Skip to main content
Bertech ESD Anti-Static Table Mat Kit, 2.5 Ft x 4 Ft, Blue, Includes Wrist Strap and Grounding Cord, MADE IN USA
Bertech

Bertech ESD Anti-Static Table Mat Kit

Bottom line: The Bertech ESD Anti-Static Table Mat Kit: 30 x 48 in surface fits a full ATX board plus a disassembled console; main trade-off: rated only to 160 F, so keep hot soldering iron tips and hot air off the mat.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 30 x 48 in surface fits a full ATX board plus a disassembled console
  • ✓ Kit includes wrist strap and ground cord, so there are no extra parts to buy
  • ✓ Snap comes pre-installed, so it is ready to ground out of the box
  • ✓ Holds up to alcohols, acids and detergents, so isopropyl cleanup is safe
  • ✓ Reversible and easy to cut down to a custom bench size

Cons

  • ✗ Rated only to 160 F, so keep hot soldering iron tips and hot air off the mat
  • ✗ Single-layer PVC, not the two-layer rubber that some rework benches prefer
  • ✗ 10e9-10e10 ohm surface sits at the dissipative end, so discharge is slower than conductive mats
  • ✗ Needs a grounded point to work; the cord does nothing unless it is connected

Manufacturer description

The Bertech ESD Anti-Static Table Mat Kit turns an ordinary bench into a static-safe workspace for recapping retro motherboards, swapping vintage RAM, or servicing a modern PC. The blue mat measures 2.5 x 4 feet (30 x 48 inches) and is 0.094 inches thick, which leaves room for a full ATX board, a disassembled console, and your tools side by side. You get the mat, an ESD wrist strap and a ground cord in one kit. The snap is already installed, so the only setup is to connect the cord and lay the mat out. Bertech makes the mat from a single-layer homogenous PVC polymer blend with a surface…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Bertech ESD Anti-Static Table Mat Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "30 x 48 in surface fits a full ATX board plus a disassembled console"; the main trade-off is "Rated only to 160 F, so keep hot soldering iron tips and hot air off the mat". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How big is the Bertech ESD mat in this kit?

The mat is 2.5 feet (30 inches) wide, 4 feet (48 inches) long and 0.094 inches thick.

What comes in the box besides the mat?

The kit includes an ESD anti-static wrist strap and an ESD ground cord. The mat comes with its snap already installed, so you only need to connect the cord to a ground point.

Can I solder directly on this mat?

The rated service temperature is -20 to 160 degrees F. A soldering iron tip or hot-air nozzle runs far hotter than that, so use a separate heat-resistant pad or iron stand on top of the mat.

Can I clean flux and spills off it with isopropyl alcohol?

Yes. Bertech says the mat resists degradation by alcohols, detergent solutions, reducing agents and organic and inorganic acids.

Can I cut the mat to fit a smaller workbench?

Yes. Bertech describes the mat as easy to cut and reversible. Keep the section with the pre-installed snap so you can still attach the ground cord.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • BLUE ESD TABLE MAT SPECS: Mat is 2.5 Feet (30 inches) wide x 4 Feet (48 inches) long x 0.094 inches thick. Comes with an ESD Anti-Static Wrist Strap and ESD Anti-Static Ground Cord. Mat already has a snap and is ready to be used out of the box with minimal assembly.
  • HIGH QUALITY ESD ANTI-STATIC MATERIAL: Made of a blue color single layer homogenous polymer mix with ESD Anti-Static properties for various worksurfaces and tables.
  • ESD ANTI-STATIC SPECS: Surface Resistivity (10e9 - 10e10 ohms); Thickness (0.094"); Tensile Strength (900 lbs./in. sq.); Service Temperature (-20 degrees F to 160 degrees F); RoHS Compliant.
  • ESD APPLICATIONS: Aerospace Assembly, Mobile Phone and Computer Repairs, Computer Technicians, Electronic Assembly, Fiber Optics Manufacturing, Hospitals, Server Setup, Electronics Manufacturing and Solar Industries.
  • CHEMICAL RESISTANT: Resistant to degradation by organic/inorganic acids, reducing agents, detergent solutions, and alcohols.

Full Specifications

BrandBertech
ColorBlue
ShapeRectangular
PatternSolid
MaterialVinyl
Unit Count1 Count
Model Number1059-2.5x4BKT
Material TypeVinyl
Item Thickness0.09 Inches
Number of Items1
Special FeatureDurable
CHEMICAL RESISTANTResistant to degradation by organic/inorganic acids, reducing agents, detergent solutions, and alcohols.
Additional FeaturesDurable
Included ComponentsMat, Wrist Strap, Grounding Cord
Manufacturer Part Number1059-2.5x4BKT
Product Care InstructionsWipe with Damp Cloth, Avoid Harsh Detergents
Item Dimensions L x W x Thickness0.09"Th
HIGH QUALITY ESD ANTI-STATIC MATERIALMade of a blue color single layer homogenous polymer mix with ESD Anti-Static properties for various worksurfaces and tables.
Full listing titleBertech ESD Anti-Static Table Mat Kit, 2.5 Ft x 4 Ft, Blue, Includes Wrist Strap and Grounding Cord, MADE IN USA

Ready to buy?

Bertech ESD Anti-Static Table Mat Kit, 2.5 Ft x 4 Ft, Blue, Includes Wrist Strap and Grounding Cord, MADE IN USA is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →