ELECROW ESP32 Display 800×480, 4.3" HMI Advanced ESP32 IPS Touch Display
Bottom line: Per its Amazon listing, the ELECROW ESP32 Display 800×480 ($43.69 on Amazon as of 2026-11-20 11:18 UTC): supports 2.4 GHz WiFi (802.11a/b/g/n) and Bluetooth 5.0 (BLE); built in 512KB SRAM, 8M PSRAM, and 16M Flash.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Supports 2.4 GHz WiFi (802.11a/b/g/n) and Bluetooth 5.0 (BLE)
- ✓ Built in 512KB SRAM, 8M PSRAM, and 16M Flash
- ✓ Backed by ELECROW's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ELECROW ESP32 Display 800×480, so this read rests on the manufacturer's listed specs and the current price in the processors category (how we evaluate). Compare with similarly-priced alternatives in the processors category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for processors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- High-Performance Processor: ESP32 display is equipped with ESP32-S3 main processor and Xtensa 32-bit LX7 dual-core processor (up to 240 MHz). Supports 2.4 GHz WiFi (802.11a/b/g/n) and Bluetooth 5.0 (BLE). Built in 512KB SRAM, 8M PSRAM, and 16M Flash
- Supports AI Speech Interaction: ESP32 screen enables intelligent voice command interaction, voice recognition, and speech synthesis through its built-in microphone and speaker, allowing seamless conversations with a smart assistant to obtain information
- 4.3-Inch ESP32 Screen: ESP32 HMI display is equipped with a 4.3-inch IPS capacitive touch screen featuring 800×480 resolution and driven by ST7262, and offers wide 178° viewing angle and high color fidelity for rich visual experience
- Easy Development & Rich Interfaces: ESP32 touchscreen is compatible with Arduino IDE, Espressif IDF, PlatformIO and LVGL graphics library. Includes SD card slot, USB port, UART, I2C, battery socket, speaker port, RTC for diverse embedded and IoT applications
- Modular Wireless Connectivity: Support multiple communication protocols by replacing different wireless modules, such as Zigbee, Matter, Thread, LoRa, nRF2401, Wi-Fi HaLow, Wi-Fi 6, etc. One screen can meet various wireless communication requirements
- Professional & Reliable: If you have any questions or issues, feel free to get back to us. We offer expert technical support and 16 x ESP32 Display Tutorials: bit.ly/4i1CIq1
Full Specifications
| Brand | ELECROW |
|---|---|
| Color | black |
| Resolution | 800x480 |
| Unit Count | 1 Count |
| Screen Size | 4.3 inches |
| Aspect Ratio | 16:10 |
| Connectivity | Bluetooth, USB, WiFi, 2.4GHz |
| Display Type | ips |
| Model Number | 4.3" Advanced ESP32 Display |
| Screen Finish | Glossy |
| Viewing Angle | 178 degrees |
| Connection Type | Wireless |
| Processor Count | 1 |
| Total Usb Ports | 1 |
| Native Resolution | 800 x 480 |
| Compatible Devices | Monitor |
| Display Technology | IPS |
| Additional Features | Touchscreen |
| Included Components | 1x CrowPanel Advance ESP32 Display-4.3 inch, 1x Crowtail/Grove 4pin DuPont cable, 1x USB-A to Type-C Cable |
| Total USB 3.0 Ports | 1 |
Benchmark data for other processors
Ready to buy?
ELECROW ESP32 Display 800×480, 4.3" HMI Advanced ESP32 IPS Touch Display is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Anthropic: AI Builds Working Exploits in Hours, Not Weeks
- RTX 5090 vs RX 9070 XT: Specs, Gaming & AI Compared
- Revive a Dead Payphone with a Raspberry Pi Zero 2 W: Full Build Walkthrough
- Building a DualSense PC Adapter with a Raspberry Pi for $20 (2026)
- Best Raspberry Pi 4 8GB Retro Emulation Setup in 2026
- Raspberry Pi 4 8GB as a Local LLM Box: What Models Actually Run?
- Best Raspberry Pi Alternatives 2026: 5 SBCs After the Price Hikes
- Ryzen 7 5800X vs Core i7-9700K for 1080p Esports in 2026
- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
- Ryzen 7 9800X3D Hits Record-Low Price — What It Means for AM4 Upgraders
- Gemini 3.5 Live Translate Goes Cloud-First — The Local, Private Path on a Raspberry Pi
- Run Qwen 3.6 27B Locally: VRAM, Quant & tok/s on a 12GB RTX 3060
- Can a 12GB RTX 3060 Still Run 2026's Local LLMs?
- 48GB DDR5 or 12GB VRAM? What Actually Speeds Up Local LLMs
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- BOSGAME VTA-439: A Linux-Friendly Ryzen AI Mini PC
- Steam Deck OLED vs ROG Xbox Ally X: 2026 Comparison
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- Intel Arc Pro B60 24GB: AI Workstation GPU Guide 2025
- Kimi K2.7 Code Is 12x Cheaper Than GPT-5.5 — Run It Local?
- GPT-5.6 Sol Matches Fable 5 at 1/3 Cost: Local-Rig Fallout
- NVIDIA Cosmos 3 vs Ideogram 4.0: Which Open Image Model to Run on 12GB
- 2026 Homelab Stack: OPNsense + Proxmox + TrueNAS + 10GbE
- Best SSDs for a Raspberry Pi homelab NAS in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090