iUniker

iUniker PCIe M.2 HAT+ for Raspberry Pi 5

Name: iUniker PCIe M.2 HAT+ for Raspberry Pi 5, NVMe SSD PIP PCIe Peripheral Board With Extra Screw Sets for 2280/2260/2242/2230 NVMe SSD
Brand: iUniker
SKU: B0D948WZJV

Status: iUniker PCIe M.2 HAT+ for Raspberry Pi 5: Unavailable on Amazon as of 2026-10-22 10:29 UTC. SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

🛒 Search eBay for this model

Bottom line: The iUniker PCIe M.2 HAT+ for Raspberry Pi 5: Takes 2280, 2260, 2242 and 2230 M.2 Key-M drives; main trade-off: NVMe SSD not included, so budget for a drive on top.

Unavailable on Amazon as of 2026-10-22 10:29 UTC

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: Geekworm X1001 PCIe to M.2 HAT Key-M NVMe SSD… — $13.90 on Amazon as of 2026-10-25 22:15 UTC (price may vary).

View Current Price — $13.90

Similar: Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 — $9.95 on Amazon as of 2026-10-25 22:16 UTC (price may vary).

View Current Price — $9.95

Similar: GeeekPi N04 M.2 NVMe to PCIe Adapter for… — $12.90 on Amazon as of 2026-10-25 10:13 UTC (price may vary).

View Current Price — $12.90

Original listing (currently unavailable) → Compare to similar single-board computers

By Mike Perry, Founder & Editor-in-Chief · Listing data updated 2026-10-22

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. About the author →

Pros & Cons

Pros

✓ Takes 2280, 2260, 2242 and 2230 M.2 Key-M drives
✓ Ships extra screws and nuts for the shorter SSD lengths
✓ Clears the official Raspberry Pi 5 Active Cooler
✓ INV001 revision uses an impedance-matched custom FPC cable

Cons

✗ NVMe SSD not included, so budget for a drive on top
✗ Listed for Raspberry Pi 5 8GB/4GB only, no other Pi boards
✗ M.2 Key-M drives only; Key-B or SATA M.2 will not work
✗ Board-only kit, no case or standoff-height guidance provided

Manufacturer description

About this item 【Latest Version】INV001 version, the custom FCC cable and multiple tests have resulted in the most stable and highly compatible NVMe expansion board for the RPI5. 【Compatibility】Raspberry Pi 5 NVME HAT only for Raspberry Pi 5 8GB/4GB 【M.2 Key-M NVMe SSD Supported】Compatible with M.2 Key-M NVMe SSD 2280/2260/2242/2230 length (SSD is not included, will provide extra screws and nuts for 2260/2242/2230) 【Cooling Solution】Support Raspberry Pi 5 official Active Cooler installation 【Custom FPC Cable】 Custom FPC cable with impedance design, Greater Compatibility › See more product…

SpecPicks Verdict

SpecPicks scored iUniker PCIe M.2 HAT+ for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. iUniker's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

【Latest Version】INV001 version, the custom FCC cable and multiple tests have resulted in the most stable and highly compatible NVMe expansion board for the RPI5.
【Compatibility】Raspberry Pi 5 NVME HAT only for Raspberry Pi 5 8GB/4GB
【M.2 Key-M NVMe SSD Supported】Compatible with M.2 Key-M NVMe SSD 2280/2260/2242/2230 length (SSD is not included, will provide extra screws and nuts for 2260/2242/2230)
【Cooling Solution】Support Raspberry Pi 5 official Active Cooler installation
【Custom FPC Cable】 Custom FPC cable with impedance design, Greater Compatibility

Full Specifications

ASIN	B0D948WZJV
Brand	iUniker
Manufacturer	iUniker
Model Number	INV001
Built-In Media	NVMe HAT, Screws, FFC Cable, User Manual
Compatible Devices	Raspberry Pi 5
Hardware Interface	PCI Express x4
Warranty Description	1 year manufacture
Full listing title	iUniker PCIe M.2 HAT+ for Raspberry Pi 5, NVMe SSD PIP PCIe Peripheral Board With Extra Screw Sets for 2280/2260/2242/2230 NVMe SSD

Hardware benchmark data

Ready to buy?

Amazon shows no buyable offer for iUniker PCIe M.2 HAT+ for Raspberry Pi 5 at the last check. A similar in-stock product is Geekworm X1001 PCIe to M.2 HAT Key-M NVMe SSD…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $13.90