Skip to main content
6 Inch Sata 15-Pin Male to Dual 4 Pin Molex Lp4 Female IDE Hard Drive Power Y-Adapter Converter Cable,Male to Female for 12V/5V IDE HDD DVD
zdyCGTime

6 Inch Sata 15-Pin Male to Dual 4 Pin Molex Lp4 Female IDE Hard Drive Power Y-Adapter Converter Cable,Male to Female for 12V/5V IDE HDD DVD

Bottom line: The 6 Inch Sata 15-Pin Male to Dual 4 Pin Molex Lp4 Female IDE Hard Drive: Turns one unused SATA power lead into two 4-pin Molex LP4 outputs; main trade-off: at 6 inches, it may not reach drives in distant bays.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Turns one unused SATA power lead into two 4-pin Molex LP4 outputs
  • ✓ 18AWG tinned copper UL1007 wire, per the listed specs
  • ✓ Short 6-inch (15 cm) length keeps case wiring tidy
  • ✓ Supplies 5V and 12V DC for IDE hard drives and DVD drives
  • ✓ Lets a modern PSU power legacy IDE drives in retro builds

Cons

  • ✗ At 6 inches, it may not reach drives in distant bays
  • ✗ Both Molex outputs share a single SATA power connector
  • ✗ Best for drives; not meant for high-current loads
  • ✗ Outputs 5V and 12V only, like any LP4 connector

Manufacturer description

Running out of Molex connectors while your power supply still has unused SATA power leads? The zdyCGTime SATA to dual Molex Y-adapter cable converts one 15-pin SATA male power connector into two 4-pin Molex LP4 female connectors. Use it to power IDE hard drives, DVD drives and other legacy 5.25-inch peripherals from a modern PSU. The cable is 6 inches (15 cm) long, so it stays short and tidy behind drive cages. That keeps slack out of your airflow path, which matters in compact cases and crowded retro builds. According to the listing, it uses 18AWG tinned copper UL1007 wire and carries 5V…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for 6 Inch Sata 15-Pin Male to Dual 4 Pin Molex Lp4 Female IDE Hard…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Turns one unused SATA power lead into two 4-pin Molex LP4 outputs"; the main trade-off is "At 6 inches, it may not reach drives in distant bays". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What connectors are on each end of this cable?

One end has a 15-pin SATA male power connector, which plugs into a SATA power lead from your PSU. The other end splits into two 4-pin Molex LP4 female connectors, which plug into your devices.

How long is the zdyCGTime SATA to Molex adapter?

The cable is 6 inches (15 centimeters) long. Before you buy, measure the distance from your free SATA power lead to the drives you plan to power.

Will this power an old IDE hard drive or DVD drive?

Yes. It is designed for IDE hard drives and DVD drives that take a 4-pin Molex LP4 power connector, and it supplies the 5V and 12V DC those drives use.

What wire gauge does this adapter use?

The listing specifies 18AWG tinned copper UL1007 wire.

Can I power two devices at once with one adapter?

Yes, the two Molex female connectors can each power a device. Both draw from a single SATA power connector, so use them for drives and other low-draw peripherals, not high-current loads.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Add more Molex connections by using unused SATA power connections.
  • Quality Construction, built with exacting standards.
  • Cable Length: 6 inch (15 centimeter)
  • Connector Details: 1x15-pin SATA Male Power Connector,2x4-pin Molex Female Connector.
  • Convert a Serial ATA power connection to the LP4 power connection

Full Specifications

BrandzdyCGTime
ColorBLACK
Gauge18.0
Model8541686491
Cable TypeUSB
Item ShapeRound
Unit Count1.0 Count
Item Length6 Inches
Part NumberBU-050
Cable Length6 inch (15 centimeter)
Connector Type4 Pin Molex, Sata
Number of Pins23
Maximum Voltage12 Volts (DC)
Number of Items1
Special FeatureTangle Free
Connector GenderMale-to-Female
Connector Details1x15-pin SATA Male Power Connector,2x4-pin Molex Female Connector.
Specification MetRoHS
Compatible DevicesDVD Player
Indoor Outdoor UsageIndoor, Outdoor

Ready to buy?

6 Inch Sata 15-Pin Male to Dual 4 Pin Molex Lp4 Female IDE Hard Drive Power Y-Adapter Converter Cable,Male to Female for 12V/5V IDE HDD DVD is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →