2 in 1 Out 2 Port VGA Switch - Press Button Two Way Video Switch for PC TV Monitor - Black
Bottom line: The PASOW 2 in 1 Out 2 Port VGA Switch ($9.99 on Amazon as of 2026-10-06): Three standard VGA female ports route 2 hosts to 1 monitor, or 1 host to 2 displays; main trade-off: not a splitter - cannot mirror one signal to two monitors at once.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Three standard VGA female ports route 2 hosts to 1 monitor, or 1 host to 2 displays
- ✓ No power adapter needed - fully passive, plug and play
- ✓ Supports resolutions up to 1920x1440, covering VGA-era through 1080p displays
- ✓ Single press button switches the active source, no software or hotkeys
Cons
- ✗ Not a splitter - cannot mirror one signal to two monitors at once
- ✗ Only one resolution passes at a time; mismatched monitors need manual resets
- ✗ Manual button means no remote or keyboard-triggered switching
- ✗ VGA only - no DVI, HDMI, or DisplayPort inputs
Manufacturer description
The PASOW 2-in-1-out VGA switch solves a specific retro-PC problem: two machines, one monitor, and no room for a second display. Three standard VGA female ports handle the routing, and a single press button flips the active source, so you can jump between a period-correct DOS box and a modern tower without crawling under the desk to swap cables. It runs unpowered - plug and play, no wall wart competing for outlet space - and supports resolutions up to 1920x1440, which covers everything from 640x480 VGA-era output to a 1080p LCD. The box works in both directions: two hosts sharing one…
SpecPicks Verdict
SpecPicks scored PASOW 2 in 1 Out 2 Port VGA Switch using a rating × review-volume × price-fit model applied to published specs and reviews across the retro graphics & video category. PASOW's retro graphics & video lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro graphics & video of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can this VGA switch send one PC to two monitors at the same time?
No. PASOW states in the product notes that this unit cannot send 1 VGA signal to 2 monitors simultaneously - it is a switch, not a splitter. It routes to one active display at a time.
What is the maximum resolution this switch supports?
Up to 1920x1440 per the manufacturer specs, which covers 1920x1080, 1600x1200, and all lower VGA-era modes.
Does it need a power adapter?
No external power is needed. The switch is passive plug and play - connect the three VGA cables and press the button to change sources.
Why does my display look wrong after switching monitors?
The host can only output one resolution at a time. If your two monitors run different native resolutions, for example 1920x1080 and 1440x900, you must reset the host resolution to match whichever display you switched to.
How many ports does it have and what type are they?
Three standard VGA female ports in a 2-in, 1-out configuration, so both source cables and the display cable are standard male-ended VGA.
Key Features
- Note: This VGA switch cannot send 1 VGA signal to 2 monitors at the same time (NOT a splitter).
- Switcher and Splitter 2 in 1: 2 hosts share 1 display / 2 displays share 1 host,Press Button Two Way VGA Switch Splitter
- Device Type: 2 PC to 1 Monitor VGA Switch Box Interface Type: 3 standard VGA female (2 in 1 out)
- No external power needed, plug and play; supports up to 1920*1440 resolution
- Depending on the size of the monitor, the resolution is not the same, the host can set only one resolution at the same time.After switching the monitor, you must replace the monitor resolution. For exemple, one monitor resolution of 1920 * 1080, and another is 1440 * 900, you must set the monitor resolution to 1920*1080 when you switch to the first monitor,and set the monitor resolution to 1440*900 when you switch to the second monitor.
Full Specifications
| Note | This VGA switch cannot send 1 VGA signal to 2 monitors at the same time (NOT a splitter). |
|---|---|
| Brand | PASOW |
| Color | Black |
| Model | 8541769690 |
| Material | Polycarbonate |
| Terminal | Button |
| Unit Count | 1 Count |
| Device Type | 2 PC to 1 Monitor VGA Switch Box Interface Type: 3 standard VGA female (2 in 1 out) |
| Part Number | PAS-2IN1OUT |
| Switch Type | Push Button |
| Circuit Type | 2-way |
| Contact Type | Normally Open |
| Control Type | manual |
| Actuator Type | Push Button |
| Compatibility | PC, Switch |
| Material Type | Polycarbonate |
| Mounting Type | Plug-In Mount |
| Connector Type | VGA |
| Control Method | Push Button |
| Operation Mode | manual |
Ready to buy?
2 in 1 Out 2 Port VGA Switch - Press Button Two Way Video Switch for PC TV Monitor - Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro Graphics & Video
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Old Massive Chieftec Full Tower: Homelab Gem or Junk?
- Intel Arc LLM Inference: A770 & B580 Guide 2025
- Why Privacy-Preserving AI Demand Is Rising in the LLM Era
- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- Best Handheld Gaming PC Under $300 in 2026
- Best Raspberry Pi Alternative for Klipper in 2026 (and When the Pi Still Wins)
- Ryzen 5 5600G vs Intel i7-9700K for Budget Gaming in 2026
- GPT-5.6 Sol Reportedly Cracks a 30-Year Statistics Conjecture in 90 Minutes
- Anthropic May Follow Microsoft to AMD: What It Means for Home AI Rigs
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Gaming
- MCL8080+ Squeezes an Intel 8080 Emulator into an ATtiny85
- Does a Gaming Mouse Pad Actually Improve Your Aim? QcK vs Generic
- Retro Game Emulator Download 2026: Best Picks for AMD PCs
- Why AI Memory Bandwidth Matters: From Micron's HBM to Your GDDR6
- LM Studio vs Jan.ai vs Ollama on an RTX 3060 12GB: Which Local Runner Wins?
- Best 4K Monitor for PS5 and PC Under $500: KOORUI QD-Mini LED vs Samsung Odyssey
- OpenAI Now Uses AI to Red-Team Its Own Models: What It Means for Local Setups
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- Ryzen 7 5700X vs 5800X for a 2026 Gaming and Streaming Build
- Running a Local LLM on a Raspberry Pi 4 Cluster — Realistic Expectations for 2026
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
- Ryzen 7 5800X + RTX 5060 Bundle Drops to $439 With a Free CPU Cooler
- Cloudflare Swaps Its Blanket AI Bot Block for Granular Crawler Controls
- Intel Arc Pro B70 Linux Gaming Performance 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090