MOLEX 19043-0010 3 WAY ADAPTER
Bottom line: The MOLEX 19043-0010 3 WAY ADAPTER: Turns one 6.35mm male tab into two, so a single terminal can feed two wires; main trade-off: uninsulated body leaves bare metal; add heat shrink or a boot near live parts.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Turns one 6.35mm male tab into two, so a single terminal can feed two wires
- ✓ Pack of 10 adapters covers several splits plus spares in one order
- ✓ Genuine Molex part number 19043-0010 for exact reorders and cross-referencing
- ✓ Quick disconnect design lets you unplug and rework wiring without cutting
- ✓ Standard 6.35mm (0.250 in) size matches a very common spade terminal format
Cons
- ✗ Uninsulated body leaves bare metal; add heat shrink or a boot near live parts
- ✗ Only fits 6.35mm tabs; 4.8mm or 2.8mm terminals need a different adapter
- ✗ Current and wire ratings are not in the listing; check the Molex datasheet
- ✗ Adds length and bulk at the terminal, which can crowd tight switch housings
Manufacturer description
The Molex 19043-0010 is a 3-way quick disconnect adapter that splits one terminal into two. It has two male tabs and one female receptacle, all in the standard 6.35mm (0.250 in) size. Push the female end onto an existing 6.35mm male tab and you get two male tabs in its place. That lets you run a second wire from a terminal that only had room for one, without cutting or splicing. The pack holds 10 adapters, so one order covers several connections plus spares. The adapters are uninsulated. The metal is bare, so you can see how well each connection is seated, but you should add heat shrink or…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOLEX 19043-0010 3 WAY ADAPTER, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Turns one 6.35mm male tab into two, so a single terminal can feed two wires"; the main trade-off is "Uninsulated body leaves bare metal; add heat shrink or a boot near live parts". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What does the Molex 19043-0010 adapter actually do?
It splits one quick disconnect terminal into two. The single female end goes onto an existing 6.35mm male tab, and the adapter gives you two 6.35mm male tabs to connect wires to.
What size terminals does it fit?
It is built for 6.35mm (0.250 in) quick disconnect terminals. It will not fit smaller 4.8mm (0.187 in) or 2.8mm (0.110 in) tabs.
How many adapters come in the pack?
The listing is for 10 pieces of the Molex 19043-0010 3-way adapter.
Is the adapter insulated?
No. The listing says it is uninsulated, so the metal is bare. Cover it with heat shrink or an insulating boot wherever it could touch other conductors or a metal chassis.
What current and wire gauge is it rated for?
The product listing does not give current, voltage, or tab-thickness ratings. Look up part number 19043-0010 on the Molex datasheet for those specs before you use it in a high-load circuit.
Full Specifications
| Brand | Molex |
|---|---|
| Part Number | WT31051 |
| Measurement System | Metric |
| Package Dimensions | 6.5 x 3.39 x 0.43 inches |
| Item Package Quantity | 10 |
| Full listing title | MOLEX 19043-0010 3 WAY ADAPTER, DUAL MALE TO SINGLE FEMALE, QUICK DISCONNECT, 6.35MM, UNISULATED (10 pieces) by Molex |
Ready to buy?
MOLEX 19043-0010 3 WAY ADAPTER, DUAL MALE TO SINGLE FEMALE, QUICK DISCONNECT, 6.35MM, UNISULATED (10 pieces) by Molex is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Storage Upgrades for Retro and Budget PC Builds in 2026
- Intel Axes BigDL: Local-LLM Picks for Consumer GPUs in 2026
- OpenAI Codex Now Repeats a Task After Watching Once — Local Agentic Alternatives
- GPT-5.6 Sol Ships Under Government Access OpenAI Calls Unsustainable
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5080
- Benchmarking Asus Tablet Repairability Scores 2026
- Best PC Gaming Peripherals in 2026: 5 Picks for Keyboard, Audio, and Control
- OpenAI Names Its Biggest Data Center Yet, With NVIDIA Backing: What It Means
- Best CPU Cooler for AM5 Ryzen 9 Overclocking (2026)
- Intel Arc Pro B60 AI: 24GB VRAM for Local LLMs in 2026
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Build a Pocket Retro Emulation Handheld on the Raspberry Pi Zero W in 2026
- Ryzen AI Max+ 395 128GB vs Dual RTX 3060 for Local LLMs
- Best SSD for a Steam Deck or ROG Ally Upgrade (2026)
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- GameSir G7 SE vs 8BitDo Pro 2 vs DualSense for PC
- Best Wireless Keyboard for Office and Hybrid Work in 2026
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- Can a Ryzen AI Max+ 395 Mini-PC With 128GB Run Big LLMs? The r/LocalLLaMA Question
- CompactFlash + IDE Storage for a Period-Correct Windows 98 Build
- Best PCI Serial and IDE Adapters for Retro PCs in 2026
- Gemma 4 Stealth Update Fixes Tool Calling: What Changes Locally
- Build a 2001 GeForce3 + Win98 SE Gaming Rig in 2026: Parts and Gotchas
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090