Skip to main content
LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | Right Angle | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 20cm (Total Length: 24cm)
LINKUP

LINKUP PCIE 5.0 Riser Cable

Bottom line: The LINKUP PCIE 5.0 Riser Cable ($50.37 on Amazon as of 2026-10-06): Full PCIe 5.0 x16 bandwidth at 128GB/s for RTX 5090 and RX 9070 vertical mounts; main trade-off: 20cm span (24cm total) may be too short for tall full-tower mounts.

$50.37

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $50.37 Compare to similar expansion cards

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Full PCIe 5.0 x16 bandwidth at 128GB/s for RTX 5090 and RX 9070 vertical mounts
  • ✓ Multilayer shielding cuts crosstalk and EMI to hold GPU clocks steady under load
  • ✓ Backward-compatible with PCIe 4.0, so it fits current Gen4 builds too
  • ✓ Right-angle connector routes cleanly in SFF/ITX sandwich and open-bench cases
  • ✓ Validated on ASUS WS WRX80SE and WRX90E Gen5 workstation boards

Cons

  • ✗ 20cm span (24cm total) may be too short for tall full-tower mounts
  • ✗ Requires a compatible vertical GPU mount bracket, sold separately
  • ✗ Tight bends near the latch need standoffs or support in cramped ITX routes

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored LINKUP PCIE 5.0 Riser Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. LINKUP's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
  • Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
  • Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
  • Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
  • Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.

Full Specifications

BrandLINKUP
ColorBlack
ModelAVA5
Set NameNo Bracket
Frequency128000000000 Hz
Cable TypeRiser Cable
Unit Count1.0 Count
Item Length24 Centimeters
Part NumberAG-P5-33SR-020BK-v4
ConnectivityWiFi
CompatibilityPC
Connector TypePcie-cem
Number of Pins22
Maximum Voltage1100 Millivolts
Number of Items1
Special FeatureData Transfer, High Speed
Connector GenderMale-to-Male
Data Transfer Rate128 Gigabytes Per Second
Indoor Outdoor UsageIndoor
Compatible Phone ModelsNo Compatible Phone Models
Full listing titleLINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | Right Angle | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 20cm (Total Length: 24cm)

Ready to buy?

LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | Right Angle | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 20cm (Total Length: 24cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $50.37

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Expansion Cards

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | Right Angle | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 20cm (Total Length: 24cm)
$50.37
View on Amazon →