DEWALT 20V MAX Circular Saw
Bottom line: The DEWALT 20V MAX Circular Saw ($99.00 on Amazon as of 2026-10-21 14:15 UTC): 5,150 RPM motor rips 2x lumber and sheet goods in one pass; main trade-off: bare tool: the 20V MAX battery and charger are not included.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 5,150 RPM motor rips 2x lumber and sheet goods in one pass
- ✓ Cuts 2-1/8 in deep at 90 degrees, 1-5/8 in at 45 degrees
- ✓ Magnesium shoe stays light without flexing off the cut line
- ✓ 0-50 degree bevel range covers rafter and compound cuts
- ✓ Keyless blade change with spindle lock; carbide blade included
Cons
- ✗ Bare tool: the 20V MAX battery and charger are not included
- ✗ 6-1/2 in blade tops out at 2-1/8 in depth, less than a 7-1/4 in saw
- ✗ Included 18-tooth blade is framing-focused; finish cuts need a finer blade
- ✗ Runtime is unlisted and depends on which 20V MAX pack you supply
Manufacturer description
The DEWALT 20V MAX Circular Saw (DCS391B) is a cordless sidewinder built for the cuts you would otherwise drag a corded saw and an extension cord across the jobsite to make. Its 5,150 RPM motor drives the included 6-1/2 inch, 18-tooth carbide-tipped blade through framing lumber and sheet goods, reaching 2-1/8 inches of depth at 90 degrees and 1-5/8 inches at 45 degrees, so 2x material clears in a single pass. The high-strength magnesium shoe keeps the saw light without giving up the rigidity that holds a cut line straight over a long day, and the bevel adjusts anywhere from 0 to 50 degrees…
SpecPicks Verdict
SpecPicks scored DEWALT 20V MAX Circular Saw using a rating × review-volume × price-fit model applied to published specs and reviews across the joysticks & game port category. DEWALT's joysticks & game port lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for joysticks & game port of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the DEWALT DCS391B come with a battery and charger?
No. The DCS391B ships as a bare tool, so the 20V MAX battery and charger are sold separately. A 6-1/2 inch 18-tooth carbide-tipped blade is included.
How deep will this circular saw cut?
Maximum cut depth is 2-1/8 inches at 90 degrees and 1-5/8 inches at 45 degrees, which clears 2x dimensional lumber in a single pass at both angles.
What blade comes with it, and how hard is it to change?
It includes a 6-1/2 inch 18-tooth carbide-tipped blade. Blade changes are keyless and use a spindle lock, so no wrench hunt is needed to swap in a finer-tooth blade.
Can it make bevel cuts, and how far does the shoe tilt?
Yes. The magnesium shoe bevels from 0 to 50 degrees, which covers standard 45-degree miters plus the more aggressive angles used in rafter and compound cuts.
Is it powerful enough for regular framing work?
The 5,150 RPM motor is aimed at lumber and sheet goods. It carries a 3-year limited warranty; check the product listing for current terms.
Key Features
- 5150 RPM motor delivers power and speed to make the most demanding cuts with ease
- High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy
- Optimized rubber over molded comfort grip delivers optimal balance and control of electric saw for wood cutting
- 0-50° bevel capacity allows for aggressive bevel cuts for a multitude of applications
- 6-1/2 inch 18-tooth carbide-tipped blade included for cutting 2 times material at 90° and 45° and more cuts per charge. Maximum cut depth @ 90°: 2-1/8 inches (2.125 in). Maximum cut depth @ 45°: 1-5/8 inches (1.625 in)
- 3 Year Limited Warranty
Full Specifications
| Brand | DEWALT |
|---|---|
| Color | Yellow |
| Speed | 5100 RPM |
| Voltage | 20 Volts |
| Unit Count | 1.0 Count |
| Blade Shape | Round |
| Blade Length | 6.5 Inches |
| Model Number | DCS391B |
| Power Source | Battery Powered |
| Cutting Angle | 50 Degrees |
| Warranty Type | Limited Warranty |
| Blade Material | High Speed Steel |
| Item Type Name | 20V MAX Li-Ion Circular Saw |
| Number of Teeth | 18 |
| Specification Met | (unset) |
| Included Components | 20v 6-1/2" circular saw |
| Number of Batteries | 1 Lithium Ion batteries required. |
| Surface Recommendation | Wood |
| Manufacturer Part Number | DCS391B |
| Item Dimensions L x W x H | 15.5"L x 8.5"W x 10.5"H |
| Full listing title | DEWALT 20V MAX Circular Saw, Cordless Sidewinder Style Portable, 6-1/2-Inch Blade, 5150 RPM, 0-50 Degree Bevel Capability, Battery Not Included (DCS391B) |
Ready to buy?
DEWALT 20V MAX Circular Saw, Cordless Sidewinder Style Portable, 6-1/2-Inch Blade, 5150 RPM, 0-50 Degree Bevel Capability, Battery Not Included (DCS391B) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for Running 27B-32B Local LLMs in 2026
- Build a Local Voice Assistant on a Raspberry Pi 4 8GB in 2026: Full BOM and Real Limits
- 2025 Local LLM Leaderboard: Best AMD GPUs Ranked
- Best Mouse Pads for Competitive FPS Gaming in 2026
- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- RTX 4090 AI Workstation vs AMD MI300X: 2025 Guide
- Qwen3.7-Plus Goes Agentic: Cloud Model vs Your Local 12GB Rig
- pxpipe Hides Prompts in PNGs to Cut Claude Code Tokens 70% — Or Just Run Local on an RTX 3060
- Dumping Big-Box CD-ROM Games in 2026 with an IDE-to-USB Adapter
- llama.cpp Vulkan vs CUDA on a 12GB RTX 3060: Which Backend Wins?
- Intel Arc B580 LLM Inference: 12GB Battlemage Benchmarks
- Qwen3.6 27B on a 12GB GPU: Quantization, Context, and Real-World Tok/s
- Blue Yeti vs HyperX QuadCast 2 S: Which USB Mic Wins for Streaming in 2026?
- Heterogeneous GPU Weighting and Layer Splitting: Mixed-GPU LLM Inference on Consumer Hardware
- 180Hz 1440p Gaming Monitors Hit Entry-Level Pricing
- Best Plug-and-Play Retro Console to Buy in 2026
- Self-Host Jellyfin and Home Assistant on a Raspberry Pi 4 8GB in 2026
- Save $550 on iBuyPower RTX 5070 + 7800X3D 4K Gaming PC
- Ryzen 5 5600G vs Ryzen 7 5700X for Budget 1080p Gaming
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
- Jetson Orin Nano Super vs Raspberry Pi 5: Real Edge-AI Benchmarks (2026)
- Ollama vs LM Studio vs vLLM: Choosing a Local LLM Runner
- Best Steam Deck Docked Setup for a 4K Desk in 2026: Dock, Monitor, Storage
- Best SATA SSDs for Older PCs and Retro Builds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090