Hanpusen for Meta/Oculus Quest 3S Face Pad Cover with Nose Pad
Bottom line: The Hanpusen for Meta/Oculus Quest 3S Face Pad Cover with Nose Pad: Waterproof PU surface wipes clean or rinses under water for shared headset use; main trade-off: quest 3S only - explicitly does not fit Quest 3 headsets.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Waterproof PU surface wipes clean or rinses under water for shared headset use
- ✓ Ventilation holes plus nose pad cut lens fogging and light leak
- ✓ Nose pad and ergonomic shape make room for glasses wearers
- ✓ Soft foam sits closer to the lenses for a wider field of view
Cons
- ✗ Quest 3S only - explicitly does not fit Quest 3 headsets
- ✗ PU leather traps more heat than fabric during long sessions
- ✗ No warranty or return terms listed - check the product listing
- ✗ Foam thickness is fixed, so no swapping in a thinner pad for depth
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Hanpusen for Meta/Oculus Quest 3S Face Pad Cover with Nose Pad, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the vr headsets & accessories category before committing. On the listing's own facts, the case for it is "Waterproof PU surface wipes clean or rinses under water for shared headset use"; the main trade-off is "Quest 3S only - explicitly does not fit Quest 3 headsets". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Anti-sweat and Washable: Waterproof PU surface facial pad, no need special care, wipe it with wet cloth or just wash it with water can make it clean easily, which helps you keep your VR Clean and you can share your VR device with your family and friends.
- No More Fogging: Facial brace with ventilation hole design,and the added nose pads, prevent steam from rising up and obscure your vision, and provide a wider field of view and a tighter fit to enhance your VR gaming experience. This mask replacement designed for Oculus Quest 3S is also helpful for glasses players.
- Reduce Head Pressure: Updated soft VR foam face pad, less oppressive even when using VR headset for a long time and less light seepage in the meanwhile.
- Better VR View: The ergonomically designed face pad fits perfectly on different face shapes and brings you closer to the display, providing a wider field of view and a tighter fit for a more comfortable VR experience over long periods of time.
- Easy to use: The Upgraded replacement facial interface Set compatible with Oculus Quest 3S Accessories.Easy to install and use.No folds after installation like others that perfect fit to face,can reduce head pressure.
Full Specifications
| Brand | Hanpusen |
|---|---|
| Color | Black |
| Platform | Meta Quest |
| Model Name | Closed Facial Interface |
| Resolution | 1832 x 1920 per eye |
| Unit Count | 1 Count |
| Display Type | OLED |
| Model Number | Closed Facial Interface |
| Field Of View | 110 degrees |
| Built-In Media | Face Cover |
| Controller Type | Motion-sensing controller |
| Mfr Part Number | Q3S-PU |
| Special Feature | Air-Circulation Design, Nose Pad, Soft Foam Cushion Pad, Ergonomic Design, Improved Visual Experience |
| Sensor Technology | Accelerometer Gyroscope Magnetometer |
| Compatible Devices | Oculus Quest 3S |
| Additional Features | Air-Circulation Design, Nose Pad, Soft Foam Cushion Pad, Ergonomic Design, Improved Visual Experience |
| Included Components | Face Cover |
| Reduce Head Pressure | Updated soft VR foam face pad, less oppressive even when using VR headset for a long time and less light seepage in the meanwhile. |
| Warranty Description | 1 |
| Age Range Description | Adult |
| Full listing title | for Meta/Oculus Quest 3S Face Pad Cover with Nose Pad | Soft PU Leather Foam Cushion Pad Air-Circulation Design Facial Interface Accessories Replacement (Not Fit Quest 3) |
Ready to buy?
for Meta/Oculus Quest 3S Face Pad Cover with Nose Pad | Soft PU Leather Foam Cushion Pad Air-Circulation Design Facial Interface Accessories Replacement (Not Fit Quest 3) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- ComfyUI on an RTX 3060 12GB: Real Image-Gen Throughput in 2026
- Hugging Face Says an AI Agent Breached Its Infrastructure
- 42 LLMs Tested for Apocalypse Compliance: What Data Shows
- Replace a Dying IDE Drive With CompactFlash in a Win98 Retro PC
- Intel Core Ultra 7 270K Plus: Dual-Channel Memory Scaling Tested
- Claude Code Cut 80% of Its System Prompt: What Changes for Local Agent Rigs
- GPT-5.6 Sol Ships Under Government Access OpenAI Calls Unsustainable
- RetroPie Handheld Build Guide 2026: Hardware & Setup
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- Qualcomm Enters the Data-Center Market With Its Own AI Processor
- Boot Windows 98 from CompactFlash: A Silent, Reliable CF-to-IDE Build
- Best DualSense and PC-Compatible Controller (2026)
- How to run Llama 3.1 70B on Apple M4 Pro
- This Open-Source KVM Runs a Pentium 4 Instead of a Raspberry Pi
- Intel Arc vs NVIDIA 2026: Local LLM Tokens per Dollar
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 120mm vs 240mm AIO
- Dual RTX 3060 12GB vs RTX 3090 24GB for Qwen2.5 32B (2026)
- Intel Arc Pro B60 24GB: The Cheapest 24GB Inference Card Yet?
- Qwen3 0.6B: Raspberry Pi 4 8GB vs Ryzen 5 5600G for Tiny-Model Hosts (2026)
- Best Gaming Mouse Pads for FPS and MOBA in 2026
- Get Up to $900 Off a Dell PC: Gaming & Everyday Deals
- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Logitech G920 vs HORI Racing Wheel: Best Beginner Sim Setup (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090