Skip to main content
Soldering Tip Cleaning Kit | Include Flux Paste, Tip Tinner, Solder Wick, Iron Tips, Soldering Iron Tips Cleaner, Cleaning Sponge for Electronics Repair
Ceoighe

Ceoighe Soldering Tip Cleaning Kit

Bottom line: The Ceoighe Soldering Tip Cleaning Kit is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Also on eBay → Compare to similar tools & maintenance

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Backed by Ceoighe's warranty and support channels

Cons

  • ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

Package Contentsbrass cleaning wire x 1solder iron tip x 5cleaning sponge x 5flux paste x 2tip tinner cleaner x 1solder wick x 2flux applicator needle x 4

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Ceoighe Soldering Tip Cleaning Kit using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. Ceoighe's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 6 in 1 Cleaning Kit: This is a great set for the money, you get 1 soldering iron tip cleaner, 4 solder iron tip, 5 solder sponge, 2 soldering flux,1 tip tinner cleaner, 2 solder wick and 4 flux applicator needle, which is a must have for someone who is starting out soldering and wants to have great looking and strong connections
  • 2 Pack Solder Flux: To remove the oxide layer on the welding surface, lead free, halogen free, non corrosive, good flow ability, no need for post cleaning
  • Brass Cleaning Wire: As a tool for cleaning the tip of a soldering iron, it is applied to remove oxide layers and solder deposits on the tip, no water,does not reduce the tip temperature
  • 2 Pack No Clean Desoldering Wick: Remove excess solder from solder joints or circuit board pads. Made of pure oxygen free copper wire, 2.5mm wide and 19.7 feet long in total. No cleaning, low residue, making it easy to correct errors on small PCB boards
  • Tip Tinner Cleaner: Remove the oxides on the surface of the soldering iron tip to restore its brightness, and at the same time can be re tinned to enhance the soldering iron tip's ability to be tinned, sustains heat transfer so that the iron tip can continue to melt solder
  • Cleaning sponge: use for daily wiping and cleaning of soldering iron tips during the welding process, usually resistant to high temperatures

Full Specifications

BrandCeoighe
Part Number‎IA-Ceoighe-0509
Cleaning spongeuse for daily wiping and cleaning of soldering iron tips during the welding process, usually resistant to high temperatures
2 Pack Solder FluxTo remove the oxide layer on the welding surface, lead free, halogen free, non corrosive, good flow ability, no need for post cleaning
Included Components‎brass cleaning wire x 1, tip tinner cleaner x 1, cleaning sponge x 5, flux applicator needle x 4, solder flux x 2, solder iron tip x 4, solder wick x 2
Item Package Quantity‎1
5 Pcs Soldering SpongeRemove solder residue and keep PCB components clean. 56mm*56*1mm before immersion, 64mm*64mm*6mm after immersion
Full listing titleSoldering Tip Cleaning Kit | Include Flux Paste, Tip Tinner, Solder Wick, Iron Tips, Soldering Iron Tips Cleaner, Cleaning Sponge for Electronics Repair

Ready to buy?

Soldering Tip Cleaning Kit | Include Flux Paste, Tip Tinner, Solder Wick, Iron Tips, Soldering Iron Tips Cleaner, Cleaning Sponge for Electronics Repair is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Soldering Tip Cleaning Kit | Include Flux Paste, Tip Tinner, Solder Wick, Iron Tips, Soldering Iron Tips Cleaner, Cleaning Sponge for Electronics Repair
View on Amazon →