Puikos Honeycomb Laser Bed 400 x 400 mm Working Table
Status: Puikos Honeycomb Laser Bed 400 x 400 mm Working…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The Puikos Honeycomb Laser Bed 400 x 400 mm Working Table: Four 400x100mm aluminum panels assemble into a 400x400mm bed; swap one if it wears; main trade-off: no interlocking clips between panels, so sections can shift or slide off.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Four 400x100mm aluminum panels assemble into a 400x400mm bed; swap one if it wears
- ✓ Adjustable Y-axis lets you build a custom-size worktable, not just 400x400
- ✓ Oversized air duct vents smoke and heat to cut charring on the material back
- ✓ Integrated base plate catches cutting debris and shields the tabletop underneath
Cons
- ✗ No interlocking clips between panels, so sections can shift or slide off
- ✗ Must sit flat on a worktable per the maker's own placement warning
- ✗ Aluminum panels add height, so you re-focus the laser after installing
- ✗ Fit is size-based only; verify your D1 or CO2 frame clears 400x400mm
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Puikos Honeycomb Laser Bed 400 x 400 mm Working Table, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the displays & upscalers category before committing. On the listing's own facts, the case for it is "Four 400x100mm aluminum panels assemble into a 400x400mm bed; swap one if it wears"; the main trade-off is "No interlocking clips between panels, so sections can shift or slide off". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Modular & Customizable】The honeycomb laser bed is built with 4 pcs 400x100mm aluminum alloy panels, easily assembled into a 400x400mm workspace. The adjustable Y-axis and modular design allow you to create a custom-sized worktable. Plus, if one panel wears out, just replace that single piece, save costs.
- 【Protect Your Workspace】The integrated grill and base plate design not only shields your tabletop from damage but also collects all cutting debris. Keep your work area clean and safe, with no more burnt or messy surfaces to worry about.
- 【Flawless Creative Results】Featuring an oversized air duct design, our honeycomb board quickly vents smoke and heat, preventing materials from overheating and turning black. Say goodbye to burn marks and hello to clean, professional-quality creations every time.
- 【Universal Compatibility】Perfectly compatible with CO2 laser engravers, diode cutters, fiber optic engravers, and most mainstream engraving machines. As long as the size fits, our honeycomb workbench is ready to enhance your creative projects.
- 【Reliable After-Sales Support】We’re committed to your satisfaction. If you have any questions or issues, contact us anytime. Our team will respond within 24 hours and provide effective solutions to ensure a seamless experience.
- Note: There are no interlocking clips between the panels. Please ensure the product is placed flat on the worktable to prevent it from sliding off.
Full Specifications
| Note | There are no interlocking clips between the panels. Please ensure the product is placed flat on the worktable to prevent it from sliding off. |
|---|---|
| Brand | Puikos |
Ready to buy?
Amazon shows no buyable offer for Puikos Honeycomb Laser Bed 400 x 400 mm Working… at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Build a Low-Power Jellyfin Server on a Raspberry Pi 4 8GB in 2026
- Voodoo 3 3500 TV vs GeForce 256 DDR: The Last Great 1999 Gaming GPU Showdown
- Ryzen 7 5800X vs Intel Core i7-9700K for 1080p Gaming in 2026: Which Budget Chip Wins?
- ComfyUI on an RTX 3060 12GB: Stable Diffusion & Flux Throughput in 2026
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Best 4K Monitor for Forza Horizon 6 on PC (2026)
- UT99 OldUnreal 469 Patch in 2026: Migrate Configs, Rejoin Modern Servers, and Tune Mouse Precision
- DualSense vs 8BitDo Pro 2: Best PC Controller in 2026
- 768GB Optane vs RTX 3060 12GB: The Trillion-Param LLM Reality
- Best Microphone for Streaming and Podcasting Under $200 in 2026
- Best GPU for Forza Horizon 6 at 1440p in 2026 (Without Breaking the Bank)
- HyperX QuadCast 2 S vs Blue Yeti for Streaming in 2026
- Ryzen 7 5800X vs Core i7-9700K for 1080p Esports in 2026
- Raspberry Pi 5 IOMMU Driver Heads to the Mainline Linux Kernel
- Run Local LLMs on a Ryzen 5 5600G With No GPU (2026)
- Best Controllers for Retro Gaming and Emulation in 2026
- SteamDSXL Yay or Nay? Dual-Screen Steam Deck Dock Review
- Old Massive Chieftec Full Tower: Homelab Gem or Junk?
- Raspberry Pi 5 IOMMU Support Is Landing in the Mainline Linux Kernel
- Gemini-Class Models on Local Hardware: How Much VRAM You Actually Need
- Best PC Gaming Controllers in 2026: 5 Top Picks
- Llama 3.3 70B: Dual RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Best 4K Monitor for PS5 (4K/120Hz) in 2026
- Best PC Controller in 2026: DualSense vs GameSir G7 SE vs HORIPAD
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090