No Clean Soldering Flux 558 10CC 10mL Lead-Free Less-Smoke Rosin Solder Fluxes Paste Syringe for Electronics 10 milliliters with Needle Dispensing Tool (Pack of 1Pcs)
Bottom line: The No Clean Soldering Flux 558 10CC 10mL Lead-Free Less-Smoke Rosin: No-clean rosin paste: skip the IPA scrub after board repairs; main trade-off: 10mL syringe runs down fast on heavy reflow or chip-pull sessions.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ No-clean rosin paste: skip the IPA scrub after board repairs
- ✓ Comes with two needle tips (red and white) for fine or bulk deposits
- ✓ Non-corrosive and non-conductive, safe to leave on populated PCBs
- ✓ Lead-free formula suited to RoHS rework on modern boards
Cons
- ✗ 10mL syringe runs down fast on heavy reflow or chip-pull sessions
- ✗ Paste flux is messier to control than a flux pen for single joints
- ✗ Plunger syringes can ooze in warm rooms if left tip-down
- ✗ Listing states no shelf life but gives no cure or storage temp spec
SpecPicks Verdict
SpecPicks scored No Clean Soldering Flux 558 10CC 10mL Lead-Free Less-Smoke Rosin… using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. ALLECIN's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ALLECIN No Clean Soldering Flux 558 10CC 10mL -- For solder repair work on a variety of electronic equipment.
- ALLECIN Syringe Type Flux is an opaque white paste with rosin synthetic resin as the main component.
- Features & Advantages: Lead-Free, Non-Corrosive, Non-conductive, Moisture-proof, Stable Performance, Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell.
- Easy to use: This product comes with a plunger and two different sized Needles (red and white) to place the flux exactly where it is needed, making your circuit boards and other manufacturing and maintenance work easier.
- Humanized packaging for easy storage and use. # Please confirm the voltage before purchasing.
Full Specifications
| Brand | ALLECIN |
|---|---|
| Package Dimensions | 5.59 x 2.13 x 1.26 inches |
| Features & Advantages | Lead-Free, Non-Corrosive, Non-conductive, Moisture-proof, Stable Performance, Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell. |
Ready to buy?
No Clean Soldering Flux 558 10CC 10mL Lead-Free Less-Smoke Rosin Solder Fluxes Paste Syringe for Electronics 10 milliliters with Needle Dispensing Tool (Pack of 1Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best 4K Gaming Monitor Under $500 in 2026
- Troubleshooting Ryzen 5 5600X No-POST: Memory, BIOS, and Cooler Mount Fixes (2026)
- Building a Sim Racing Cockpit Under $500: Logitech G29 + Thrustmaster TH8A Shifter
- RX 9060 XT vs RX 9070 XT: OLED 1440p or 4K IPS?
- Intel-Scaler vLLM 0.21.0: What the New Release Changes for Intel GPU Inference
- Best GPU for Local LLMs Under $400 in 2026: Why 12GB Still Wins
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Local LLM Benchmarks 2025: AMD Instinct vs Radeon Pro
- Jetson Orin Nano Super vs Coral USB: Which One Runs an LLM?
- Intel Arc A770 16GB for Local LLMs: 2025–2026 Guide
- Best Budget PC Gaming Upgrades Under $200 in 2026
- Build a Silent Raspberry Pi 5 NAS with NVMe and Active Cooling in 2026
- Best Plug-and-Play Retro Console to Buy in 2026
- Cerebras Running GPT-5.4 and GPT-5.5 Internally: What the CFO's Slip Tells Us About Wafer-Scale Inference
- Voodoo 5 6000 Lab Method: Two Motherboards, One Dead BIOS
- RTX 3060 12GB vs RTX 5060: Best Value for 1080p Gaming + Local AI
- Logitech G920 vs HORI Racing Wheel: Best Sim Racing Wheel for PS5 & PC
- Best Local LLM Parts to Buy Before the 2026 Memory Spike
- GameSir G7 SE vs 8BitDo Pro 2 for PC Gaming: Wired Precision vs Wireless Flexibility
- Best Budget GPU for RPCS3 PS3 Emulation in 2026
- RTX 5090 vs RTX 3090: Specs, Gaming & AI Compared (2026)
- Corsair's New Gaming Mouse Has a Dedicated Stream Deck Launch Button
- Raspberry Pi AI HAT+ 2 Review: 4 TOPS Edge AI on 1.2W
- Windows XP on Steam Deck: Retro Setup Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090