Skip to main content
StarTech 3ft Coax High Resolution VGA Monitor Extension Cable (MXT101HQ3)
StarTech.com

StarTech 3ft Coax High Resolution VGA Monitor Extension Cable (MXT101HQ3)

Bottom line: The StarTech 3ft Coax High Resolution VGA Monitor Extension Cable: Coax construction reduces ghosting and fuzzy text on high-res VGA; main trade-off: only 3ft long, so too short for runs across a room.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Coax construction reduces ghosting and fuzzy text on high-res VGA
  • ✓ Ferrite cores at both ends help block EMI from nearby cables
  • ✓ HD-15 male to female design extends an existing VGA cable
  • ✓ Molded connectors hold up to repeated plugging behind desks and racks
  • ✓ Good fit for CRTs, retro PC builds, projectors and KVM setups

Cons

  • ✗ Only 3ft long, so too short for runs across a room
  • ✗ Analog VGA only; carries no HDMI, DVI or DisplayPort signal
  • ✗ Carries no audio; you need a separate cable for sound
  • ✗ Male-to-female design can't replace a standard male-to-male monitor cable

Manufacturer description

The StarTech.com MXT101HQ3 is a 3ft VGA extension cable for when your monitor cable is a little too short. It has an HD-15 male connector on one end and an HD-15 female connector on the other. Plug your existing VGA cable into the female end, run the male end to your PC, KVM switch or retro graphics card, and you gain three extra feet without changing your setup. What sets this StarTech cable apart from budget extensions is its coaxial construction. Analog VGA signals degrade easily, and cheaper non-coaxial cables often cause picture ghosting and fuzzy text, especially at higher resolutions…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for StarTech 3ft Coax High Resolution VGA Monitor Extension Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Coax construction reduces ghosting and fuzzy text on high-res VGA"; the main trade-off is "Only 3ft long, so too short for runs across a room". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Which connectors does the StarTech MXT101HQ3 have?

It has one HD-15 male connector and one HD-15 female connector. That is the standard 15-pin VGA layout, so it extends an existing VGA cable or device port.

How long is this VGA extension cable?

It is 3 feet long. That works well for short gaps, such as reaching a monitor that sits slightly beyond your current VGA cable or connecting through a KVM switch.

Will a coax VGA extension reduce ghosting on my monitor?

StarTech.com says the coaxial design helps eliminate the picture ghosting and fuzzy images common with non-coaxial cables. Ferrite cores near each connector add EMI protection. Results still depend on your source signal and your other cables.

Can I use it with an older CRT or a retro PC graphics card?

Yes, as long as the device uses a standard HD-15 VGA port. The cable passes the analog VGA signal, so it works with CRT monitors, vintage graphics cards and other VGA equipment.

Does this cable work with HDMI or DisplayPort outputs?

Not directly. The MXT101HQ3 carries only analog VGA. To connect a digital HDMI or DisplayPort output, you need a separate active converter, which is not included.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • VGA extension cable
  • HD-15 (M) to HD-15 (F)
  • molded

Full Specifications

BrandStarTech.com
ColorBlack
ModelMXT101HQ3
Cable TypeVGA
Item ShapeRound
Model NameSTARTECH.COM LTD
Unit Count1 Count
Item Length3 feet
Part NumberMXT101HQ3
Connector TypeVGA
Number of Pins15
Outer MaterialA common plastic or rubber material used for insulation and protection in coaxial cables
Maximum Voltage100 Millivolts
Number of Items1
Special FeatureData Transfer
Connector GenderMale-to-Female
Compatible DevicesMonitor
Indoor Outdoor UsageIndoor
Warranty DescriptionLifetime warranty
Customer Package TypeStandard Packaging

Ready to buy?

StarTech 3ft Coax High Resolution VGA Monitor Extension Cable (MXT101HQ3) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro CRT & Display Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →