LINKUP PCIE 5.0 Riser Cable
Bottom line: The LINKUP PCIE 5.0 Riser Cable: Full PCIe 5.0 x16 bandwidth at 128GB/s, ready for RTX 5090 and RX 9070 cards; main trade-off: 14cm span can be too short for some full-tower vertical mounts.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Full PCIe 5.0 x16 bandwidth at 128GB/s, ready for RTX 5090 and RX 9070 cards
- ✓ Multilayer shielding suppresses crosstalk and EMI to hold steady Gen5 clocks
- ✓ Backward-compatible with PCIe 4.0; validated on ASUS WRX80SE and WRX90E boards
- ✓ Double-reverse layout fits SFF/ITX sandwich cases and vertical GPU mounts
Cons
- ✗ 14cm span can be too short for some full-tower vertical mounts
- ✗ Requires a separate vertical GPU bracket, which is not included
- ✗ Tight bends risk signal loss without careful routing and support
- ✗ Seven connector orientations make picking the right variant confusing
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for LINKUP PCIE 5.0 Riser Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "Full PCIe 5.0 x16 bandwidth at 128GB/s, ready for RTX 5090 and RX 9070 cards"; the main trade-off is "14cm span can be too short for some full-tower vertical mounts". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
- Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
- Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
- Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
- Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.
Full Specifications
| Brand | LINKUP |
|---|---|
| Color | Black |
| Model | AVA5 |
| Frequency | 128 GHz |
| Cable Type | Riser Cable |
| Unit Count | 1 Count |
| Item Length | 14 centimeters |
| Part Number | AG-P5-33VV-014BK-v3 |
| Connectivity | WiFi |
| Compatibility | PC |
| Connector Type | Pcie-cem |
| Maximum Voltage | 1100 Millivolts |
| Number of Items | 1 |
| Special Feature | High Speed |
| Connector Gender | Male-to-Female |
| Specification Met | Pci-e 5.0 |
| Compatible Devices | SSUPD Meshlicious, SSUPD Meshroom S (Mini-ITX) |
| Data Transfer Rate | 128 gigabytes_per_second |
| Indoor Outdoor Usage | Indoor |
| Compatible Phone Models | No Compatible Phone Models |
| Full listing title | LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | ITX Double Reverse | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 14cm (Total Length: 16.2cm) |
Ready to buy?
LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | ITX Double Reverse | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 14cm (Total Length: 16.2cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- Can You Build an $800 Gaming PC in 2026? Parts + Cost
- AMD Ryzen AI Mini PC vs a DIY RTX 3060 Build for Local LLMs
- Forza Horizon 6 on Steam Deck: Best Settings, Dock & Storage in 2026
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
- Ryzen 7 5800X + RTX 3060 12GB: Best 1440p AM4 Build
- Best Budget 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI Mini-LED
- Best Raspberry Pi Alternatives 2026: 5 SBCs After the Price Hikes
- Best Streaming Gear for a $500 Twitch Starter Setup in 2026
- Intel Arc Pro B70 (BMG-G31) Posts Strong Linux Gaming Numbers — How It Stacks Up Against an RTX 3060
- PCIe Gen2/Gen3 1:2 Analog MUX: Practical Maker Implementation
- Qualcomm Enters the Data-Center Market With Its Own AI Processor
- Gemma 4 31B on a 12GB RTX 3060: Quantization, VRAM, and Real tok/s
- Kimi K3 Open Weights: What It Takes to Run It Locally
- HiDream-O1-Image Debuts as Top Open-Weights Text-to-Image Model
- Best Retro Gaming Console to Buy in 2026
- Intel Bartlett Lake vs i9-13900K: More Cores, Fewer Frames
- Best Plug-and-Play Retro Gaming Consoles in 2026: 5 Picks
- RX 7900 XTX 24GB vs RTX 4080 16GB for Local LLM Inference (2026)
- Qwen 0.8B AI Detectors: Fine-Tuned on Pangram-Style Data
- How to run Llama 3.1 70B on AMD Radeon RX 7900 XTX
- Best SSD for Gaming and Everyday Builds in 2026
- Best Budget AM4 Build for Local LLM Inference in 2026
- MTP (Multi-Token Prediction): 2x Faster Token Generation on AMD Strix Halo & Radeon 9700 AI Pro
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090