Skip to main content
ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280
ZDE

ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280

Bottom line: The ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar single-board computers

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Backed by ZDE's warranty and support channels

Cons

  • ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

About this item Dual M.2 NVMe SSDs Supported: ZP519 PCIe to Dual M.2 HAT Key-M NVMe SSD expansion board supports the installation of two M.2 Key-M NVMe SSDs in 2230/2242/2260/2280 length, high-speed reading/writing; supports boot from NVMe SSD. Compatibility: This PCIe to Dual M.2 HAT NVMe kit is only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC. How to Power: Power the adapter directly from the PCIe FPC ribbon cable. Also, with 40pin GPIO header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board… using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. ZDE's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Dual M.2 NVMe SSDs Supported ZP519 PCIe to Dual M.2 HAT Key-M NVMe SSD expansion board supports the installation of two M.2 Key-M NVMe SSDs in 2230/2242/2260/2280 length, high-speed reading/writing; supports boot from NVMe SSD.
  • Compatibility This PCIe to Dual M.2 HAT NVMe kit is only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC.
  • How to Power Power the adapter directly from the PCIe FPC ribbon cable. Also, with 40pin GPIO header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
  • Cooling Solution The ZP519 shield supports the installation of official Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, providing excellent heatsink for Raspberry Pi 5 and SSD.
  • Practical Accessories Comes with 2pcs M2 studs for 2230/2242/2260/2280 SSD installation, no soldering required.

Full Specifications

ASINB0F299Y72Y
BrandZDE
PlatformLinux
Item Weight29.6 Grams
ManufacturerZDE
Model NumberZP519
Built-In MediaVHS
Hardware PlatformPersonal Computer
Compatible DevicesPersonal Computer
Hardware InterfacePCI Express x4
Warranty Description1 month
Hardware ConnectivityPCI Express x4

Hardware benchmark data

Ready to buy?

ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Single-Board Computers

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280
View on Amazon →