iUniker 27W PD USB-C Switch Power Supply for Raspberry Pi 5
Bottom line: The iUniker 27W PD USB-C Switch Power Supply for Raspberry Pi 5 ($12.19 on Amazon as of 2026-10-22 10:29 UTC): 5.1V/5A (27W) USB-C PD output built for Raspberry Pi 5 2GB, 4GB, 8GB and 16GB; main trade-off: 120mm cable is very short, so the Pi has to sit close to the outlet.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-22. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 5.1V/5A (27W) USB-C PD output built for Raspberry Pi 5 2GB, 4GB, 8GB and 16GB
- ✓ Inline LED power switch lets you power-cycle the Pi without unplugging it
- ✓ GaN design keeps the adapter compact and running cool, per iUniker
- ✓ Over-voltage, over-current and short-circuit protection built in
- ✓ ETL listed, with universal 100-240V 50/60Hz AC input
Cons
- ✗ 120mm cable is very short, so the Pi has to sit close to the outlet
- ✗ US plug only; outside North America you need a plug adapter
- ✗ 9V/12V/15V PD modes go unused by the Pi 5, which runs at 5.1V
- ✗ Single USB-C output; it cannot power a Pi and a second device at once
Manufacturer description
About this item 【Compatibility】Compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB, Raspberry Pi 5 Power Supply USB-C PD 27W GaN Power Adapter 【Powered by GaN】Powered by GaN Technology: GaN technology makes our power supply smaller without sacrificing a drop of power and work with low temp and more stable 【Input】100 – 240V AC, 50/60HZ 0.8A Max; Connector: USB-C; Cable: 120mm 18AWG 【Output】5.1V/5A, 9V/3A, 12V/2.25A, 15V/1.8A 【Protection】With over voltage, over current short circuit protection 【LED Switch】Integrated with an LED indicator power switch, specifically designed for Raspberry Pi 5…
SpecPicks Verdict
SpecPicks scored iUniker 27W PD USB-C Switch Power Supply for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. iUniker's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Compatibility】Compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB, Raspberry Pi 5 Power Supply USB-C PD 27W GaN Power Adapter
- 【Powered by GaN】Powered by GaN Technology GaN technology makes our power supply smaller without sacrificing a drop of power and work with low temp and more stable
- 【Input】100 – 240V AC, 50/60HZ 0.8A Max; Connector USB-C; Cable 120mm 18AWG
- 【Output】5.1V/5A, 9V/3A, 12V/2.25A, 15V/1.8A
- 【Protection】With over voltage, over current short circuit protection
- 【LED Switch】Integrated with an LED indicator power switch, specifically designed for Raspberry Pi 5, featuring near-zero voltage drop to ensure stable operation and eliminate low voltage concerns.
Full Specifications
| ASIN | B0FJLDFMF7 |
|---|---|
| Brand | iUniker |
| Color | Black |
| Wattage | 27 watts |
| Amperage | 5 Amps |
| Portable | Yes |
| Power Plug | Type C |
| Unit Count | 1.0 Count |
| Item Weight | 110 Grams |
| Manufacturer | Shenzhen Sunshine Technological Co., Ltd. |
| Model Number | XSL·GaN-27W USB-C Power Supply US |
| Power Source | Corded Electric |
| Input Voltage | 110 Volts |
| Built-In Media | Cable |
| Connector Type | USB Type C |
| Output Current | 5 Amps |
| Output Voltage | 5.1 Volts |
| Number of Items | 1 |
| Special Feature | Fast Charging, Lightweight Design, Multi Device Charging, Short Circuit Protection, Travel |
| Compatible Devices | Raspberry Pi 5 |
| Full listing title | iUniker 27W PD USB-C Switch Power Supply for Raspberry Pi 5, 5.1V 5A 27W GaN PD Power Supply for Raspberry Pi 5 16GB/8GB/4GB/2GB (ETL Listed) |
Ready to buy?
iUniker 27W PD USB-C Switch Power Supply for Raspberry Pi 5, 5.1V 5A 27W GaN PD Power Supply for Raspberry Pi 5 16GB/8GB/4GB/2GB (ETL Listed) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-22. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3.6-35B-A3B VRAM Optimization: Why Bigger Quants Win
- Open-WebUI on a Raspberry Pi 4: A Front-End for Your RTX 3060 LLM Rig
- Ollama on a 12GB RTX 3060: Best Models and tok/s in 2026
- Ryzen 7 5800X + RTX 3060 12GB: Best 1440p AM4 Build
- 16GB vs 32GB RAM for Windows 11 Gaming in 2026
- Best Budget Streaming Starter Kit for Twitch & YouTube in 2026
- Linux vs Windows 11: AMD Ryzen 9 9950X3D Performance
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- Using LLMs to Install Vintage GPU Drivers on Win98 and WinXP: A Field Report from Our Retro-Agent Fleet
- Build a Raspberry Pi Zero W Cyberdeck in 2026: BOM + Wiring Guide
- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- Homebrew Hardware Mod Gives the NES a Graphics Upgrade
- Best SSD for PS5 Console Storage Expansion in 2026
- Linux 7.3: 'Flatten the Pick' Scheduler Gains for Gaming
- From AWE32 to BlasterX G6: The Sound Blaster Lineage for Modern Retro Rigs
- llama.cpp vs vLLM for Single-User Local Chat on a 12GB GPU (2026)
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Best 4K Monitor for PS5 and Xbox Series X Console Gaming in 2026
- Troubleshooting 3dfx Voodoo Cards on Modern AGP Builds: The 2026 Recovery Playbook
- Should You Overprovision vCPU Per VM in a Homelab?
- RTX 4090 AI TOPS in 2026: What the Number Means
- Best GPU for 1080p Esports in 2026: Why the RTX 3060 12GB Still Delivers
- What a $15 Raspberry Pi Zero W Can Still Do in 2026
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090