iKKEGOL 30cm/12 OBD2 OBD II Splitter Extension Y J1962 16 Pin Cable Male to Dual Female Cord Adapter
Bottom line: The iKKEGOL 30cm/12 OBD2 OBD II Splitter Extension Y J1962 16 Pin Cable: Splits one J1962 port into two female 16-pin sockets; main trade-off: listing conflicts on male plug shape: straight vs right angle.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Splits one J1962 port into two female 16-pin sockets
- ✓ All 16 pins wired pin-to-pin to both outputs
- ✓ 30 cm (12 in) lead moves tools away from tight footwells
- ✓ Keeps a dongle or HUD installed while freeing a port for a scanner
- ✓ Works with standard OBD-II compliant vehicles and 16-pin tools
Cons
- ✗ Listing conflicts on male plug shape: straight vs right angle
- ✗ 12 in length may be too short to reach the passenger seat
- ✗ Two active scan tools on one bus can cause communication conflicts
- ✗ No warranty terms stated in the listing
Manufacturer description
The iKKEGOL OBD2 splitter Y cable turns your vehicle's single OBD-II port into two female J1962 16-pin sockets. You can keep a data logger, telematics dongle or head-up display plugged in and still have an open port for a diagnostic scan tool, without unplugging anything under the dash. The car side is a J1962 male plug. It feeds two J1962 female ports on a 30 cm (12-inch) lead, and all 16 pins are wired pin-to-pin, so every signal on the vehicle connector reaches both outputs. The short lead also lets you move a bulky scanner or dongle out of a tight footwell and away from your knees. The…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for iKKEGOL 30cm/12 OBD2 OBD II Splitter Extension Y J1962 16 Pin Cable…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cables & connectors category before committing. On the listing's own facts, the case for it is "Splits one J1962 port into two female 16-pin sockets"; the main trade-off is "Listing conflicts on male plug shape: straight vs right angle". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can I plug two OBD2 devices into my car at the same time with this splitter?
Yes. It turns one J1962 male port into two J1962 female ports with all 16 pins wired pin-to-pin. It works best with one passive device, such as a logger or HUD, and one active scan tool. Two tools querying the car at once can conflict.
How long is the iKKEGOL OBD2 splitter cable?
The listed extension length is 30 cm, which is 1 ft or 12 inches, measured from the male vehicle plug to the two female device ports.
Will this OBD-II Y cable work with my vehicle?
It is built for OBD-II compliant vehicles and equipment that use the standard J1962 16-pin connector. Check that your vehicle has a 16-pin OBD-II port before buying.
Is the male plug straight or right angle?
The listing is inconsistent. The specifications say the car-side J1962 male plug is straight, but one feature line describes it as right angle. If clearance behind your dash panel is tight, check the product photos before ordering.
Does the splitter pass through all OBD2 pins?
Yes. The specifications list the wiring as 16 pin-to-pin, so every pin on the vehicle port is carried to both female outputs.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- OBD-II Extension Cable The OBD2 16pin extension cable allows you to connect compatible diagnostic tools with a 16 pin socket
- "A right angle OBD-II Extension Cable that measures 12 inches long. On one end (the male) the adapter is at a right angle, the other two ends (female) is normal"
- This can be used to plug into an OBD-II compliant vehicle and coupled with OBD-II diagnostic hardware
- OBD2 16Pin male to female extension cable
- High-quality materials give the cable superior flexibility and durability
Full Specifications
| Brand | iKKEGOL |
|---|---|
| Unit Count | 1.0 Count |
| Screen Size | 12 Inches |
| Model Number | 10260 |
| Power Source | Adapter |
| Manufacturer Part Number | 10260 |
Ready to buy?
iKKEGOL 30cm/12 OBD2 OBD II Splitter Extension Y J1962 16 Pin Cable Male to Dual Female Cord Adapter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- How We Use a Vision-LLM to Install Sound Blaster and Voodoo Drivers on Windows 98 — A Real Workflow From Our…
- Sony Trinitron FW900 Setup for Retro Gaming: Resolution Sweet Spots, Calibration, and Refresh-Rate Math
- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- GeForce 4 Ti 4600 + Pentium 4 Northwood: Period-Correct 2002 Build Guide
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Best SSD for a Retro PC Build: SATA, CompactFlash, or IDE Bridge?
- The Truth About Sega's TradeMark Security System (TMSS)
- Streamer PC Specs Decoded: The 2026 Parts That Match
- The Sound Blaster Monopoly: How Creative Still Shapes Retro PC Audio in 2026
- Logitech G920 vs HORI Racing Wheel: Best Wheel for Forza Horizon 6
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Acer Nitro 65 Review: Solid Gaming, Connectivity Caveats
- Mistral Medium 3.5 Dense Local Inference: Hardware Tiers from 24GB to 192GB
- Qwen3-Coder-Next 80B-A3B on a 12GB RTX 3060: Per-Quant VRAM, RAM and tok/s
- CompactFlash as an IDE Drive: Silent, Period-Correct Storage for Win98 Rigs
- When Does a Homelab Become a Job?
- Cut AI API Bills: Run Local LLMs on an RTX 3060 12GB (2026)
- Watching a Z80 Live From a Raspberry Pi RP2350
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5080
- Intel Arc Pro B60 Price: Is $999 Worth It in 2025?
- Local LLM in VSCode: The 2026 Setup Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090