TNP 15FT PC Power Cord, 3 Prong 10A 125V NEMA 5-15P to IEC C13, White
Bottom line: The TNP Products TNP 15FT PC Power Cord: 15 ft reach covers under-desk towers and across-room projectors; main trade-off: C13 only, so no fit for C5 cloverleaf or C7 figure-8 devices.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 15 ft reach covers under-desk towers and across-room projectors
- ✓ IEC C13 to NEMA 5-15P fits most PCs, monitors, printers, PS3
- ✓ 10A 125V grounded three-wire rating keeps chassis ground intact
- ✓ Fully molded connector housings resist pin wobble and flex damage
Cons
- ✗ C13 only, so no fit for C5 cloverleaf or C7 figure-8 devices
- ✗ 15 ft of slack needs managing behind a tight desk or rack
- ✗ 10A 125V limits it to North American 120V outlets
- ✗ White jacket shows dust and stands out against dark builds
Manufacturer description
The TNP 15FT PC Power Cord is the replacement AC cable for any desktop, monitor, printer, or console that uses a detachable 3-pin connector. It terminates in an IEC320 C13 female socket on the device end and a NEMA 5-15P three-prong grounded plug on the wall end, rated 10A at 125V, so it drops straight into desktop PCs, scanners, laser printers, LED TV monitors, projectors, powered speakers, and the Sony PlayStation 3. At 15 feet, it is built for the situation a stock 6-foot cord fails: a tower under the far side of the desk, a projector across the room, or an outlet you cannot reach without…
SpecPicks Verdict
SpecPicks scored TNP Products TNP 15FT PC Power Cord using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. TNP Products's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this power cord work with my desktop PC and monitor?
Yes, if the device has a removable cord with a 3-pin shroud socket. The cable uses an IEC320 C13 female connector, the standard on desktop PCs, LED TV monitors, laser printers, scanners, projectors, and powered speakers.
Does this cord fit the PlayStation 3?
Yes. TNP lists the Sony PlayStation 3 as a supported device, since the PS3 uses the same 3-prong IEC C13 removable power connector as a desktop PC.
What are the electrical ratings on this cable?
It is rated 10A at 125V and wired as a three-wire grounding cord, hot-neutral-ground. The NEMA 5-15P plug is the standard North American three-prong grounded plug for 125V maximum.
Is 15 feet too long for a standard desk setup?
For a tower sitting next to the outlet, yes, 6 ft is easier to manage. Choose the 15 ft length when the outlet is across the room, behind furniture, or when you want to skip a separate extension cord.
Is it worth replacing a stock cord with this one?
It is positioned as a commodity accessory. Replacing a frayed, overused, or missing cord with a fully molded grounded cable is the intended use case.
Key Features
- Replacement power cord for most models of a desktop PC computer, scanner, printer, LED TV monitor, projector, powered speakers, laser printer, Sony PlayStation 3 PS3 and more that have a removable power cord and use the 3-pin shroud power connector
- Replace an existing overused, old, broken, damaged, or misplaced power cable or add extra distance / extension between devices for convenience
- Female to male cable connects from your equipment socket to a standard 3 pronged AC outlet receptacle; The female connector plugs directly into the device while the male connector plugs into a standard outlet wall plug
- Fully molded design for reliable, resilient, maximum safety, durability and long life
- Connectors: 3-pin Shroud female (IEC320 C13 / IEC C13) to 3-prong grounded plug male (NEMA 5-15-P)
Full Specifications
| Brand | TNP Products |
|---|---|
| Color | White |
| Gauge | 18 |
| Voltage | 125 volts |
| Plug Type | Type B |
| Connectors | 3-pin Shroud female (IEC320 C13 / IEC C13) to 3-prong grounded plug male (NEMA 5-15-P) |
| Unit Count | 1 Count |
| Item Length | 180 inches |
| Plug Format | Type B |
| Model Number | LYSB01N237QI9-CMPTRACCS |
| Compatibility | PC, PS3 |
| Input Current | 15 A |
| Mfr Part Number | CBL_SVT18_C13_15F_WT |
| Connector Gender | Male-to-Female |
| Number of Outlets | 1 |
| Number Of Conductors | 3 |
| Power Cord Prong Count | 3 |
Ready to buy?
TNP 15FT PC Power Cord, 3 Prong 10A 125V NEMA 5-15P to IEC C13, White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput in 2026
- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- CPU Cooler Bracket Fix: How to Secure Your CPU When It Fails
- Arc A770 vs B580 for Local LLM Inference: 2025 Comparison
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a Secondary or Retro Build in 2026
- Reve 2.0 Debuts at #2 for Text-to-Image: Can You Run Local Image Gen on an RTX 3060?
- Best Budget Streaming Gear for Twitch in 2026
- Build a Silent Windows 98 Boot Drive with CompactFlash + IDE
- Ollama vs llama.cpp vs LM Studio on an RTX 3060 12GB: Which Local Runner Wins in 2026?
- Best SATA SSD for a PS4 Slim Storage Upgrade in 2026
- Forza Horizon 6 on the RTX 3060 12GB: 1080p and 1440p Settings Guide
- MSI Raider 16 Max HX Review: Elite Gaming and Creator Power
- Ryzen AI Max+ 395 Motherboard Guide: What You Can Upgrade
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- Build a Frigate AI Security-Camera NVR on a Raspberry Pi 4 8GB in 2026
- NVIDIA Bankrolls AI Startups to Tighten Its Chip Grip
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming
- Crucial BX500 vs Samsung 870 EVO vs SanDisk SSD Plus: Best Budget SATA SSD
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- Period-Correct 1999 Voodoo3 + Pentium III LAN Party Build Guide
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
- How to run Qwen 3 32B on Apple M4 (2026)
- Best RGB Lighting for a Gaming PC Desk: LED Strips and Case Fans Done Right
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090