MLemonVR 7-in-1 Protective Silicone Cover Set for Meta Quest 3s_Stripe Red
Bottom line: The MLemonVR 7-in-1 Protective Silicone Cover Set: Complete 8-piece kit: shell, 2 grips, face cover, lens cover, cloth, 2 joystick caps; main trade-off: fits only Meta Quest 3S, not the standard Quest 3 or older models.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Complete 8-piece kit: shell, 2 grips, face cover, lens cover, cloth, 2 joystick caps
- ✓ Quick-access battery openings on grips swap batteries without removing covers
- ✓ Precision-cut vents preserve Quest 3S ventilation and tracking signal
- ✓ Soft skin-friendly silicone face cover cuts sweat on long sessions
- ✓ Light-blocking nose guard reduces light leak for deeper immersion
Cons
- ✗ Fits only Meta Quest 3S, not the standard Quest 3 or older models
- ✗ Silicone attracts lint and dust, needs regular wiping
- ✗ Added grip bulk changes controller feel for some users
- ✗ Face cover fit and light seal vary by face shape
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MLemonVR 7-in-1 Protective Silicone Cover Set, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the vr headsets & accessories category before committing. On the listing's own facts, the case for it is "Complete 8-piece kit: shell, 2 grips, face cover, lens cover, cloth, 2 joystick caps"; the main trade-off is "Fits only Meta Quest 3S, not the standard Quest 3 or older models". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- All-Around Protection for Meta Quest 3S: This complete silicone cover set provides comprehensive protection for your Meta Quest 3S, including a VR headset protective shell, two controller grips, a face cover, lens cover, lens cleaning cloth, and two joystick caps. Each piece guards against scratches, impacts, and general wear, preserving your device's durability and appearance over time
- Enhanced Comfort for Longer Play: Made from soft, skin-friendly silicone, the face cover helps prevent sweat buildup, keeping you comfortable during extended gaming sessions. Its light-blocking nose guard enhances immersion, letting you dive deeper into the VR experience
- Quick Battery Access for Uninterrupted Gameplay: The upgraded controller grips feature an easy-access battery compartment, allowing for fast battery replacements without removing the entire cover. Adjustable knuckle straps provide a secure fit for all hand sizes, ensuring stability and comfort while minimizing accidental drops
- Durable Headset Protection: The silicone headset shell offers excellent shock absorption, protecting your headset and lenses from accidental bumps and scratches. With precision-cut openings for proper ventilation and signal integrity, the cover fits seamlessly onto the Meta Quest 3S without compromising performance
- Stylish and Functional Accessory Set: This protective set is designed for easy installation and cleaning, enhancing your VR experience with added comfort, grip, and functionality while giving your Meta Quest 3S a sleek and modern look
Full Specifications
| Brand | MLemonVR |
|---|---|
| Color | Stripe_Red |
| Platform | Meta Quest |
| Model Name | For Meta quest 3s |
| Resolution | 1832x1920 |
| Unit Count | 1 Count |
| Display Type | LCD |
| Built-In Media | 1x Glasses Cloth, 1x Lens Cover, 1x VR Shell Cover, 2x Controller Grip Cover, Silicone Cover |
| Controller Type | Motion-sensing controller |
| Sensor Technology | Accelerometer Gyroscope Magnetometer |
| Compatible Devices | Meta Quest 3s |
| Additional Features | All-Around Protection, Lightweight, Not block the signal |
| Warranty Description | 1 |
| Age Range Description | Adult |
| Specific Uses For Product | Gaming |
| Display Maximum Resolution | 1832x1920 |
| Display Resolution Maximum | 1832x1920 |
| Full listing title | MLemonVR 7-in-1 Protective Silicone Cover Set for Meta Quest 3s_Stripe Red | VR Protector Set: Face Cover, Battery Opening Controller Grips, Front Shell Cover, and Lens Protective Cover |
Ready to buy?
MLemonVR 7-in-1 Protective Silicone Cover Set for Meta Quest 3s_Stripe Red | VR Protector Set: Face Cover, Battery Opening Controller Grips, Front Shell Cover, and Lens Protective Cover is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Forza Horizon 6 Runs Smooth on Steam Deck — the Dock-and-Settings Combo
- How to run Qwen 3 32B on AMD Radeon RX 7900 XTX
- How to run DeepSeek-R1 32B on Apple M3 Ultra
- US Forces Anthropic to Disable Claude Fable 5: Local Fallbacks
- Quiet RTX 3060 12GB Local LLM Box: Build Notes from a Real Setup
- US Government Forces Anthropic to Disable Claude Fable 5 Worldwide
- Best SATA SSD for a 2026 Game Library Drive
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 With Free Cooler
- Best Game Controllers for PC and Emulation in 2026
- Automated Cabinet Lighting With a Raspberry Pi: Build Guide
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 with a Free Cooler
- Intel Arc Pro B60 24GB vs RTX 3060 12GB: the VRAM math
- Best CPU Cooler for the Ryzen 7 5800X in 2026
- Best 4K Monitor Under $400 for Console & PC Gaming 2026: SANSUI vs KOORUI vs ASUS TUF
- Did the Steam Deck Get a New Box Design? What Changed
- DeepSeek V4 vs Claude Opus 4.6: Local Inference Hardware for the Open-Weight Challenger
- Ryzen 7 5800X vs i7-9700K: Better Home Workstation in 2026?
- Resident Evil Code: Veronica on a CRT — Why It Still Hits Different
- Best SSD for a PS4 Pro Upgrade in 2026
- R36S Retro Handheld: Real Specs vs. the Hype (2026 Guide)
- Best Retro PC Storage Adapters in 2026: IDE, SATA & CompactFlash Picks
- Black Friday Gaming Peripheral Deals: 5 Headset, Keyboard, Mouse and Webcam Picks
- Logitech G920 vs HORI Racing Wheel: Best Beginner Sim Setup (2026)
- Self-Hosting DeepSeek on an RTX 3060 12GB: What Fits in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090