Rotating Mesh Magazine Rack,Brochure Display Stand With 30 Pockets,Commercial and Public Place Literature Rack
Bottom line: The Kroey Rotating Mesh Magazine Rack is a specs-and-price decision rather than a crowd-consensus one in the accessories category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Kroey's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Kroey Rotating Mesh Magazine Rack using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Kroey's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- DIFFERENT FROM OTHERS MODELS:The pocket style grid structure is different from other models of wire structures. Our single pocket can accommodate a stack of magazines with a thickness of up to 1.57", while the wire structure can only accommodate magazines with a thickness of 0.4",The left image provides a detailed introduction
- LARGE CAPACITY-30 POCKETS:Kroey magazine rack has 3 sides, each with 10 grid shaped pockets. The thickness of the pockets is 1.57", which can accommodate magazines of A5 and A4 width. The grid sealed pockets have a magazine carrying capacity that is 4 times more than the wire shaped grille
- 360°ROTATION:This magazine holder adopts a roller design that can rotate 360 °. Thanks to the roller design, the rotation is more effortless and does not cause any wear to the magazine rack. It can meet the needs of visitors from three sides to read magazines at the same time
- MATERIAL AND SIZE:Metal material, sturdy and Wear-resistant,and long service life. Heavy square large base, stable and non shaking.Overall height:63inch, base width:13.2",Each Pocket width and deepth:9"/7.09", Thickness of each pocket:1.57"
- MULTI SCENARIO APPLICATION:It is a display stand for greeting cards, magazines, postcards, comic books, CDs, etc. in stores, and is also an ideal display stand for periodicals, catalogs, product brochures, flyers, invitations, announcements, postcards, greeting cards, CDs, DVDs, magazines, literature and other printed documents in exhibitions, restaurants, cafes, schools, gift shops, convenience stores, libraries or other public places
Full Specifications
| Brand | Kroey |
|---|---|
| Color | black |
| Material | Iron |
| Room Type | Home Office |
| Shelf Type | Tiered Shelf |
| Style Name | Modern |
| Material Type | Iron |
| Mounting Type | Floor Mount |
| Special Feature | Revolving |
| Required Assembly | Yes |
| Additional Features | Revolving |
| Indoor Outdoor Usage | Indoor |
| Manufacturer Part Number | HJ14-YTF |
| Item Dimensions D x W x H | 13.2"D x 13.2"W x 63"H |
| Recommended Uses For Product | Books |
Ready to buy?
Rotating Mesh Magazine Rack,Brochure Display Stand With 30 Pockets,Commercial and Public Place Literature Rack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Noctua NH-U12S vs ML240L RGB: Best Cooler for a 5800X
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 3090
- Claude Opus 4.8 Tops GPT-5.5: What Runs Local on a 12GB GPU
- PebbleOS Comes to the Raspberry Pi RP2350: What the Port Means for Tinkerers
- Laguna XS.2 Lands in llama.cpp: What the Tiny Hybrid Model Means for Local Inference
- Add AI Vision to a Raspberry Pi 4 8GB with an AI Accelerator (2026)
- Build a $20 DualSense PC Adapter: The Open-Source Sony Workaround
- Ex-Sega Engineer's 'Super Realistic' CRT Emulator — What It Means for Retro Mini-Consoles
- Network-Wide Ad Blocking with Pi-hole on a Raspberry Pi 4 8GB (2026 Setup)
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Best IDE-to-USB Adapter for Retro PC Data Recovery: FIDECO vs Unitek vs Vantec
- Build a Silent Pi 4 NVMe Homelab: Cooling, VESA, SSD Boot
- CompactFlash as an IDE Boot Drive: The Definitive Win98 Storage Guide
- Mount a 90s CD-ROM on Windows 98 Without a CD Drive (2026)
- Best Storage Upgrades for Retro and Budget PC Builds in 2026
- Build a 3D-Printed Cyberdeck Music Workstation on a Raspberry Pi 4
- Raspberry Pi 5 Kit: What's Actually Worth Buying in 2025
- Best Budget Gaming Peripherals Under $100 in 2026
- Best 1440p Monitor for an RTX 3060: Matching Panel to GPU
- Best $500-600 Gaming PC Build for a Ryzen/RX 6600 Rig
- Best GPU for Ollama Under $300: Why 12GB Beats a Faster 8GB Card
- RTX 5080 vs RTX 4090: Is the Future-Proofing Worth It?
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- Raspberry Pi 5 8GB Review: Specs, Price & Use Cases (2025)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090