Gearshift & Handbrake Holder, Compatible with Playseat Trophy Racing Seats
Bottom line: The Banpingo Gearshift & Handbrake Holder is a specs-and-price decision rather than a crowd-consensus one in the sim racing category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Banpingo Gearshift & Handbrake Holder, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the sim racing category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatible with Playseat Trophy Models: Designed for Playseat Trophy seat frames, including the Logitech G Edition. Mounts directly to the frame for an organized sim racing setup. Racing seat, shifter, and handbrake are not included.
- Flexible Shifter and Handbrake Setup: The pre-drilled plate supports a shifter-only setup or a combined shifter and handbrake configuration, depending on device size and mounting-hole pattern. Check fit and installation space before purchase
- Left- or Right-Side Installation: Install the holder on either side of the racing seat to match your preferred driving position, cockpit layout, and operating habits
- Stainless-Steel Construction: Made of stainless steel with a sandblasted surface and an approximately 0.2-inch mounting plate. The reinforced structure provides reliable support for compatible sim racing controls during normal use
- Installation Hardware Included: Includes the gearshift and handbrake holder, mounting hardware, Allen key, and instruction manual.
Full Specifications
| Brand | Banpingo |
|---|---|
| Color | black |
| Model Name | Gearshift & Handbrake Holder |
| Model Number | TH-4500 |
| Power Source | Wireless |
| Controller Type | Gear Shifter |
| Item Dimensions | 10 x 2 x 2.7 inches |
| Hardware Platform | Not Machine Specific |
| Compatible Devices | Racing Shifter, Sim Racing Handbrake |
| Additional Features | Multiuse |
| Connectivity Technology | USB |
| Manufacturer Part Number | 3601 |
| Installation Hardware Included | Includes the gearshift and handbrake holder, mounting hardware, Allen key, and instruction manual. |
| Left- or Right-Side Installation | Install the holder on either side of the racing seat to match your preferred driving position, cockpit layout, and operating habits |
Ready to buy?
Gearshift & Handbrake Holder, Compatible with Playseat Trophy Racing Seats is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Sim Racing
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Old RAM Identification: Decode Part Numbers & Specs
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- HyperX QuadCast 2 vs Blue Yeti for Streaming in an Untreated Room
- Voodoo 5 6000 FSAA: The Feature That Never Engaged
- Best Streaming Setup Bundle in 2026: 5 Picks From Mic to Stream Deck
- oQ vs Q4_K/Q6_K vs MXFP4 vs UD-MLX: Which Quantization Format Should You Pick in 2026?
- Best Controller for Raspberry Pi Retro Gaming and Emulation in 2026
- Cerebras Says It's Running GPT-5.5 Internally — What It Means for Local LLM Boxes
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- Google's Tiny Gemma 3 Board: What a $0 SBC Gemma Demo Means for Local AI
- Benchmarking Open LLMs for Tool-Use: RTX 3060 12GB vs Ryzen 5800X CPU-Only
- Ryzen 7 5800X vs 5800X3D for 1440p Gaming: Which Should You Buy?
- gpt-oss 20B vs Phi-4 14B on a 12 GB GPU: Which One Actually Fits?
- GLM-5.2's 37k-Token Reasoning Outputs and What They Mean for Local Rigs
- Build a 2001 GeForce 3 Windows 98 Gaming PC in 2026: Parts and Setup
- Best Budget Gaming Audio for 2026: Headsets, Earbuds, Mics and DACs
- Best SATA SSDs for Gaming and Retro PC Builds in 2026
- Adafruit Ships a Triple LED Matrix Bonnet for the Raspberry Pi
- Best Streaming Gear for Twitch Beginners in 2026
- Best PC Gaming Upgrades Under $30 in 2026
- Hy3-Preview vs DeepSeek V4 Flash: Where the New Open-Weights Model Actually Lands
- Cyberdeck Raspberry Pi 4/5 Mini Music Workstation Build Guide
- Best USB Microphone for Streaming in 2026
- Sega Genesis Mini vs SNES Classic: Which Plug-and-Play Console Holds Up in 2026?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090