Outerimpact Savage AccuTrigger (Rounded Receiver) Long Action Picatinny Scope Base with 0 MOA
Bottom line: The Outerimpact Savage AccuTrigger Long Action Picatinny Scope Base is a specs-and-price decision rather than a crowd-consensus one in the retro graphics cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Finish: Matte Black, Material: Billet 6061-T6 aluminum.
- ✓ Backed by Outerimpact's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
The Outerimpact picatinny rail for the Savage AccuTrigger (Rounded Receiver) (Long Action) is machined from billet 6061 aluminum. Rail is coated utilizing type III hard coat anodizing with up to 68 Rockwell. NOTE: WILL NOT WORK ON FLAT BACK RECEIVERS.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Outerimpact Savage AccuTrigger Long Action Picatinny Scope Base, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro graphics cards category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro graphics cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatible Guns: Savage Accu-trigger (Rounded Receiver): 111, 112, 114, 116. Note: Will only fit 110 models with 6-48 screw holes. If your gun does not have an Accu-Trigger, this will NOT work on your gun. There is a good chance you need a Picatinny Base that accommodates a "flat-back receiver" This is for LONG action receivers. Please consult graphic with hole spacing measurements to determine if your receiver is a LONG action. Does NOT fit 10 BA or Axis and Axis II
- MOA: 0
- Finish: Matte Black, Material: Billet 6061-T6 aluminum.
- Coating: Type III hard coat anodized 68 Rockwell.
- Mounting Hardware: Four (4) 6-48 Weaver T-10 Torx Head screws (included). PLEASE confirm that your receiver uses 6-48 screws. Additional Tools: T-10 Torx driver (not included).
Full Specifications
| MOA | 0 |
|---|---|
| Brand | Outerimpact |
| Color | Matte Black |
| Finish | Matte Black, Material: Billet 6061-T6 aluminum. |
| Coating | Type III hard coat anodized 68 Rockwell. |
| Material | Billet 6061-T6 aluminum |
| Sport Type | Hunting/Shooting |
| Part Number | OTL-SAVL-PCAT01 |
| Package Weight | 0.05 Kilograms |
| Item Dimensions LxWxH | 6.86 x 0.78 x 0.31 inches |
| Item Package Dimensions L x W x H | 10.3 x 4 x 0.2 inches |
Benchmark data for other graphics cards
Ready to buy?
Outerimpact Savage AccuTrigger (Rounded Receiver) Long Action Picatinny Scope Base with 0 MOA is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Graphics Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for Llama 3.1 8B (2026)
- Intel IPEX-LLM vs Ollama on AMD: AI Rig Guide 2025
- Raspberry Pi 5 Specs: Full 2025 Breakdown
- DIY Pinball Controller for Retro Gaming: Build Guide
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- gpt-oss 20B vs Phi-4 14B on a 12 GB GPU: Which One Actually Fits?
- Intel Arc Pro B60 24GB: AI Workstation GPU Guide 2025
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- Period-Correct Windows 95 Pentium MMX Build Guide: 3dfx Voodoo 1, AWE32, and Authentic 1996 Gaming
- Best Streaming Kit for New Creators in 2026
- Raspberry Pi 5 8GB Review: Specs, Price & Use Cases (2025)
- Best Hardware for a Home Game Server in 2026
- Is the KOORUI 27" 4K QD-Mini LED Worth It for RTX 3060 Gaming?
- Self-Host Jellyfin on a Raspberry Pi 4 8GB: Real Transcoding Numbers
- Gemma-4-Harmonia-31B Heretic: What the Uncensored Merge Adds Over Base Gemma 4
- Best Game Controllers for PC and Emulation in 2026
- How to run Llama 3.1 70B on Apple M4 Max
- Best Game Controllers for PC and Console (2026)
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- Best Budget GPU for Local LLMs in 2026: The 12GB RTX 3060 Case
- Best PC Gaming Controller 2026: GameSir G7 SE vs 8BitDo Pro 2 vs Sony DualSense
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090