stable performance under max operating temperature up to 250°C. |
| LONG-LASTING DURABILITY | Hardly dries or hardens after long time use, ideal cooling upgrade for PC builders, hardware modders and maintenance workers。 |
| MOLDABLE & EASY TO APPLY | Flexible gummy texture fits uneven chip surfaces. Comes with a spatula for simple and tidy installation operation. |
| NOT SUITABLE FOR CPU INSTALLATION | Thermal conductivity over 16.8 W/mK, works as replacement for soft thermal pads up to 3mm thickness to transfer heat for GPU and IC chips. |
Benchmark data for other processors
Ready to buy?
UTP-X Ultra Thermal Putty,Cooling Pad for GPU VGA IC Processor,20g is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming: Which Wins?
- Best Work-From-Home Kit for Gamers in 2026
- Ryzen 7 5800X vs 5700X for 1080p High-Refresh Gaming
- Handheld Gaming PCs With a Keyboard: 2025 Guide
- Best Streaming Gear for Starting a Channel in 2026
- OpenAI Codex 'Watch Once, Repeat Forever': What It Means for Local Coding Rigs
- Best CPU Coolers for High-TDP Gaming Builds in 2026
- RTX 3060 12GB vs RTX 5060: Best Value for 1080p Gaming + Local AI
- Raspberry Pi 5 8GB Review (2026): Still the SBC to Beat
- Building a New Gaming PC in 2026: The Complete Guide
- Best Raspberry Pi 5 Alternatives in 2025
- Gemma 3 12B vs Qwen2.5 14B on a 12 GB RTX 3060: Which Fits, Which Is Faster
- Running a Local Coding Agent on an RTX 3060 12GB: Qwen3-Coder in Practice
- DwarfStar Distributed Inference: Splitting a Single LLM Across a Home LAN of Mismatched GPUs
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- Kimi K2.7 Code on an RTX 3060 12GB: Can a $300 GPU Run It?
- Zhipu ZCode vs Claude Code: Cheaper Agentic Coding, and the Rig to Run It
- Best PC and Console Game Controller in 2026
- Best Mac for AI & LLM Workloads in 2026
- DeepSeek 4 Flash on 128GB MacBook: Local Inference Throughput Reality Check
- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- Build a $20 DualSense PC Adapter: The Open-Source Sony Workaround
- Ryzen 5 5600G vs Ryzen 7 5700X: Best CPU for a First Gaming PC in 2026
- How Much VRAM Does 32k Context Use on an RTX 3060 12GB? (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090