SplashNColor Cup Holder Compatible with Next Level Racing GT Track
Bottom line: The SplashNColor Cup Holder Compatible with Next Level Racing GT Track is a specs-and-price decision rather than a crowd-consensus one in the sim racing category, priced around $23.01 on Amazon as of 2026-11-20 11:25 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SplashNColor Cup Holder Compatible with Next Level Racing GT Track, so this read rests on the manufacturer's listed specs and the current price in the sim racing category (how we evaluate). Compare with similarly-priced alternatives in the sim racing category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- SECURE DRINK STORAGE — A drink left on a separate table puts your next sip outside the cockpit, while a cup in the driving area gets in your way. This holder gives your beverage an upright, supported spot on your sim racing rig, keeping it secure during racing sessions so your drink has somewhere to sit while you take the wheel instead of sharing the space where you drive.
- TAPERED CAN FIT — Set your 250 ml or 330 ml can into the shaped, tapered interior and keep your chosen drink beside you through a racing session. The interior accommodates these can sizes, so you have a place for a smaller can during a short run or a larger drink for a longer stint, with your beverage sitting in a holder rather than being balanced wherever you find an open spot.
- ROOM FOR COFFEE — Bring your coffee to the cockpit instead of leaving it across the room when you settle in for a morning race. The shaped interior also accommodates some coffee mugs and cups, with fit depending on their shape, giving you somewhere to set your coffee between sips while you stay seated at the wheel; choose a mug or cup whose shape sits properly inside the holder.
- THREADED MOUNTING POINT — The pre-sized hole accepts an M6 heat insert for a strong, durable threaded mounting connection, giving your drink holder a threaded attachment to your sim racing rig once the insert is fitted.
- RACING SEAT ACCESS — Keep your drink within easy reach when you pause between practice laps or finish a race, with your beverage near your driving position. Made for your sim racing rig, this holder brings beverage storage to your cockpit in a home gaming room or dedicated simulator space, putting your drink near the driver during short practice runs and longer sessions at the wheel. WHAT'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).
Full Specifications
| Full listing title | SplashNColor Cup Holder Compatible with Next Level Racing GT Track – Secure Drink Storage for Your Sim Racing Rig | Tapered Interior for Cans and Cups (Hardware Not Included - Check Description) |
|---|
Ready to buy?
SplashNColor Cup Holder Compatible with Next Level Racing GT Track – Secure Drink Storage for Your Sim Racing Rig | Tapered Interior for Cans and Cups (Hardware Not Included - Check Description) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Sim Racing
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- 256GB Samsung microSD Drops to $32 — Storage Prices Slide
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- MiMo-V2.5-Pro Local Hardware Requirements: 1T MoE, GGUF Sizes, Real Tok/s
- RetroArch Cores Download Guide: Safe Sources 2025
- Best Budget CPU for Gaming + Productivity in 2026: The Honest Buying Guide
- Best SSD for PS5 Storage Expansion Under $100 (2026)
- Best Travel Gaming Kit in 2026: 5 Picks for Hotels and Flights
- Best Streaming Starter Kit for Creators in 2026
- Steam Deck Randomly Awakens? Causes & Fixes (2026)
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- 20GB Homelab Memory Left: What to Add Next
- Best CPU Air Cooler for Ryzen 7000/9000 Builds (2026)
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- Voodoo3 3000 Won't POST: Troubleshooting a 1999 Build in 2026
- Claude Opus 4.8 Ships, Tops GPT-5.5 on Intelligence Index
- Steam Deck OLED vs ROG Xbox Ally X: 2026 Comparison
- Running GLM-5.2 Locally on an RTX 3060: Ollama VRAM + tok/s
- Running a Local LLM on a Raspberry Pi 4 Cluster — Realistic Expectations for 2026
- Best Budget Gaming Monitors Under $300 for 1080p in 2026
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- RTX 3090 vs RTX 4090 for LLM Inference: Same 24GB (2026)
- How to run Llama 3.1 70B on Apple M3 Ultra
- Ryzen AI Max+ 395 Specs: Full Breakdown and Comparison
- Build a Raspberry Pi 4 8GB Starter Home Lab in 2026: BOM + First Services
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090