Silver Thermal Grease CPU Heatsink Compound Paste Syringe (5-pack)
Bottom line: The JacobsParts Silver Thermal Grease CPU Heatsink Compound Paste Syringe ($6.99 on Amazon as of 2026-10-21 16:25 UTC): Five 1.0g syringes per pack at 7.99 total, roughly 1.60 per tube; main trade-off: 1.0g per tube is thin for large IHS or dual-socket workstation boards.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Five 1.0g syringes per pack at 7.99 total, roughly 1.60 per tube
- ✓ Rated above 3.17 W/m.k thermal conductivity from 20% metal oxide loading
- ✓ Thermal resistance under 0.067 C-in2/w for tight die-to-heatsink transfer
- ✓ -50 to 180 C operating range covers cold storage and sustained load
Cons
- ✗ 1.0g per tube is thin for large IHS or dual-socket workstation boards
- ✗ Silver-loaded and metal-oxide based, so stray paste near pins needs care
- ✗ 3.17 W/m.k trails high-end pastes that publish 8-12 W/m.k figures
- ✗ Syringe applicators lack a spreader tool, so mount pressure does the work
Manufacturer description
The JacobsParts silver thermal grease 5-pack covers a full retro build season without a second order. Each syringe holds 1.0g of polysynthetic silver compound rated at greater than 3.17 W/m.k thermal conductivity and under 0.067 degrees C-in2/w thermal resistance, so heat moves off the die and into the heatsink instead of pooling under a dried-out pad. The 20% metal oxide loading is what carries that conductivity, and the -50 to 180 degrees C operating range means it holds up whether you are reviving a Socket 7 box in a cold basement or running a modern chip under sustained load. Five tubes…
SpecPicks Verdict
SpecPicks scored JacobsParts Silver Thermal Grease CPU Heatsink Compound Paste Syringe using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. JacobsParts's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many CPUs will one 1.0g tube cover?
One 1.0g syringe is sized for a single application on a typical desktop CPU using a rice-grain dot. With five tubes in the pack, plan on roughly one tube per machine for repasting jobs.
Is this thermal paste electrically conductive?
The listing specifies a polysynthetic silver compound with 20% metal oxide compounds rather than pure metal. Keep it off pins and surface-mount components anyway, and check the manufacturer listing for conductivity specifics before use near exposed contacts.
What temperature range can this compound handle?
JacobsParts rates it for -50 to 180 degrees C operation, which covers cold-room retro builds through sustained full-load CPU temperatures on both vintage and modern sockets.
How does 3.17 W/m.k compare to premium thermal pastes?
At greater than 3.17 W/m.k it sits in budget-compound territory; enthusiast pastes commonly publish 8 W/m.k and up. For retro CPUs with modest TDPs, the gap matters far less than having fresh paste instead of 20-year-old dried compound.
Is this worth buying over a single premium syringe?
At 7.99 for five tubes it works out to about 1.60 per application, which suits restorers working through multiple boards. If you are pasting one high-TDP chip you plan to overclock, a single higher-conductivity syringe is the better spend.
Key Features
- Weight: 1.0g/tube
- Operation Temperature: -50/180°c
- Thermal Conductivity: >3.17W/m.k
- Thermal Resistance: <0.067°c-in2/w
- 20% metal oxide compounds
Full Specifications
| Brand | JacobsParts |
|---|---|
| Weight | 1.0g/tube |
| Sterile | Non-Sterile |
| Material | Silver |
| Set Name | Series 7 |
| Unit Count | 5 Count |
| Item Volume | 1 ml |
| Part Number | PST-1G-SVR |
| Model Number | LYSB00M5G6AHY-ELECTRNCS |
| Thermal Resistance | <0.067°c-in2/w |
| Thermal Conductivity | >3.17W/m.k |
| Operation Temperature | -50/180°c |
Ready to buy?
Silver Thermal Grease CPU Heatsink Compound Paste Syringe (5-pack) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- ASRock Phantom Gaming vs Steel Legend 360 LCD Review
- Best CPU Cooler for AM5 Overclocking: Noctua NH-U12S vs Cooler Master ML240L
- Building a Local LLM Voice Assistant on Raspberry Pi 4 8GB: Whisper + Llama 3.2 1B Setup (2026)
- Why Cheap Monitors Use HDMI Instead of DisplayPort
- Best SATA SSD to Revive an Old Gaming PC in 2026
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- 1440p 500Hz QD-OLED Monitors: 2025 Round-Up
- Cursor vs Cline vs Aider for Local-First AI Coding in 2026
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Best Game Controllers for PC and Emulation in 2026
- Best DualSense and PC-Compatible Controller (2026)
- Home Assistant on a Raspberry Pi 4 8GB: 2026 Smart-Home Hub Build
- Best Cooler for a Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Build Your Own Air Quality Monitor: Skip the $300+ Price Tag
- BOSGAME VTA-439: A Linux-Friendly Ryzen AI Mini PC
- Best Esports Club Practice Room Gear in 2026
- International Women in Engineering Day 2026: A Beginner's Pi Starting Point
- Ryzen 9800X3D Idle Temp: What's Normal (2026 Guide)
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- Best SSD for Steam Deck and Handheld Emulation in 2026
- Beijing's $295B AI Buildout Wants 80% Domestic Chips — What It Means for GPU Buyers
- Best Plug-and-Play Retro Game Console in 2026
- Is the Ryzen 7 7800X3D Worth It in 2026?
- Best Sim Racing Wheel & Pedal Setup in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090