Alxum
Alxum NVME M.2 SATA IDE SSD Enclosure External 3 in 1 Tool-Free PCIE-10Gbps USB 3.2 Type C Hard Drive Reader for 2230/2242/2260/2280,2.5" /3.5" SATA SSD and 3.5" IDE HDD
Bottom line: The Alxum NVME M.2 SATA IDE SSD Enclosure External 3 in 1 Tool-Free ($35.99 on Amazon as of 2026-10-21 16:17 UTC): Reads NVMe M.2, 2.5/3.5-inch SATA and 3.5-inch IDE drives in one unit; main trade-off: no drive cloning support, so migrations are file-copy only.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Reads NVMe M.2, 2.5/3.5-inch SATA and 3.5-inch IDE drives in one unit
- ✓ All three drives mount at once for direct old-to-new file transfers
- ✓ 10Gbps USB 3.1 Gen 2 Type-C link with UASP and TRIM support
- ✓ Fits 2230, 2242, 2260 and 2280 NVMe SSDs, M key or B&M key
- ✓ Ships with USB-C cable, 4-pin IDE power cable and 12V 2A adapter
Cons
- ✗ No drive cloning support, so migrations are file-copy only
- ✗ 3.5-inch SATA drives require the external 12V power adapter
- ✗ Optical drives not supported on the SATA or M.2 ports
- ✗ IDE support listed for 3.5-inch drives only, not 2.5-inch laptop IDE
Manufacturer description
The Alxum 3-in-1 SSD enclosure is a single USB-C dock for almost any drive you are likely to pull from a closet or an old build. The M.2 slot takes PCIe NVMe SSDs in 2230, 2242, 2260 and 2280 lengths (M key or B&M key). The SATA port handles 2.5- and 3.5-inch drives, and a 3.5-inch IDE connector reads legacy IDE 100 hard disks from retro PCs. You can connect all three drives at once, and each one appears as its own disk. That lets you copy files from an old IDE drive straight onto a new NVMe SSD without opening a case. The USB 3.1 Gen 2 Type-C link runs at up to 10Gbps with UASP and TRIM…
SpecPicks Verdict
SpecPicks scored Alxum NVME M.2 SATA IDE SSD Enclosure External 3 in 1 Tool-Free… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. Alxum's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can I connect an NVMe, a SATA and an IDE drive at the same time?
Yes. The Alxum enclosure can read all three interfaces at once, and each drive shows up as a separate disk, so you can copy data directly between them.
Will it read an old IDE hard drive from a retro PC?
It supports 3.5-inch IDE hard drives using the IDE 100 protocol, and the box includes a 4-pin IDE power cable. The listing does not mention 2.5-inch laptop IDE drives, so check the product listing before buying for one.
Which M.2 SSD sizes fit in the enclosure?
It accepts PCIe NVMe M.2 SSDs in 2230, 2242, 2260 and 2280 lengths, with either M key or B&M key.
Do I need external power for my drive?
A 3.5-inch SATA hard disk needs external power, and the box includes a 12V 2A power cable for it. The M.2 slot runs over the USB-C connection.
Can I clone one drive to another with this adapter?
No. Alxum says this enclosure does not support cloning, so use it for copying files, backups and data migration instead.
Key Features
- 【3 IN 1 Hard Drive Reader】This adapter adopts the PCIe 3.1a M.2 interface, SATA 3.1, and IDE 100 interface protocols. It supports reading three hard drives simultaneously and can display three disk symbols at the same time. It enables easy data transfer between old and new devices. Whether it's for data access, backup of old devices, or data management and migration, this M.2 SATA IDE hard drive enclosure can handle the tasks perfectly. The LED indicator monitors the device status in real - time, ensuring that users are always in control of the operation.
- 【Alxum M.2 SATA IDE External SSD Enclosure】 Breaking through the limitations of traditional built-in M.2 designs, it offers a threefold upgraded experience. By adopting an advanced heat dissipation architecture, the heat dissipation efficiency is improved by 30%, and the service life of the device is significantly extended. The combination of SATA and IDE dual interfaces enables both ultra-fast data transfer via NVMe and compatibility with the large-capacity storage of traditional hard drives, truly achieving a perfect balance between speed and capacity.
- 【10Gbps High-Speed Transmission】Equipped with a USB 3.1 Gen 2 Type - C interface. It is plug - and - play and does not require the installation of a driver. It automatically enters the sleep mode after 30 seconds of inactivity. It supports the UASP and TRIM protocols, offering an ultra - high transmission rate of up to 10Gbps, allowing you to transfer 4K high - definition movies or large files of several gigabytes within seconds. Moreover, it is backward - compatible with USB 3.1 and USB 3.0.
- 【Wide Compatibility】It supports 2230/2242/2260/2280 PCIE NVME M.2 SSDs (M Key/B&M Key), 2.5/3.5 - inch SATA SSDs, and 3.5 - inch IDE hard drives. The Type - C interface is compatible with devices such as laptops, desktops, tablets, and smartphones (it is recommended to use the exFAT/FAT/FAT32 format for smartphones).
- 【Package Content】1×USB-C to M.2/SATA/IDE adapter, 1× USB Type-C to Type-C cable,1×4-pin IDE hard disk power cable, 1×12V 2A power cable. Note:1. this SSD enclosure does not support cloning operations. 2.An external power supply is required to connect a 3.5-inch SATA hard disk.3. The SATA interface and M.2 interface only support hard drive devices (neither supports optical drive devices).
Full Specifications
| Brand | Alxum |
|---|---|
| Connectivity | USB-C |
| Model Number | S1235A |
| Mfr Part Number | S1235A |
| Hardware Platform | Universal |
| Compatible Devices | Desktop, Laptop, Smartphone, Television |
| Data Transfer Rate | 10 Gigabits Per Second |
| Hardware Interface | USB 3.2 Gen 2 |
| Warranty Description | 2 year customer service |
| Hard Disk Form Factor | 3.5 Inches |
| Supported Devices Quantity | 3 |
Ready to buy?
Alxum NVME M.2 SATA IDE SSD Enclosure External 3 in 1 Tool-Free PCIE-10Gbps USB 3.2 Type C Hard Drive Reader for 2230/2242/2260/2280,2.5" /3.5" SATA SSD and 3.5" IDE HDD is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Inkling's 975B Open-Weight Speech Model — and the 12GB Rig That Transcribes Free
- Building a Period-Correct 2002 GeForce 4 Ti + Pentium 4 Northwood Win98/XP Dual-Boot
- Best Parts for a Multi-User Local LLM Server in 2026
- Best Streaming Starter Kit for New Creators in 2026
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- Free Retro Game Emulator Online: 2026 Browser Guide
- Best Sim Racing Wheel and Shifter Combo for Beginners: Logitech G920 + Thrustmaster TH8A
- Gemini Intelligence Hardware Requirements: What Google's Stack Tells Us About Local Inference
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Best Storage for a Windows 98 Retro PC: CompactFlash vs IDE-to-USB SSD Adapters
- KOORUI 27-inch 4K QD-Mini LED: A Budget HDR Gaming Monitor?
- AMD Ryzen 9 9950X Hitting 98°C While Streaming?
- Period-Correct LAN Party Build: 2002 Pentium 4 + GeForce 4 Ti + Sound Blaster Live
- Best PC Gaming Controller 2026: GameSir G7 SE vs 8BitDo Pro 2 vs Sony DualSense
- Samsung's 2026 Odyssey Lineup Adds 5K, 6K and a 360Hz 4K QD-OLED
- Best 4K Gaming Monitor in 2026: 5 Picks From Budget to Premium
- How to Build a Fully Declarative Homelab Stack
- Ryzen 5 5600G vs Ryzen 7 5700X for 1080p Gaming
- Running Local LLMs on a Raspberry Pi 4 8GB: tok/s, Quantization, and What Actually Works
- Inside the Intel 8087: Decapping a 1980 Math Coprocessor's Microcode
- RTX 3060 12GB Local LLM Guide: Which Models Actually Fit (2026)
- Building a Local AI-Agent Eval Rig After AISI's Benchmark Warning
- SATA/IDE to USB Adapters in 2026: FIDECO vs Unitek vs Vantec for Retro PC Data Recovery
- Framework RTX 5070 12GB Module: Why It's $1,199, Not $699
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090