Skip to main content
Bertech ESD Anti-Static Table Mat Kit, 18 in. x 30 in., Blue, Includes an ESD Wrist Strap and ESD Grounding Cord, Made in USA
Bertech

Bertech ESD Anti-Static Table Mat Kit

Bottom line: The Bertech ESD Anti-Static Table Mat Kit: 10^9-10^10 surface resistivity drains static at a controlled rate; main trade-off: 18 x 30 in. may be too small to cover a full-width workbench.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 10^9-10^10 surface resistivity drains static at a controlled rate
  • ✓ Kit includes mat, adjustable wrist strap and grounding cord
  • ✓ Resists oils, grease, common solvents, hot solder and soldering irons
  • ✓ 18 x 30 in. surface fits a motherboard, PSU and tools at once
  • ✓ RoHS-compliant two-layer polymer mat, made in USA

Cons

  • ✗ 18 x 30 in. may be too small to cover a full-width workbench
  • ✗ 0.093 in. thickness gives little cushioning for dropped parts
  • ✗ No maximum heat rating listed for soldering-iron contact
  • ✗ Wrist strap and grounding cord lengths not stated in the listing

Manufacturer description

The Bertech ESD Anti-Static Table Mat Kit gives you a dedicated, static-dissipative surface for working on sensitive electronics. The blue mat measures 18 inches wide by 30 inches long and is 0.093 inches thick. It is rated at a surface resistivity of 10^9 to 10^10, so static charge drains in a controlled way instead of jumping into exposed boards and chips. The kit includes everything needed to ground your bench. Along with the mat, you get an adjustable ESD fabric wrist strap with a removable alligator clip and a grounding cord, which ties you, the mat and the workpiece to a common ground…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Bertech ESD Anti-Static Table Mat Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "10^9-10^10 surface resistivity drains static at a controlled rate"; the main trade-off is "18 x 30 in. may be too small to cover a full-width workbench". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What size is the Bertech ESD mat and how thick is it?

The mat is 18 inches wide by 30 inches long and 0.093 inches thick. That is enough room to lay out a full-size motherboard with a few components and hand tools beside it.

What comes in the Bertech anti-static mat kit?

The kit includes the blue ESD mat, an adjustable ESD fabric wrist strap with a removable alligator clip, and a grounding cord for connecting the setup to ground.

Can I solder directly on this ESD mat?

Bertech says the mat resists hot solder and soldering irons, as well as oils, grease and most common solvents. The listing gives no maximum temperature rating, so use an iron stand and avoid resting a hot tip on the mat for long periods.

What is the surface resistivity of the Bertech mat?

The rated surface resistivity is 10^9 to 10^10. That is in the static-dissipative range, so charge bleeds off gradually instead of discharging suddenly into components.

Is this mat suitable for building PCs or repairing retro consoles?

Yes. The kit grounds both you and the work surface, which protects RAM, CPUs, GPUs, vintage motherboards and console boards while you handle them. Connect the grounding cord to a verified earth ground for the mat and strap to work as intended. Check the product listing for current warranty terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Sold as 1 Each.
  • Applications: Aerospace assembly, Contract manufacturing, Electronic assembly, Semi-conductor facilities. Kit includes a wrist strap and grounding cord.
  • 18 inches wide by 30 inches long. Surface Resistivity: 10^9 - 10^10.
  • Made from a homogeneous polymer mix. RoHS Compliant.
  • Mat Thickness: .093 inches. Made in USA.

Full Specifications

BrandBertech
ApplicationsAerospace assembly, Contract manufacturing, Electronic assembly, Semi-conductor facilities. Kit includes a wrist strap and grounding cord.
Mat Thickness.093 inches. Made in USA.
Full listing titleBertech ESD Anti-Static Table Mat Kit, 18 in. x 30 in., Blue, Includes an ESD Wrist Strap and ESD Grounding Cord, Made in USA

Ready to buy?

Bertech ESD Anti-Static Table Mat Kit, 18 in. x 30 in., Blue, Includes an ESD Wrist Strap and ESD Grounding Cord, Made in USA is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →