Rosewill ATX Mid Tower Gaming Computer PC Case (RWGC1)
Bottom line: The Rosewill ATX Mid Tower Gaming Computer PC Case (RWGC1) is an ATX mid-tower case with a mesh front panel, a tempered-glass side panel and 4 x 120mm fans pre-installed; it fits graphics cards up to 340mm long, a 360mm radiator and CPU coolers up to 160mm tall (manufacturer spec), priced around $59.99 on Amazon as of 2026-10-21 16:13 UTC.
Compared with: the Cooler Master Elite 301 Lite Micro-ATX High…, $59.99 on Amazon as of , and the GAMDIAS ATX Mid Tower Gaming Computer PC Case…, $59.99 on Amazon as of (prices may vary).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Complete build that uses this part: Can You Build an $800 Gaming PC in 2026? Parts + Cost (Case) — see the full parts list for the rest of the build.
This part is in Can You Build an $800 Gaming PC in 2026? Parts + Cost: $917.68 for 7 parts, including this part, at Amazon prices checked or later (price may vary). 🛒 Add the full build (7 parts) to Amazon cart
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 4 x 120mm fans pre-installed, so a basic intake/exhaust setup needs no extra fans
- ✓ Fits graphics cards up to 340mm long, a 360mm radiator and CPU air coolers up to 160mm tall (manufacturer spec)
- ✓ Mesh front panel for intake airflow, with a tempered-glass side panel
- ✓ Room for up to 6 fans
Cons
- ✗ 340mm GPU clearance rules out some of the longest triple-fan cards, a few of which run past 350mm; check your card's length
- ✗ 160mm CPU-cooler clearance is short of the tallest tower air coolers (the Noctua NH-D15 is 165mm)
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Rosewill ATX Mid Tower Gaming Computer PC Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Rosewill's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Mesh Front Panel with Built-In Fans - sports an airflow-focused mesh front panel equipped with 4 PWM fans to provide superior air intake
- Stylish Gaming PC Case with Side Tempered Glass - The computer case showcases the inner beauty of your gaming pc system with a full-sized tempered glass cover with tool-free installation for ease of access
- Excellent Airflow with 4 x Built-in PWM Fans - The mid tower case is well equipped with 4 built-in 120mm PWM fans displayed in full by the mesh front panel and the tempered glass side panel
- Modern Design with Mesh Front - GC series gaming pc cases sport an airflow-focused mesh front panel with a sleek stealth black design to provide aesthetics and excellent airflow intake
- Great Expandability for Your Gaming Rig With 2x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5" HDD Tray, USB 3.0 x1, USB 2.0 x 2, HD Audio x 1, LED Control x 1
- Furthermore, it supports different Motherboard from ATX, Micro-ATX, Mini-ITX . 7 PCIE slots allow you to fully utilize your motherboard
Full Specifications
| Full listing title | Rosewill ATX Mid Tower Gaming Computer PC Case, Tempered Glass, Built-in 4 x 120mm PWM Fans, Front Airflow Mesh, Up to 6 x120mm Fans, 340mm GPU/VGA, 360mm AIO/Radiator, 160mm CPU Cooler - RWGC1 |
|---|
The ranked shortlist for this category: Best PC Cases for Building in 2026.
Ready to buy?
Rosewill ATX Mid Tower Gaming Computer PC Case, Tempered Glass, Built-in 4 x 120mm PWM Fans, Front Airflow Mesh, Up to 6 x120mm Fans, 340mm GPU/VGA, 360mm AIO/Radiator, 160mm CPU Cooler - RWGC1 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this PC Case.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Leanstral 1.5 on an RTX 3060 12GB: Local Math + Bug-Finding Benchmarks
- NVIDIA RTX PRO 6000 Blackwell vs RTX A6000: Is 96 GB Worth $4,000 More?
- Build a Sub-$60 Air Quality Monitor on a Raspberry Pi 4 (CO₂, PM2.5, VOC)
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- Best GPU for 1440p Gaming Under $300 in 2026
- Prime Intellect Raises $130M to Help Enterprises Build Their Own AI Agents
- Samsung 27" 1440p 240Hz Gaming Monitor Drops to $169 in 2026 Deal
- Is the RTX 3060 12GB Still a Good 1080p Gaming GPU in 2026?
- Raspberry Pi 4 as a SimHub Dash for a Logitech G29 Rig
- How to run Llama 3.1 70B on Apple M4
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- Best SSD for PS5 and Console-PC Hybrid Setups in 2026
- Best Fight Stick and Pad for Fighting Games on PC (2026)
- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- Best USB Microphone for Streaming Under $150 in 2026
- Modern CRT Monitor for Retro Gaming: The 2025 Reality Check
- Intel Arc B580 LLM Inference: 12GB Battlemage Benchmarks
- Windows XP Gaming Laptops in 2026: A Realistic Buying Guide
- Audigy 2 ZS Won't Detect in Win98 SE: A Troubleshooting Decision Tree
- Best Adaptive and One-Handed Gaming Controllers in 2026
- Raspberry Pi OS Moves to Linux 6.18 LTS: Performance Gains for Pi 4 Owners
- Kimi K2.7 Code on an RTX 3060 12GB: Can a $300 GPU Run It?
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090