Skip to main content
Bgear b-Blaster 80mm 2 Ball Bearing Fan 62CFM at 3500 RPM.
Bluegears

Bgear b-Blaster 80mm 2 Ball Bearing Fan 62CFM at 3500 RPM.

Bottom line: The Bluegears Bgear b-Blaster 80mm 2 Ball Bearing Fan 62CFM at 3500 RPM.: 62 CFM airflow at 3500 RPM from a standard 80mm frame; main trade-off: rated 3500 RPM speed favors airflow over quiet operation.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 62 CFM airflow at 3500 RPM from a standard 80mm frame
  • ✓ Dual ball bearings built for extended life at high speed
  • ✓ 3-pin lead with tach output lets the motherboard report RPM
  • ✓ Included 3-to-4-pin Molex adapter for direct PSU power
  • ✓ Fits case, PSU and CPU heatsink mounts; 4 screws included

Cons

  • ✗ Rated 3500 RPM speed favors airflow over quiet operation
  • ✗ No noise (dBA) rating listed in the product specs
  • ✗ 3-pin only, no 4-pin PWM speed control
  • ✗ Molex adapter runs the fan at full 12V speed, no RPM control

Manufacturer description

The Bluegears Bgear b-Blaster is an 80mm fan built for high airflow, rated at 62 CFM at 3500 RPM. It suits a retro PC with a cramped AT case, a worn power supply fan that needs replacing, or an 80mm CPU heatsink that needs a new fan. The fan uses two ball bearings, chosen for extended life and steady high-speed running. That matters in vintage builds, where period sleeve-bearing fans have often seized or started rattling after decades of use. You can wire it two ways. The fan has a 3-pin, 3-lead connector with a fan speed signal output, so your motherboard can read and report its RPM. If an…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Bluegears Bgear b-Blaster 80mm 2 Ball Bearing Fan 62CFM at 3500 RPM., so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "62 CFM airflow at 3500 RPM from a standard 80mm frame"; the main trade-off is "Rated 3500 RPM speed favors airflow over quiet operation". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How much airflow does the Bgear b-Blaster 80mm fan move?

It is rated at 62 CFM at 3500 RPM, according to the manufacturer's specifications.

Can I plug this fan into an old motherboard or power supply without a fan header?

Yes. It ships with a 3-pin to 4-pin Molex adapter, so you can power it directly from a power supply's Molex connector. On Molex power it runs at full speed.

Will my motherboard be able to monitor the fan speed?

Yes, when connected to a 3-pin fan header. The fan has a 3-lead connector with a fan speed (tach) signal output that reports RPM to the board. That signal is not passed through when you use the Molex adapter.

Can I use it to replace a power supply or CPU cooler fan?

The manufacturer lists it as suitable for PC cases, power supplies and CPU heatsinks that take an 80mm fan. Check that your mount fits an 80mm frame. Replacing a fan inside a power supply means opening a unit that holds high voltage, so only do it if you are qualified.

Is the fan loud, and does it come with mounting hardware?

The listing gives no noise rating, but at 3500 RPM it is tuned for airflow rather than quiet running. Four screws are included for mounting.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 2 Ball Bearing fan for Extended Life and High Performance
  • Extreme Speed with Excellent Airflow 62 CFM at 3500 RPM
  • Ideal for PC CASE, POWER SUPPLY and CPU heatsink
  • 3 pin 3 lead wire connector with Fan Speed signal output
  • Includes 3 to 4 pin Molex adapter for direct connect to Power Supply

Full Specifications

BrandBluegears
Modelb-Blaster 80mm 2 ball
Voltage12 Volts
Wattage4.08 watts
MaterialPlastic
Set Nameb-Blaster Series
Unit Count1.0 Count
Noise Level39 Decibels
Part NumberBG01534
CompatibilityPC
Material TypePlastic
Cooling MethodFan
Number of Items1
Air Flow Capacity62 Cubic Feet Per Minute
Compatible DevicesComputer, Cpu, Desktop, Gaming PC, Server
Power Connector Type3-Pin
Warranty Description1 year parts and labor
Maximum Rotational Speed3500 RPM
Item Dimensions L x W x H3.15"L x 0.98"W x 3.15"H

Benchmark data for other processors

Ready to buy?

Bgear b-Blaster 80mm 2 Ball Bearing Fan 62CFM at 3500 RPM. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro CPU Coolers & Fans

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →