Geekworm X1207 2-in-1 PoE+ & UPS HAT for Raspberry Pi 5 (2/4/8/16GB)
Bottom line: The Geekworm X1207 2-in-1 PoE+ & UPS HAT for Raspberry Pi 5 is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category, priced around $55.00 on Amazon as of 2026-10-07. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by Geekworm's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
About this item 2-in-1 PoE+ & UPS HAT: Specifically designed for Raspberry Pi 5 (2/4/8/16GB). Combines Power over Ethernet (PoE+) and Uninterruptible Power Supply (UPS) in one compact HAT; Model: X1207 Dual Power and Easy Setup: Complies with IEEE 802.3af and IEEE 802.3at (PoE+) standards. Power via 35-57VDC PoE or the X1207 5V 5A USB-C port; Detailed hardware and software guides are available on the Geekworm Wiki (search: X1207) for a hassle-free installation Powerful 5.1V 5A Output: Supports a maximum 5.1V 5A power output to ensure stable performance for Raspberry Pi 5 under heavy Smart…
SpecPicks Verdict
SpecPicks scored Geekworm X1207 2-in-1 PoE+ & UPS HAT for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Geekworm's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 2-in-1 PoE+ & UPS HAT Specifically designed for Raspberry Pi 5 (2/4/8/16GB). Combines Power over Ethernet (PoE+) and Uninterruptible Power Supply (UPS) in one compact HAT; Model X1207
- Dual Power and Easy Setup Complies with IEEE 802.3af and IEEE 802.3at (PoE+) standards. Power via 35-57VDC PoE or the X1207 5V 5A USB-C port; Detailed hardware and software guides are available on the Geekworm Wiki (search X1207) for a hassle-free installation
- Powerful 5.1V 5A Output Supports a maximum 5.1V 5A power output to ensure stable performance for Raspberry Pi 5 under heavy
- Smart Power Management Features intelligent power management, including auto power on, safe shutdown, power loss and power adapter failure detection and a physical on-board power button for convenient manual control
- Packing List Includes 1 x X1207 Expansion Board, 4 x M2.5x13mm Spacers, 8 x M2.5x5mm Screws, 1 x Pogo Pin; Note Raspberry Pi 5, Power Supply, Active Cooler, and Battery are NOT included
Full Specifications
| ASIN | B0G2BKPS5S |
|---|---|
| Brand | Geekworm |
| Color | Black |
| Voltage | 5 Volts |
| Wattage | 25 watts |
| Amperage | 5 Amps |
| Material | Plastic |
| Unit Count | 1.0 Count |
| Form Factor | Compact |
| Manufacturer | Geekworm |
| Model Number | X1207 |
| Input Voltage | 57 Volts (DC) |
| Maximum Power | 25 Watts |
| Built-In Media | 1 x 1207 V1.2 UPS board, 4 x M2.5x13mm F/F Spacers, 8 x M2.5x5mm Screws, 1 x Pogo pin(For connecting to the Pi 5 PSW through hole) |
| Connector Type | USB-C |
| Output Current | 5 Amps |
| Output Voltage | 5.1 Volts |
| Output Wattage | 25 Watts |
| Mfr Part Number | TB-2025-62 |
| Number of Outlets | 1 |
| Full listing title | Geekworm X1207 2-in-1 PoE+ & UPS HAT for Raspberry Pi 5 (2/4/8/16GB), IEEE 802.3at 5V 5A Output, Supports Auto Power On, Safe Shutdown and Power Loss Detection |
Ready to buy?
Geekworm X1207 2-in-1 PoE+ & UPS HAT for Raspberry Pi 5 (2/4/8/16GB), IEEE 802.3at 5V 5A Output, Supports Auto Power On, Safe Shutdown and Power Loss Detection is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel llm-scaler-vllm PV 1.4 Adds Arc Pro B70 Support: What Local-LLM Builders Get
- Gemma 4 Stealth Update Fixes Tool Calling: What Changes Locally
- 8BitDo Pro 2 on Win98 SE and WinXP: Mapping a Modern Bluetooth Pad to DOSBox, Glide Games, and…
- Devin Maker Cognition Hits $26B: What a Capital-Backed Coding Agent Race Means for Local-LLM Builders
- 42 LLMs Tested for Apocalypse Compliance: What Data Shows
- RTX 5090 vs RX 9070 XT: Specs, Gaming & AI Compared
- Troubleshooting Corsair 12V-2x6 Cable Issues on RTX-Class GPUs (2026)
- Best 1440p 240Hz Gaming Monitors in 2026
- Best 4K Monitor Under $400 for Console & PC Gaming 2026: SANSUI vs KOORUI vs ASUS TUF
- Gunnir Arc B580 vs RTX 5090D on DeepSeek: The Budget AI-Rig Upset Explained
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- Best CPU Cooler for Ryzen 7 5800X Overclocking (2026)
- Asus ROG Harpe II Extreme Lands With a 65K-DPI Sensor
- Voodoo 5 6000 Verdict: What the Lab Established and Tests Next
- Load Retro Games onto a Win98 IDE PC with a CompactFlash Adapter (2026)
- CUDA 13.3 and the RTX 3060: What Changes for Local LLM Inference
- FIDECO vs Unitek SATA/IDE-to-USB Adapters: Imaging and Rescuing Vintage Drives in 2026
- 007: First Light Is Great on Steam Deck
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
- Best Budget 4K Gaming Monitor 2026: SANSUI 27" vs KOORUI QD-Mini LED vs ASUS TUF
- Do You Need a USB Sound Card for Gaming? Recon 50 + Sound Blaster G6 (2026)
- Best CPU Cooler for a Ryzen 5800X Under PBO + Manual Overclock in 2026
- Installing 3dfx Voodoo Glide Drivers on Windows 98 in 2026
- Intel Arc Pro B60 Gaming Performance: 2025 Benchmarks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090