GENNEL 10mm Double Sided Thermal Conductive Tape for Heatsink Northbridge
Bottom line: Per its Amazon listing, the 10mm Double Sided Thermal Conductive Tape for Heatsink Northbridge ($8.99 on Amazon as of 2026-11-21 05:29 UTC): package lncluded: 1 Roll 10mm x 25m Double Sided Thermal Adhesive Tape.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Package lncluded: 1 Roll 10mm x 25m Double Sided Thermal Adhesive Tape.
- ✓ Backed by GENNEL's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 10mm Double Sided Thermal Conductive Tape for Heatsink Northbridge, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Excellent Adhesion, Easy to Use: can effectively replace the grease, liquid glue fixation, improving the heat transfer between electronic components. Just paste it on, no curing time.
- High Thermal Conductivity: Stable performance, Long-lasting adhesion on both sides, Can be tightly and firmly fit the heat source devices and heat sink, to achieve the effect of heat dissipation.Thermal tape with the Tensile resistance, softness, compression.
- Ultra-thin film with insulation and non-conductive, Low cost solution for many application. Long term heat resistance: 120 ℃; Short term heat resistance: 180 ℃; Thermal Conductivity:1.6w/m-K; Adhesive power: 1.3kg/inch; Breakdown Voltage:4kv; Size: 10mm x 25m or 0.4inch x 82ft (W x L), Thickness: 0.25mm
- Wide Range of Use: Thermal Tape applies to Heatsink, CPU, GPU, HDD, IGBT, High Power LED, LED Strips, Laptop, PCB, Video Card RAM, MOS Tube, 3D printer, Circuit Board, DDR Memory Modules, SSD Drives, Power Semiconductors, etc.
- Package lncluded: 1 Roll 10mm x 25m Double Sided Thermal Adhesive Tape.
Full Specifications
| Brand | GENNEL |
|---|---|
| Model | LYSB019MUICV2-ELECTRNCS |
| Weight | 1.3kg |
| Unit Count | 1 Count |
| Part Number | GNDR1710 |
| Mounting Type | Panel Mount |
| Number of Items | 1 |
| Number of Packs | 1 |
| Package lncluded | 1 Roll 10mm x 25m Double Sided Thermal Adhesive Tape. |
| Cooler Heatsink Material | Aluminum |
| Item Dimensions L x W x H | 0.39"W x 0.01"H |
| Cooler Heatsink Compatibility | Various computer components and hardware configurations |
| Excellent Adhesion, Easy to Use | can effectively replace the grease, liquid glue fixation, improving the heat transfer between electronic components. Just paste it on, no curing time. |
| Full listing title | 10mm Double Sided Thermal Conductive Tape for Heatsink Northbridge | Non-Electrical Conductive Thermal Heatsink Tape, Thermal Pad for Heatsink LED Strip Mosfet SSD DDR GPU CPU PCB IC Chipset |
Benchmark data for other processors
Ready to buy?
10mm Double Sided Thermal Conductive Tape for Heatsink Northbridge | Non-Electrical Conductive Thermal Heatsink Tape, Thermal Pad for Heatsink LED Strip Mosfet SSD DDR GPU CPU PCB IC Chipset is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 5 5600G vs Intel i7-9700K for Budget Gaming in 2026
- Best Dorm Room Gaming Setup in 2026: 5 Picks That Fit One Desk
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- Running Windows XP Off a 2.5-inch SATA SSD via an IDE Adapter (2026 Guide)
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5080
- Best Budget GPU for Local Stable Diffusion and ComfyUI in 2026
- Inside the Creative Katana V2X Soundbar Teardown — and What It Says About Sound Blaster
- Acer Nitro 65 Review: Solid Gaming, Connectivity Caveats
- Imaging a vintage IDE hard drive with a USB adapter in 2026
- Best Streaming Starter Kit for Creators in 2026
- Self-Host Home Assistant on a Raspberry Pi 4 8GB: Setup and Real Limits
- DiffusionGemma Runs Locally: Google's Diffusion Text Model on a 12GB RTX 3060
- RTX 4090 vs RX 7900 XTX
- CompactFlash Boot Drive for Windows 98: Transcend CF133 Setup and Benchmarks
- Best Game Controller for PC and PS5 in 2026
- Best 2.5" SATA SSD to Upgrade a PS4 Pro in 2026
- RTX 5090 vs RX 9070 XT: Specs, Gaming & AI Compared
- RTX A6000 48GB vs RTX 3090 24GB for Production LLM Inference (2026)
- Ollama vs LM Studio vs GPT4All on a 12GB GPU (2026)
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- On-Device AI Keyboards: What a Sub-2GB LLM Needs to Run Local
- Intel Axes BigDL: Local-LLM Picks for Consumer GPUs in 2026
- Best 1440p 240Hz Gaming Monitors in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090